···
Log in / Register

Is it allowed to cross the line when turning right at a traffic light?

1Answers
MadisonRose
07/25/2025, 12:19:42 AM

It is not allowed to cross the line when turning right at a traffic light. Here is some related information about traffic lights: 1. The origin of traffic lights: In the early 19th century, in the city of York in central England, women wearing red clothes indicated they were married, while those wearing green clothes were unmarried. Inspired by this, on December 10, 1868, the first urban street signal light was designed and manufactured by British mechanic De-Hart. It was a 7-meter-high lamp post with a red and green gas traffic signal light. In 1914, the first electric signal light appeared in Cleveland, USA. 2. Rules for traffic lights at intersections: When encountering a red light, vehicles (including bicycles, motorcycles, and electric vehicles) cannot proceed straight or turn left; the rules for turning at traffic lights state that U-turn vehicles do not depend on the traffic light status, but must ensure safety when turning left.

Was this review help?
108
Share
More Q&A

What is the principle of a reducer?

The principle of a reducer is: to achieve the purpose of deceleration by meshing the gear with fewer teeth on the input shaft of the reducer with the larger gear on the output shaft, which is driven by a motor, internal combustion engine, or other high-speed power source. The reducer plays a role in matching speed and transmitting torque between the prime mover and the working machine or actuator, and is a relatively precise mechanical device. There are various types of reducers. According to the transmission type, they can be divided into gear reducers, worm reducers, and planetary gear reducers; according to the number of transmission stages, they can be divided into single-stage and multi-stage reducers; according to the gear shape, they can be divided into cylindrical gear reducers, bevel gear reducers, and bevel-cylindrical gear reducers; and according to the arrangement of the transmission, they can be divided into expansion reducers, split-flow reducers, and coaxial reducers.
101
Share

What engines does Changan Automobile use?

Changan Automobile uses the following engines: 1. In the early stages, it mainly used the H-series engines, which are inline 4-cylinder, 16-valve, all-aluminum engines. These are the results of Changan Automobile's independent research and development by integrating international advanced technologies, possessing complete independent intellectual property rights; 2. Jiangling brand engines produced by Jiangling Machinery Factory, a subsidiary of Changan Group. The Escort is a compact sedan produced by Changan Ford, featuring a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. Its body dimensions are 4587mm in length, 1825mm in width, and 1490mm in height, with a wheelbase of 2687mm. In terms of power, it is equipped with a 1.5L naturally aspirated engine, paired with a 6-speed automatic transmission.
111
Share

Where is the engine number of the Buick Excelle located?

The engine number of the Buick Excelle is located in the engine compartment, specifically near the lower part of the engine pulley. The engine number is the unique identifier for each engine, and no two engines share the same number. Typically, an engine number consists of a head section, middle section, rear section, and tail section, representing information such as the product code, number of cylinders, manufacturing details, and structural features. The Buick Excelle is a compact sedan produced by SAIC-GM Buick, with body dimensions of 4468mm in length, 1765mm in width, and 1469mm in height, and a wheelbase of 2611mm. The Buick Excelle is equipped with a 1.3-liter naturally aspirated engine across all variants, paired with either a 5-speed manual transmission or a CVT (continuously variable transmission).
114
Share

What is the function of a universal joint?

Universal joint, also known as universal coupling, is a mechanical component that enables variable-angle power transmission. It is used in positions where the direction of the drive shaft needs to be changed and serves as the "joint" component in the universal drive system of an automobile. Non-constant velocity universal joint: When the angle between the two shafts connected by the universal joint is greater than zero, the motion is transmitted between the output shaft and the input shaft with a varying instantaneous angular velocity ratio, but the average angular velocity remains equal. Quasi-constant velocity universal joint: Refers to transmitting motion with equal instantaneous angular velocity at the designed angle, while transmitting motion with approximately equal instantaneous angular velocity at other angles. Constant velocity universal joint: The output shaft and input shaft connected by the universal joint transmit motion with always equal instantaneous angular velocity.
104
Share

How Many Types of Turbine Oil Are There?

Turbine oil comes in 12 types. Turbine Oil: Turbine oil, also known as turbine lubricating oil, typically includes steam turbine oil, gas turbine oil, hydraulic turbine oil, and oxidation-resistant turbine oil, among others. It is primarily used for lubricating the sliding bearings, reduction gears, governors, and hydraulic control systems of turbines and related units. The main functions of turbine oil are lubrication, cooling, and speed regulation. Oil Classification: China's turbine oil classification standard GB7631.10, equivalent to the ISO6743 standard, divides turbine oil into five major categories and twelve varieties based on their specific uses. Among them, steam turbine oil is subdivided into four grades: TSA, TSC, TSD, and TSE, while gas turbine oil is subdivided into five grades: TGA, TGB, TGC, TGD, and TGE. Among these, TSA, TSE, TGA, TGB, and TGE are mineral oil-based, with TSE and TGE being extreme-pressure turbine oils.
119
Share

Do You Need to Press the Clutch When Starting the Engine?

Starting the engine requires pressing the clutch, on one hand for easier ignition, and on the other hand for safety. Introduction to the Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. The clutch is a common component in mechanical transmission, allowing the transmission system to be separated or engaged at any time. Benefits of Pressing the Clutch When Starting: If the clutch is not pressed when starting the car, it increases the load on the engine and also harms the battery on the engine while starting the vehicle. Additionally, pressing the clutch when starting prevents the car from starting in gear, thereby avoiding potential safety hazards.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.