···
Log in / Register

What is the tire load rating?

6Answers
Joanna
07/29/2025, 11:02:13 AM

Tire load ratings are as follows: 1. 205/55R16-91V: Load index 91, corresponding to a maximum load of 615kg; 2. 225/55R17-97Y: Load index 97, corresponding to a maximum load of 730kg; 3. 205/60R16-92H: Load index 92, corresponding to a maximum load of 630kg; 4. 175/70R13-82T: Load index 82, corresponding to a maximum load of 475kg; 5. 235/55R19-101W: Load index 101, corresponding to a maximum load of 825kg.

Was this review help?
103
Share
VanAllison
08/13/2025, 03:39:30 AM

I've been driving for over a decade and always pay special attention to the tire load rating, which essentially indicates the maximum weight a tire can bear. For example, the common number 91 represents 615 kilograms. This directly relates to driving safety. I remember once overloading tires during a long-distance trip, which resulted in overheating and a blowout on the highway—it was almost a disaster. Since then, I always check the recommended index in the vehicle manual when changing tires to ensure they match the vehicle's weight—neither too high nor too low. I've also learned to regularly inspect tire wear and pressure to prevent aging from affecting load capacity. Ultimately, safe driving comes first; never skimp on this attention, especially when driving on highways or mountain roads, as it can easily lead to accidents.

Was this review help?
9
Share
Expand All
VonJanelle
10/11/2025, 02:04:38 AM

In my daily driving, the tire load rating is absolutely a crucial indicator. It refers to the load index, where a higher number indicates greater load capacity. I always emphasize safety first, because neglecting this index may lead to tire failure or loss of control, especially when fully loaded or driving on rough roads. To ensure safe travels, I make it a habit to check the code on the tire sidewall and use a mobile app to verify if the vehicle's load matches. Additionally, don't forget to consider road conditions and seasonal changes—for example, choosing a higher rating for snowy roads provides better stability. In short, don't cut corners when selecting tires, and regular maintenance checks can prevent major issues.

Was this review help?
14
Share
Expand All
DeJoseph
11/24/2025, 02:10:05 AM

As a budget-conscious driver, I believe the tire load rating is crucial, known as the load index, where the number corresponds to the weight it can bear. I once saved money by opting for cheaper tires with a lower index, which couldn't handle the load, leading to early deformation and higher repair costs. Now, when choosing tires, I first weigh my vehicle's total weight and match it with the appropriate index. For example, a family car can use a moderate rating to save money while ensuring safety. Avoid blindly opting for higher ratings unnecessarily, but ensure it matches to prevent imbalance at high speeds. Simply put, regularly check the tire markings to prevent issues—saving money should also be smart.

Was this review help?
9
Share
Expand All
AlanDella
01/14/2026, 03:42:11 AM

As a parent traveling with my child, I pay special attention to the tire load rating, as the load index value determines the safety of my entire family. If the index is too low and the vehicle is overloaded, there's a risk of tire blowout on bumpy roads. I once experienced a tire leak that terrified my child. Therefore, I now insist on choosing tires with a high load rating that matches the vehicle's weight. For example, a family SUV should use tires with a load index of 91 or above for greater peace of mind. It's also important to consider the load during long-distance trips, regularly checking tire pressure and wear to ensure a smooth journey. Remember, safety is no joke—start with the small details.

Was this review help?
9
Share
Expand All
MaggieLee
04/10/2026, 11:48:34 PM

From my observation, the tire load rating is quite straightforward—it's the load index, where the number indicates the maximum carrying capacity, such as 91 representing 615 kilograms. This is printed on the sidewall of the tire, and I always advise new drivers to learn how to read it to prevent vehicle overload, which can cause tire overheating or damage. When selecting tires, consider your vehicle type and driving habits; for example, a medium index is sufficient for city commuting. Also, pay attention to weather impacts and perform regular maintenance to avoid index discrepancies that could shorten the tire's lifespan. In practice, always refer to the manual's standards and don’t skip inspections out of laziness.

Was this review help?
4
Share
Expand All
More Q&A

What Causes the Jerking Sensation When Shifting Gears in Park for an Automatic Transmission?

Possible causes for the jerking sensation when shifting gears in park for an automatic transmission include: transmission clutch pressure leakage; obstructed transmission fluid passages; and transmission fluid not filled to the standard level. 1. Reasons for the jerking sensation when shifting gears in park for an automatic transmission: Internal clutch pressure leakage in the transmission. Check if the clutch is damaged. The transmission fluid passages are also obstructed. Wear on the valve body, long-term lack of transmission fluid changes leading to degradation and reduced lubrication effectiveness, a dirty transmission filter reducing filtration efficiency, allowing wear particles to enter the valve body. 2. Additional tips: Techniques to resolve gear shifting jerking: The key during gentle acceleration is to press the accelerator slowly, lift the foot lightly, and then press again. Automatic transmissions generally complete gear shifts at low RPMs, effectively addressing the issue of jerking during gear shifts.
104
Share

What are the reasons for the rapid consumption of Audi coolant?

Audi coolant is consumed quickly due to the following reasons: 1. There may be a coolant leak; 2. Poor circulation leading to rapid consumption; 3. Coolant entering the cylinders and being burned or entering the oil pan. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase of 3024mm, fuel tank capacity of 73l, and curb weight of 1800kg. The 2020 Audi A6 features a five-link independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
110
Share

How to Determine if the Electronic Throttle Pedal is Damaged?

To determine if the electronic throttle pedal is damaged, check whether the car produces abnormal noises when the pedal is pressed or if the pedal fails to return to its original position. A damaged electronic throttle pedal can render the car unusable. The reasons for the EPC light illuminating in a car are: 1. Faults in the intake system, such as leaks or blockages; 2. Excessive dirt accumulation on the throttle; 3. The fuel grade not meeting the required standards; 4. Abnormal cylinder pressure; 5. System false alarms or occasional faults. The functions of the car engine EPC are: 1. Precise control of the throttle opening to improve fuel economy; 2. Rapid system response for satisfactory handling performance; 3. Integration of idle speed control, cruise control, and vehicle stability control to simplify the control system structure.
120
Share

What are the differences between the Mercedes-Benz 2.5t and 3.0t?

Mercedes-Benz 2.5t and 3.0t differences are: 1. Different body dimensions: The Mercedes-Benz 2.5t has a body length, width, and height of 4813mm, 1951mm, and 1761mm respectively; the 3.0t has dimensions of 4941mm, 2018mm, and 1782mm. 2. Different maximum horsepower: The Mercedes-Benz GLE 2.5t has a maximum horsepower of 333ps, while the 3.0t has a maximum horsepower of 367ps. Both the Mercedes-Benz 2.5t and 3.0t are equipped with a 9-speed automatic transmission; the front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension.
103
Share

What car is referred to as 'Broken Shoe'?

'Broken Shoe' refers to Porsche. This nickname comes from a homophonic play on words. Here is some related information about Porsche: 1. The Prancing Black Horse: The prancing black horse symbolizes Porsche's astonishing power. 2. The 'PORSCHE' Lettering: The word 'PORSCHE' appears at the top of the logo, indicating that the core emblem is owned by Porsche Design. 3. The 'Stuttgart' in the Center: The word 'Stuttgart' in the center represents the location of Porsche's headquarters, which is in the city of Stuttgart. 4. The Surrounding Emblem: The surrounding emblem is derived from the coat of arms of the state of Baden-Württemberg and is framed with the colors of the German flag—black, red, and yellow—together forming an inspiring shield.
101
Share

How to use the automatic start-stop function in the Sylphy?

The method to use the automatic start-stop function in the Sylphy is: press the automatic start-stop switch located on the center console. The automatic start-stop switch uses a mechanical button, and its main purpose is to save energy and reduce exhaust pollution. Turning off the automatic start-stop allows the driver to have better control of the vehicle. Taking the 2021 Nissan Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, minimum ground clearance 166mm, and curb weight 1188kg. The 2021 Nissan Sylphy is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122ps, maximum torque of 155nm, maximum power of 90kw, and is paired with a 5-speed manual transmission.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.