···
Log in / Register

What is the tire model of the Lynk & Co 03?

6Answers
Grant
07/29/2025, 08:53:05 AM

The Lynk & Co 03 has four tire specifications: 215/50R17, 245/35R19, 245/40R18, and 225/45R18. In 215/50R17, the first number 215 represents the tire width of 215MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 17 represents the rim diameter of 17 inches. The letter "R" in the middle denotes a radial tire. In 245/35R19, the first number 245 represents the tire width of 245MM, 35 indicates the aspect ratio of the tire section is 35%, meaning the section height is 35% of the width, and 19 represents the rim diameter of 19 inches. The letter "R" in the middle denotes a radial tire. In 245/40R18, the first number 245 represents the tire width of 245MM, 40 indicates the aspect ratio of the tire section is 40%, meaning the section height is 40% of the width, and 18 represents the rim diameter of 18 inches. The letter "R" in the middle denotes a radial tire. In 225/45R18, the first number 225 represents the tire width of 225MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, and 18 represents the rim diameter of 18 inches. The letter "R" in the middle denotes a radial tire. The tire brand for the Lynk & Co 03 is Goodyear, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely loosen the nuts, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, completely remove the nuts; Place the new tire on the hub, align the tire rim with the wheel bolts, install the lug nuts, tighten the nuts, and the tire replacement is now complete. In addition to the model, the tire also has the following common data marked: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Rim specification: indicates the rim specification compatible with the tire.

Was this review help?
110
Share
JoshuaMarie
08/13/2025, 09:36:24 PM

I've been driving the Lynk & Co 03 for almost two years, and the tire specifications vary depending on the configuration. Common sizes include 215/55 R17 or 235/45 R18—mine is the 17-inch wheel version with 215 width. Tire specifications are pretty important as they affect handling stability and comfort—wider tires provide better grip, while higher aspect ratios cushion vibrations better. I remember driving in the rain once, and these Continental ContiMaxContact MC6 tires performed very steadily without any skidding. It's crucial to choose the right tire size when replacing them, or it could compromise safety. Usually, I recommend checking the tire manual or the label on the door frame for specific details, regularly checking tire pressure, and replacing them promptly if they're heavily worn.

Was this review help?
10
Share
Expand All
DelSara
10/09/2025, 02:26:11 AM

As someone who frequently helps friends with car repairs, the standard tire specifications for the Lynk & Co 03 are generally 215/55 R17 or 235/45 R18. In these numbers, 215 represents the tire width in millimeters, 55 is the aspect ratio, and R18 indicates a wheel diameter of 17 or 18 inches. The matched Continental or Pirelli brands focus on balanced performance. Tire size affects the vehicle's dynamics; neither too large nor too small is ideal, and the load index and speed rating must match the original design. When replacing tires, check if the rims are compatible, as incorrect sizes can lead to imbalance or vibration. Additionally, don't overlook daily maintenance, such as inspecting wear every 5,000 kilometers. Even wear on the inner and outer sides can extend tire life. If you encounter unusual noises or uneven wear, get it checked immediately—safety first.

Was this review help?
6
Share
Expand All
ORhett
11/22/2025, 02:41:51 AM

My buddy drives a Lynk & Co 03, and he says it's got 18-inch 235/45 tires that look really cool and feel great to drive. This size usually comes with high-performance tires like Pirelli P Zero, where the dimensions directly affect cornering grip and visual impact. Driving in the city is fine, but on highways, small bumps cause much less vibration. If the tires show signs of aging or damage, deal with them quickly to avoid a high risk of blowouts. Remember to ask about the configuration when buying a car—higher trims might have bigger, cooler tires. Maintenance is simple: just check the tire pressure monthly and keep it around 220kPa.

Was this review help?
5
Share
Expand All
HarperLee
01/12/2026, 09:29:29 PM

After using the Lynk & Co 03, I found that the tire sizes vary by trim level. The base model comes with 215/55 R17, while the sport version may have 235/45 R18. Tire dimensions affect driving quality—narrower tires save fuel while wider ones offer better stability. Always check the manual before replacement; don't buy randomly as OEM designs account for wheel arch space and safety standards. I make it a habit to rotate tires every six months to prevent uneven wear, while also checking tread depth and cracks—replace them when worn. The tire pressure monitoring system provides warnings, but don't rely on it entirely. Proper maintenance can extend tire life by tens of thousands of kilometers, saving money and ensuring peace of mind. I recommend choosing reputable brands like Continental, ideally matching the original size.

Was this review help?
10
Share
Expand All
VonFinley
04/09/2026, 01:05:55 AM

Friends driving the Lynk & Co 03 often ask me about tire issues, with common models being 235/45 R18 or 215/55 R17. The size is matched with the vehicle's tuning to balance comfort and sportiness. When upgrading, you can opt for larger 18-inch tires to enhance handling, but you need to assess the impact on fuel consumption—it might differ by a few tenths per liter. The original tires use Continental tires, which are durable and excel in high-speed quiet design. When replacing tires, don't just go for the cheapest option; ensure the speed rating (H or V) matches the speed limit. Daily driving should avoid sudden braking to prevent tire damage, and tire pressure should be kept within the standard range (specific numbers are on the door sticker) to extend usage. Maintenance is recommended every 6 months to ensure no slipping during rainy conditions.

Was this review help?
9
Share
Expand All
More Q&A

Can Changing to Better Engine Oil Reduce Fuel Consumption?

Changing to better engine oil can reduce fuel consumption. Here are some relevant introductions about engine oil: 1. Engine oil change cycle: It is best to change the engine oil every 5,000 kilometers or once a year, whichever comes first. This can be appropriately extended or shortened based on different driving environments, driving habits, and other factors. Below are the steps for changing engine oil: Run the engine; Drain the oil; Unscrew the oil filter; After all the oil has drained out; Pour an appropriate amount of oil into the oil filler port; Start the engine and listen for any abnormal noises in the vehicle. 2. Classification of engine oil grades: Engine oil grades are classified according to quality and viscosity grades. Oil for gasoline engines is usually represented by the letter S, while oil for diesel engines is usually represented by the letter C. Engine oil is composed of base oil and additives, where the base oil is the main component of the lubricant, determining its basic properties, and additives can improve the deficiencies of the base oil.
108
Share

What is the method for resetting the Cadillac maintenance reminder?

Here is the method to reset the Cadillac maintenance reminder light: 1. Press the ignition switch to start the engine. 2. Observe the dashboard for the maintenance prompt. 3. Press the SET button on the multifunction steering wheel. Then press the SEL button on the right side of the multifunction steering wheel. Finally, press the cancel button on the multifunction steering wheel to complete the reset. Here are some related details: 1. When the Cadillac maintenance light comes on, it reminds you to take the car for maintenance. When you take it to a 4S shop for maintenance, the technicians there will reset the maintenance light for you using a diagnostic tool after the service. Of course, if you perform the maintenance yourself, you will need to manually reset the reminder. 2. If you do not reset the maintenance light, the next maintenance mileage and time will become confusing, making it easy to miss the optimal maintenance period. Delaying maintenance can lead to many hidden dangers, as some minor issues in the car may not be easily visible to the naked eye. Over time, these can accumulate and lead to car malfunctions. In summary, it is essential to reset the maintenance reminder after servicing.
117
Share

Why Doesn't the Wiper Clean Properly?

If the wiper doesn't clean properly, it may be due to incorrect positioning or the need to replace the rubber strip. Below is relevant information about wipers: 1. Wiper switch position: The wiper switch for most vehicles on the market is located on the right-hand stalk behind the steering wheel, typically in a stalk-style design. Similar to the light stalk, the wiper stalk has various function symbols printed on it. Although the symbols and their positions may vary between brands, the functions are generally similar. 2. How to use the wiper: Icon – Manual operation. Push the stalk upward, and the wiper will start working continuously. Release the stalk, and it will automatically return to its original position, stopping the wiper. Suitable for clearing small amounts of water or debris from the windshield. OFF – The front wiper stops working. INT – Automatic intermittent operation. Pull the stalk down one notch, and the wiper will start working intermittently. This setting requires manual resetting and is suitable for light rain or snow. LO – Continuous operation. Pull the stalk down another notch, and the wiper will operate continuously at a steady rate. This setting also requires manual resetting and is suitable for heavier rain or snow. HI – Continuous high-speed operation. Pull the stalk all the way down, and the wiper will operate at high speed. This setting requires manual resetting and is suitable for heavy rainstorms.
103
Share

Is it allowed to cross the line when turning right at a traffic light?

It is not allowed to cross the line when turning right at a traffic light. Here is some related information about traffic lights: 1. The origin of traffic lights: In the early 19th century, in the city of York in central England, women wearing red clothes indicated they were married, while those wearing green clothes were unmarried. Inspired by this, on December 10, 1868, the first urban street signal light was designed and manufactured by British mechanic De-Hart. It was a 7-meter-high lamp post with a red and green gas traffic signal light. In 1914, the first electric signal light appeared in Cleveland, USA. 2. Rules for traffic lights at intersections: When encountering a red light, vehicles (including bicycles, motorcycles, and electric vehicles) cannot proceed straight or turn left; the rules for turning at traffic lights state that U-turn vehicles do not depend on the traffic light status, but must ensure safety when turning left.
108
Share

Can You Still Drive After Losing 12 Points?

Losing 12 points means you cannot drive and must complete a learning course before being allowed to drive again. Below are relevant details about point deductions: 1. Scoring Cycle: The cumulative scoring cycle for road traffic safety violations (i.e., the scoring cycle) is 12 months, with a maximum of 12 points, calculated from the date the motor vehicle driver's license is initially issued. Therefore, the initial issuance date of the driver's license is the reset date, with each anniversary marking a new scoring cycle. 2. Point Deduction Rules: (1) Driving under the influence of alcohol. (2) Allowing someone without a valid driver's license or whose license has been revoked or suspended to drive your vehicle. (3) Driving at a speed exceeding 50% of the posted limit. (4) Driving a modified vehicle or one that has reached the scrapping standard. (5) Being involved in a major traffic accident that constitutes a crime. (6) Accumulating 12 points within a single scoring cycle.
112
Share

How to Repair the Water Temperature Gauge and Its Control Circuit?

The solution is to replace or install the thermostat. The water temperature gauge rises to 95°C, and both the upper and lower hoses are equally hot to the touch. The cause is a damaged fan, and the solution is to replace the fan. Below are relevant details about the water temperature gauge: 1. Introduction: The water temperature scale ranges from C to H. C represents 60 degrees; once the needle points to C, it indicates the water temperature has reached 60 degrees. The red H mark represents 110 degrees, and the span from 60 to 110 degrees allows estimation of the indicated temperature. 2. Normal Range: The engine coolant temperature should not be too low or too high; it must stay within a certain range. The normal temperature is at the center of the gauge, 90°C. After starting the vehicle, the coolant temperature rises rapidly. Once the needle reaches the center position, heat exchange balances out, and the coolant temperature stabilizes. Generally, it's best to start driving when the temperature reaches the middle position, which is one reason why vehicles need to warm up before driving.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.