···
Log in / Register

What is the weight of the Mazda CX-5?

6Answers
MacJulia
09/06/2025, 01:05:27 AM

The weight of the new Mazda CX-5 is approximately 2100KG. The specific weight can be found on the nameplate located on the lower side of the B-pillar of the Mazda CX-5, which indicates the vehicle's weight. The dimensions of the new CX-5 remain largely unchanged, with the wheelbase still at 2700 millimeters. Based on passenger experience, it is almost the same as the previous model. A heavier body generally provides better stability at high speeds. Other factors affecting high-speed stability include: 1. Vehicle tires: Tires are the only components in contact with the ground. Generally, wider and flatter tires improve stability at high speeds. 2. Vehicle shape: The vehicle's shape also affects high-speed stability. Vehicles with better aerodynamics tend to be more stable at high speeds. 3. Drive system: Common drive systems include front-wheel drive, rear-wheel drive, and four-wheel drive. Four-wheel drive vehicles are more stable than two-wheel drive ones. 4. Suspension system: Vehicles with independent suspension systems are generally more stable than those with non-independent systems. Independent suspensions include MacPherson strut and multi-link suspensions, among others.

Was this review help?
111
Share
OliviaFitz
09/18/2025, 12:57:19 AM

The curb weight of the Mazda CX-5 ranges approximately from 1,540 to 1,660 kilograms, depending on the model year and configuration. Gasoline engine models are generally lighter, around 1,550 kg, while diesel versions can weigh over 1,650 kg. The vehicle's weight impacts the driving experience; I find that lighter versions offer more agile handling in urban areas and easier parking, whereas slightly heavier models provide greater stability on highways without a floating sensation. When choosing a car, it's also important to consider how weight affects fuel efficiency and safety; heavier vehicles absorb more impact in collisions, often scoring better in safety tests, but may consume slightly more fuel. Overall, based on your daily driving needs—such as frequent long-distance travel—a heavier configuration might offer more peace of mind.

Was this review help?
19
Share
Expand All
StMia
11/01/2025, 01:24:28 AM

When driving the CX-5, I noticed its weight is usually around 1,560 kg, which isn't too heavy. This makes its starts and acceleration smooth—it doesn't lurch forward suddenly like some smaller cars, but it's not sluggish either. In daily driving, the weight helps filter out bumps on rough roads, making the ride comfortable. In terms of fuel efficiency, the weight of around 1,600 kg has a slight impact on fuel consumption, averaging about 8-9L/100km in city driving. However, on smooth roads, the weight can actually help save a bit of fuel. Safety is equally important—the weight aids in stability, reducing skidding on rainy days. It's a good reminder for everyone to regularly check the braking system to prevent wear and tear.

Was this review help?
15
Share
Expand All
VanCassidy
12/15/2025, 12:33:00 AM

The curb weight of the Mazda CX-5 ranges approximately between 1,550-1,650 kg, depending on engine size and additional equipment. Weight directly impacts safety performance; research shows that heavier vehicles can disperse more impact force during collisions, enhancing protection levels. Simultaneously, weight affects handling feel; the body feels more planted during turns with less floatiness, though acceleration may feel more gradual. When selecting configurations, consider how vehicle weight influences fuel consumption; lighter models save fuel, while heavier ones offer better stability. Ultimately, safety should always take priority.

Was this review help?
10
Share
Expand All
McCassidy
02/04/2026, 01:25:09 AM

The weight of the CX-5 typically ranges between 1540-1620kg, depending on the model. I find this particularly crucial because vehicle weight directly impacts fuel efficiency; a lighter body saves fuel, averaging around 7.5-8.5L/100km, which is much more environmentally friendly by reducing carbon emissions. On the road, its moderate weight prevents it from feeling cumbersome, offering agility for city commuting without consuming excessive fuel on highways. From an environmental perspective, lightweight design proves more economical for long-term use. It's advisable to choose the appropriate configuration based on driving habits to balance efficiency and safety.

Was this review help?
5
Share
Expand All
MacMatteo
04/29/2026, 05:44:26 PM

The Mazda CX-5 has a curb weight ranging from approximately 1560kg to 1680kg. Compared to SUVs in the same class like the CR-V at 1550kg, the CX-5 might be slightly heavier, but it offers a stronger sense of handling. It feels more stable when taking turns and provides greater confidence on highways. For family use, the added weight contributes to a more spacious and comfortable ride, though it's important to be mindful of the impact on fuel consumption and to maintain the brake system regularly to prevent wear. Personally, I don't see the weight as a major issue; when choosing a car, I prioritize space and driving enjoyment more.

Was this review help?
2
Share
Expand All
More Q&A

What does the small light next to the headlight mean?

The small light next to the headlight is a width indicator, installed on the car to indicate the vehicle's width. The width light is used during evening driving to make the vehicle visible to others. Automotive lights include night running lights, signal lights, fog lights, night driving lights, etc. Each type of light serves a different purpose, and their usage requires careful consideration—neither misused nor neglected. Below is a detailed introduction: Signal lights: These include turn signals (hazard lights) and brake lights. Proper use of signal lights is crucial for safe driving; Turn signals: These lights are activated when the vehicle is turning, flashing intermittently to alert surrounding vehicles and pedestrians. The timing of turning on the signal is important—it should be activated about 100 meters before the turn. Turning it on too early may give the impression of forgetting to turn it off, while turning it on too late may catch following vehicles and pedestrians off guard, leading to mistakes. Brake lights: These lights are very bright and are used to inform the following vehicle that the front vehicle is slowing down or stopping. Improper use of these lights can easily lead to rear-end collisions. Additionally, when replacing brake light bulbs, note that domestic vehicle taillights often have dual-function bulbs, with two filaments inside—the weaker one for the small light and the stronger one for the brake light. Some manufacturers design them as high-low pin inserts for easy use. Be careful not to reverse the connections during replacement. Fog lights: These help improve visibility during foggy conditions and ensure that oncoming vehicles can spot you early, allowing them to take necessary safety measures. Therefore, drivers must use fog lights in foggy conditions and should not substitute them with small lights. Night driving lights: During nighttime driving, ensure the vehicle's low beams are on. If the driving environment lacks lighting and is completely dark, high beams may be used.
117
Share

Can Jinxi Axle Be Held Long-Term?

Currently, it can only be traded by buying low and selling high, and is not suitable for long-term holding. Below is a detailed introduction about Jinxi Axle: 1. Overview: Jinxi Axle is a joint-stock company established in December 2000 through restructuring, with Jinxi Machine Industrial Group Co., Ltd. as the main sponsor; in May 2004, it publicly issued 40 million A-shares and was listed on the Shanghai Stock Exchange; the total share capital is 102.91 million shares, with the controlling shareholder Jinxi Group holding 45.61% of the shares; it has a wholly-owned subsidiary, Jinxi Railway Vehicles Co., Ltd.; the actual controlling entity is China North Industries Group Corporation. 2. Business Scope: Production and sales of railway vehicle parts, axles, precision forging products, and related technical consulting services; equipment maintenance; design, manufacturing, and sales of non-standard equipment. The company engages in the export of its self-produced products and technologies; imports of raw materials, instruments, machinery, spare parts, and technologies required for production (excluding goods and technologies restricted or prohibited by the state); and processing with supplied materials and compensation trade business.
107
Share

Can the Lost Driver's License Still Be Used After Replacement?

According to Article 123 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" issued by the Ministry of Public Security: If the original driver's license is lost and the original license is found after applying for a replacement, the driver must surrender the original license to the vehicle management office or destroy it personally, and must not use both licenses simultaneously. Each driver's license has a unique serial number and is subject to computerized traceability management. After a driver applies for a replacement license, the original license and its serial number will be marked as invalid in the driver's license management system. To apply for a replacement motor vehicle driver's license, the driver must meet the following conditions: The applicant's demerit points in the current scoring cycle have not reached 12; The motor vehicle driver's license is not under circumstances such as being seized, detained, temporarily suspended, revoked, canceled, or annulled by law. For drivers holding a motor vehicle driver's license issued by another province or city who apply for a replacement license in this city, in addition to meeting the above conditions, they must also apply for a license transfer. Application Locations: Foreign nationals should apply at the vehicle management office; Foreign nationals (excluding diplomatic personnel) can apply at the vehicle management office or any of its six branches; Other applicants may choose to apply at any branch of the vehicle management office, traffic police detachment or team vehicle management station, driver's license replacement service point, or postal agency. Documents to Submit: The identity proof of the motor vehicle driver: If applying through an agent, the agent's identity proof must also be submitted. If the application form does not bear the signature of the principal, a separate power of attorney must be submitted; Two photographs of the motor vehicle driver: (Photo requirements: The photo must be a straight-edged, front-facing, bareheaded, color, half-length portrait of the applicant taken within the last six months before applying for the driver's license. The background must be white; no uniforms should be worn; the image should be clear, with good contrast, natural expression, and no obvious distortion. The photo size should be 32mm×22mm, equivalent to 1 inch, with the head width between 14mm~16mm and head length between 19mm~22mm).
107
Share

What are the reasons for the EPC light to illuminate?

The main reasons for the EPC indicator light to stay on include faults in the engine intake system, throttle valve issues, fuel system malfunctions, engine problems, ECU control unit failures, and brake light faults. The EPC indicator light can illuminate in two states: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle checks the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light stays on under other circumstances or does not turn off for a long time after the vehicle is started, it indicates a problem. When the EPC light illuminates, the owner can first try to turn off the engine and restart it to see if the EPC light remains on. If it does not light up again, there may be no issue, possibly just the EPC indicator being affected. If the EPC light stays on or frequently illuminates, the vehicle should be taken to the nearest repair facility for professional diagnosis and troubleshooting to eliminate potential safety hazards promptly. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When the sensor data in the system is abnormal, the EPC system will take measures on the powertrain according to preset procedures. Common EPC indicator lights usually display two colors: yellow and red. If the EPC fault light is yellow and the vehicle can still operate normally, drive slowly to a repair point for inspection. If the EPC fault light is red, it indicates a more serious situation. The vehicle should be pulled over immediately, and relevant repair personnel should be contacted for maintenance. Continuing to drive under these conditions may directly affect the vehicle's core components or driving safety. Below are detailed explanations of other reasons that may cause the EPC light to illuminate: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with throttle valves. Additionally, dirt on the main body can affect intake, causing the indicator light to illuminate. Fuel system fault: Examples include substandard fuel, deteriorated fuel, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with the intake valves and other powertrain components can also trigger the EPC light. ECU control unit fault: For instance, interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: Situations such as brake lights not working, faulty brake switches, or brake circuit issues. Solutions for when the EPC indicator light illuminates: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle valve, etc. Remove carbon deposits from relevant parts. Re-flash the ECU with relevant data.
105
Share

What causes the ABS warning light to illuminate in Auman trucks?

ABS warning light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding wheel speed signal. This prevents the ABS control module from determining the vehicle speed and wheel slip rate, thereby failing to issue appropriate commands to regulate braking. Solution: Clean the contaminants from the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal operation. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can cause signal issues leading to system malfunction. Solution: Inspect wiring connections and reconnect any loose terminals. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple electrical components are in use, causing battery voltage to drop below 10.5V, the ABS warning light may illuminate. As engine speed increases and voltage rises, the light turns off. This may also indicate insufficient power supply voltage to the ABS system due to poor terminal contact or grounding issues. Solution: Check battery specific gravity; inspect the charging system; examine power supply components (such as voltage relays or poor power connections). State 3: ABS warning light remains illuminated after engine start until engine IGFF. Cause: Poor grounding connection of ABS hydraulic valve body; poor electrical connector contact at ABS hydraulic valve body; ABS control module failure. Solution: Loosen and retighten the hydraulic valve body ground screw, cleaning the contact surface if necessary; check for enlarged connector gaps; replace ABS or ABS/ASR control module. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control module detects excessive difference between rear and front wheel speeds; incorrect tire or wheel rim specifications. Solution: Refer to vehicle's specified tire and wheel rim dimensions, typically found on the label near the fuel filler cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of brake light switch; poor internal contact in brake lights. Solution: With engine running, depress brake pedal, manually push brake switch linkage fully downward, then release brake pedal to complete self-positioning; replace brake light switch if necessary. When the ABS warning light is illuminated, it is advised not to continue driving as this indicates a malfunction in the anti-lock braking system. During emergency braking, if wheels lock up, the vehicle may skid uncontrollably, preventing the driver from decelerating or adjusting the vehicle's trajectory, posing significant safety risks.
109
Share

Can You Drive When Water Submerges the Car's Undercarriage?

It is possible to drive when water submerges the car's undercarriage, but you must maintain a low speed, not exceeding 40 km/h, and promptly turn on the windshield wipers and parking lights. Use low beams in dim lighting and defog the windows as soon as they become blurry. When changing lanes, turning, or stopping, signal in advance to alert vehicles behind you. Below are precautions for driving in rainy conditions: 1. Reduce Speed: Regardless of road width or surface conditions, drive slowly in the rain, always monitoring the distance between vehicles ahead and behind, and be mentally prepared to take emergency measures. Visibility is poor in rainy weather, and braking distances increase, so reduce speed early to allow ample time and space to react safely. 2. Maintain Distance: Rain obstructs visibility, so keep a safe following distance and monitor the space between vehicles. Stay especially clear of large trucks—they block your view, and puddles passable for trucks may not be for smaller cars. Trucks can also splash water, disrupting smaller vehicles. 3. Use Fog Lights: Enhance safety by utilizing fog lights in rainy conditions. If necessary, turn on hazard lights to ensure trailing vehicles remain aware of your movements. 4. Do Not Restart After Stalling: In heavy rain or storms, some roads may flood quickly. If you must drive through water, do so at a steady speed in a low gear. If the engine stalls, do not attempt to restart it—doing so blindly could severely damage the engine. Instead, contact a repair shop immediately. Only restart the vehicle after a technician confirms it is safe.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.