What is the method to reset the maintenance light on Chery Arrizo?

[MacJustin]

Turn off the ignition switch and shut down the engine. Locate the "Menu Switch" button on the steering wheel, which is the button with two overlapping squares. Press and hold the "Menu Switch" button, then turn the ignition switch to the "ON" position. After the car is powered on, it will begin self-inspection. Keep pressing the "Menu Switch" button during this time. Once the self-inspection is complete (approximately 5 seconds), the maintenance light will be reset. Restart the car, and the maintenance light will no longer illuminate. Although the maintenance light does not affect the vehicle's performance, if it lights up, the car should be taken for maintenance as soon as possible.

[RichardLynn]

I just helped a friend with this last week. Resetting the maintenance light on the Arrizo is actually quite simple. Park in a safe place, turn off the engine, then press and hold the small wrench-like button on the dashboard. Turn the key to the ON position (without starting the engine), wait for the maintenance menu to appear on the dashboard, then use the buttons on the right side of the steering wheel to select reset and confirm. The whole process takes no tools and can be done in a minute or two. Remember that the model year matters – for newer versions after 2019, the button might be on the left side, so check the manual to confirm. Don't rush to reset the maintenance light when it comes on; always check if the engine oil and filter have actually been replaced first to avoid engine damage from skipping maintenance.

[VanAva]

To reset the Arrizo maintenance light, follow these steps: After turning off the engine, press and hold the reset button (usually located in the center of the dashboard), then turn the key to the ON position for about five seconds until the light goes off. If there's no response, try turning on the ignition first and then pressing the button repeatedly a few times. I've seen many people at auto repair shops randomly pressing buttons and causing the menu to lock up, so avoid applying too much force during operation. The key is to locate the correct button position—newer models may integrate it into the steering wheel control area. After resetting, it's advisable to drive for a couple of days to check if the light reappears, as poor wiring contact can also trigger false alarms. In such cases, check the fuses or visit a shop to read the fault codes.

[SanBethany]

Having serviced several Arrizo models' maintenance lights, the summary is: turn off the ignition, press the SET button, turn the key to ON position and wait for the prompt. A reminder from veteran owners: Don't forget to release the brake pedal during operation as some vehicles have safety locks. If the light reappears after resetting, it might indicate incomplete recording of the last maintenance - revisit the repair shop to check the logbook. Additionally, regularly monitor the dashboard while driving as a constantly lit maintenance light may interfere with alarm signals.

[McEmmett]

I can use a mobile app to connect to the OBD port to reset the maintenance light, but the manual reset method for the Arrizo is more convenient. The general steps are: turn off the ignition, press and hold the 0.0 button, turn on the ignition, and wait a few seconds until the dashboard prompt disappears. Newer models with voice assistants can also reset via voice commands, but the button method is more reliable. Be careful not to press other buttons during the operation to avoid accidentally resetting trip data, which could affect fuel consumption calculations. Regularly resetting the reminder helps maintain accurate vehicle condition monitoring.

[McLondon]

It is recommended to go directly to a 4S shop or professional store for resetting, which is more worry-free, especially for beginners who may press the wrong buttons due to unfamiliarity. The conventional method involves turning on the power and pressing the reset button to view the menu operation. The principle is to reset the preset maintenance cycle data in the vehicle's system. Before attempting it yourself, remember to note down the dashboard display status so that in case of failure, you can inform the technician for quick handling. Additionally, resetting through formal channels after each maintenance can extend the system's lifespan.