What is the method to reset the maintenance light for the 2018 Haval H6?

[Gama]

Haval H6's maintenance light can be reset using a car computer or manually. Here are the relevant details: 1. After turning off the ignition switch, press and hold the trip meter reset button on the combination meter. Keep holding it while turning on the ignition switch. The odometer display will start counting down. When the display shows 0000.0, release the button. At this point, the wrench indicator light on the combination meter, which indicates maintenance operations, should turn off. Alternatively, you can visit a 4S shop to reset it using specialized equipment. 2. The manufacturer has already set the first maintenance for the Haval H6. After the first maintenance, the 4S shop will set the next maintenance reminder. The 'SERVICE' indicator on the instrument panel display is the maintenance cycle indicator. When the ignition switch is in the ON position, the 'SERVICE' indicator on the display flashes, and it disappears after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset.

[McDaniel]

I'm the type who loves tinkering with cars, having driven an 18-model Haval H6 for over three years now. Resetting the maintenance light is something I can easily do myself. First, turn the key to the ON position to power up the dashboard—make sure not to start the engine. Then, using the multifunction buttons on the right side of the steering wheel, repeatedly press the return arrow key until the dashboard displays the 'Maintenance Info' screen. At this point, you'll see a wrench icon; hold down the OK button on the steering wheel for five seconds without releasing. Once the dashboard starts the countdown, let go. Keep an eye on the screen throughout the process—once completed, the wrench icon will disappear. It's best to perform this operation in a well-lit garage to avoid pressing the wrong buttons. After resetting, remember to start the engine to confirm the indicator light is truly off; otherwise, you'll have to do it all over again.

[DelKeira]

This issue has been encountered several times. Resetting the maintenance light on the 2018 Haval H6 is actually quite simple. First, sit in the driver's seat without pressing the brake pedal and press the start button twice to power on the vehicle. At this point, all dashboard lights will illuminate. Locate the control area on the right side of the steering wheel and use the up and down arrow keys to navigate the menu. Scroll to the 'Maintenance' option in the vehicle settings and select it. Choose the reset option and then press and hold the OK button for five seconds. Note that during the hold, the dashboard will count down from 5 to 0. Wait until it displays 'Reset Successful' before releasing the button. It's recommended to check the manual to confirm the button locations before operating, as the layout of multifunction buttons may vary slightly depending on the configuration. After resetting, it's best to take a short drive to observe and ensure the operation was successful to prevent any misoperation.

[DeJade]

Share a reset method that I personally tested and found effective: Turn the key to the power-on position, immediately operate the menu button on the right side of the steering wheel, enter the system settings to find the maintenance option. Hold the OK button until the wrench icon flashes and disappears. The key is to operate before ignition, and the long press must last a full five seconds. If it prompts failure, it's likely due to incorrect timing; it's recommended to turn off the power and wait half a minute before trying again. Remember to perform maintenance every 5,000 kilometers for peace of mind.

[DelLaura]

Just helped my neighbor with this last week. There are a few key details to note when resetting the maintenance light on a 2018 Haval H6. First, power on the vehicle in ignition-off state, wait for the instrument cluster self-check to complete before operating the steering wheel buttons. Look for a submenu like 'Vehicle Information Maintenance' in the settings menu, then select reset instead of view. You must hold the OK button until the confirmation prompt pops up on the screen - your finger should ache to confirm proper execution. Operation errors may cause the warning light to flash, in which case you'll need to visit the dealership to clear fault codes with a diagnostic tool. Remember that the next service mileage will reset to zero after this procedure, so don't forget to record the date and stick it on the corner of the windshield.

[DelChristian]

I own the same model car, and resetting the maintenance light actually involves three steps: First, turn the ignition switch to the power-on position without starting the engine. Then, use the right steering wheel control button to locate the vehicle settings menu, scroll to the maintenance item, and press OK to confirm entry. The crucial step comes next—firmly press and hold the arrow-marked confirmation button for a count of five, watching the dashboard's countdown display. It's advisable to wipe the buttons beforehand to prevent slipping, especially in summer when sweaty hands can interfere with the operation. After completing the reset, take a short drive to ensure the indicator light doesn't reappear. As a side note, remember that scheduled maintenance should still be performed on time; the reset merely clears the reminder.