···
Log in / Register

How to Handle a Driver's License with Over 12 Points Deducted?

6Answers
IsaacFitz
07/28/2025, 08:01:50 AM

If your driver's license exceeds 12 points, you will need to retake the Subject 1 exam. Passing the exam will clear the deducted points. Here is the detailed process: Traffic Safety Law Study: If a C1 driver's license is deducted 12 points, the license will be suspended. You must go to the traffic management department of the public security authority at the place where the driver's license was issued or where the violation occurred to undergo a 7-day (8 hours per day) study of road traffic safety laws. The total study hours must generally be completed within 15 days. Take the Subject 1 Exam: After completing the study, you must take the Subject 1 exam. Passing the exam (with a score of 90 or above) will reset the deducted points and allow you to renew your driver's license. If you fail the exam, you will need to reschedule and retake it until you pass.

Was this review help?
103
Share
LeDelaney
08/11/2025, 12:51:30 PM

If my driver's license points exceed 12, I'll take immediate action without delay, otherwise the license may be suspended and fined. The process is to bring my ID card to the local vehicle management office within 15 days of receiving the notice to register for traffic safety courses, which last about 5-7 days, covering road rules and case studies. After completing the course, there's an exam—the questions are simple but require serious review to pass easily. Passing the exam resets the points to zero, allowing you to continue driving; failing means retaking the course and exam. The cost ranges from 300-500 yuan, and it's not worth skimping on this expense. During this period, avoid driving, as driving without a valid license can result in fines of 200-2000 yuan and possibly more points deducted. I recommend paying attention to speed limits and traffic signals while driving daily, and regularly checking points using the 12123 APP to prevent surprises. Handle it promptly—don't procrastinate—safety first, to avoid regrets. By the way, making friends and sharing experiences during the course is also a good idea.

Was this review help?
4
Share
Expand All
LaJonathan
09/28/2025, 02:14:55 AM

Exceeding 12 points on your driver's license is a serious matter—don't take it lightly. Common reasons for point deductions include speeding or illegal parking, and the handling process isn't overly complicated: first, you'll receive a notice, then within 15 days, visit the DMV to apply for mandatory education. The study period lasts about a week, covering traffic laws and accident prevention. Passing the exam resets your points; otherwise, you'll need to retake it. Costs typically range between 300-400 RMB, paid out of pocket. During this process, your license is suspended, so absolutely avoid driving—getting caught will lead to harsher penalties or even revocation. As someone who frequently drives long distances, I've learned many lessons. Track your point cycle and use apps to monitor your score preventively. Reflecting on mistakes after resolution leads to safer driving and avoids future hassles. Remember: delaying risks losing your license entirely, forcing a costly and time-consuming retest. Head to the DMV promptly to settle this and drive with peace of mind.

Was this review help?
16
Share
Expand All
OKendra
11/11/2025, 03:09:34 AM

If your points exceed 12, stop driving immediately and study before retaking the test. Register for a traffic safety course at the DMV within 15 days. Study for a few days and pass the exam; if you fail, continue studying. You must cover the costs yourself—don’t skip this expense. Your license will be suspended during processing, and driving during this period will result in heavier fines and point deductions. Safety is crucial; don’t take it lightly. Regularly check your points via an app to avoid future issues. Handle it promptly for peace of mind.

Was this review help?
10
Share
Expand All
LaSilas
01/01/2026, 10:02:51 PM

Handling Over 12 Points Requires Clear Steps: Step 1, Submit an application to study traffic regulations at the vehicle management office within 15 days of receiving the notice. Step 2, Attend a one-week educational course covering basic rules and emergency handling. Step 3, Pass the theoretical part of the exam. Step 4, Points are reset, and the license is restored for use; retake if failed. Bring all required documents such as ID card and driver's license throughout the process. The cost is approximately 300-500 yuan. The exam content includes the latest traffic regulations, which must be thoroughly studied. Do not drive during the process to avoid fines and point deductions. It is recommended to use the Traffic Management 12123 APP to check point deduction records for assistance. Completion of the process can enhance safety awareness and reduce risks.

Was this review help?
14
Share
Expand All
LeJeffrey
03/29/2026, 11:12:54 PM

When I first started driving, my license points exceeded 12, which really scared me. But don't worry, the process is simple: First, go to the DMV to inquire and arrange for a traffic safety course. After a week of study, you'll take an exam. Pass it, and your points will be cleared; fail, and you'll have to try again. The cost is a few hundred yuan out of pocket, but don't stress—it's a small matter. Avoid driving during the processing period to prevent accidents. New drivers often get points for speeding, but handling it can teach you a lesson to drive more steadily. Use an app to check your points quickly for a prompt response. Taking timely action ensures you keep your license, giving you peace of mind. I suggest taking a break during the process to reflect on your driving habits, so you make fewer mistakes in the future, saving money and staying safe.

Was this review help?
9
Share
Expand All
More Q&A

Should an automatic transmission car be shifted to N or P gear for long-term parking?

For long-term parking of an automatic transmission car, it is recommended to shift to P gear (Park). Typically, automatic transmission vehicles have a dedicated parking gear (Park), which evolved from the N gear and is specifically designed for parking. Inside the transmission, there is a pawl mechanism that locks the gear on the output shaft, creating a mechanical lock to secure the drive axle and prevent the vehicle from moving or slightly shifting. Different situations call for different gear usage. For short-term stops, you can keep your foot on the brake and maintain the gear in D (Drive). For prolonged stops, such as waiting at a red light, you can shift to neutral (N) and engage the handbrake. However, a vehicle in neutral is prone to rolling, and relying solely on the handbrake for extended periods may reduce its clamping force, especially when parked on a slope, increasing the risk of rolling backward accidents.
114
Share

Will waiting until the fuel tank warning light comes on to refuel damage the car?

Waiting until the fuel tank warning light comes on to refuel can damage the car. Below are some relevant explanations about waiting until the fuel tank warning light comes on to refuel: Evaporation obstruction: The fuel level indicator usually relies on feedback from the fuel level sensor or inspection as the standard. Therefore, whether it is "fuel" or something else like "water," what it displays is merely a "scale" and does not indicate to the owner whether it is fuel or water. Even with higher-quality fuel, there is a certain "water content." If the vehicle continues to be used in this way for a long time, the water may deposit due to evaporation obstruction (sealing) (water settles at the bottom while fuel floats on the surface), making the indicator show "correct," when in fact, it could potentially cause the engine to stall at any time. Fuel pump: When the fuel level reaches the "warning" line, even if there are no issues with the fuel itself, it can "slosh" due to road bumps, turns, and other driving conditions, preventing the fuel pump from "pumping" fuel in time. This can lead to vehicle shaking, jerking, or stalling due to insufficient fuel supply. Due to the characteristics of certain vehicle models, the fuel pump relies on fuel for cooling. If the fuel level has already reached the lowest mark, the fuel pump may become "exposed" above the fuel surface, failing to receive timely cooling. This can accelerate internal wear, cause premature wear, or lead to internal short circuits and burning due to overheating.
116
Share

What are the differences between the imported and domestically produced Mazda CX5?

There are two main differences between the imported and domestically produced Mazda CX5. Below is a detailed introduction to these two differences: 1. Exterior design: (1) Imported version The upward-sloping waistline gives the car a forward-leaning posture, and the slightly sloping rear end is very much in line with its sporty design inspiration. (2) Domestically produced version The domestically produced version adds a roof rack to the imported version, providing convenience for travel. 2. Interior configuration: (1) Imported version Front and rear head airbags, keyless start, body stability system, hill assist, multifunction steering wheel, seat lumbar support adjustment, headlight height adjustment, electric heated mirrors, dual-zone automatic air conditioning, etc., are all standard across the range. (2) Domestically produced version There are still many areas that need improvement in detail processing compared to the imported version.
108
Share

How many types of tire models are there for the Audi Q5?

The Audi Q5 has two tire specifications: 235/55-R19 and 255/45-R20. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Typically installed on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain driving performance. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high/low temperatures during operation. Therefore, they must possess high load-bearing, traction, and cushioning capabilities. Additionally, they need to exhibit high wear resistance, flex resistance, and low rolling resistance with minimal heat generation. Here are some details about the Audi Q5: 1. The Audi Q5 adopts the previous generation of Audi's family design, featuring an inverted trapezoidal grille with large rectangular grids and relatively square-shaped headlights. The overall body lines are predominantly smooth yet exude a strong sense of power, with a dignified and stable design that is more widely accepted. 2. The center console is tilted toward the driver's side, accommodating a wider range of driver operations. The functional areas are neatly organized and clearly laid out, with buttons and knobs offering premium tactile feedback. In terms of features, the Audi Q5 provides comprehensive safety and comfort equipment. 3. For passive safety, it includes full-size airbags and front-seat side airbags (with head airbags). For active safety, it is equipped with systems such as lateral driving assistance, hill-start assist, and hill descent control to enhance driving safety.
104
Share

How to Adjust the Air Conditioning Temperature on the Tiggo 8?

The method to adjust the air conditioning temperature on the Tiggo 8 is as follows: There is a temperature adjustment knob on the dashboard of the Tiggo 8, with one side marked in red and the other in blue. Turning the knob fully to the red side will produce hot air, while turning it fully to the blue side will produce room-temperature air. To get cold air, you need to press the AC compressor switch to activate the cooling system. The air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. The Tiggo 8 has dimensions of 4700mm in length, 1860mm in width, and 1746mm in height, with a wheelbase of 2710mm. The vehicle's engine delivers a maximum horsepower of 156Ps, a maximum power output of 115kW, and a maximum torque of 230Nm.
108
Share

What is the difference between straight-only, one-way, and straight lanes?

The specific differences between straight-only, one-way, and straight lanes are as follows: Straight-only: No left turns, no right turns, only straight ahead. The border of a straight-only sign is a circle with a white arrow inside. One-way: Indicates that all vehicles must travel in one direction. This sign is placed at appropriate locations at the entrance and intersections of one-way roads. It has a square border with a white arrow inside, indicating a one-way road. Straight lane: A road can have multiple lanes, but this one is designated for straight travel only. The straight lane has a white arrow in the middle, a blue background, and white dashed lines on both sides.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.