···
Log in / Register

What is the ground clearance of the BYD Song Plus DM-i?

6Answers
Rosalie
09/04/2025, 12:08:34 AM

The ground clearance of the BYD Song Plus DM-i is 18cm. Below is the relevant information: Introduction: On March 8, 2021, BYD launched its first model equipped with the DM-i system—the Qin Plus DM-i, which was promoted with an ultra-low fuel consumption of 3.8L/100km under battery-depleted conditions. Configuration: The DM-i system combines an engine with ultra-high thermal efficiency and an ultra-efficient EHS hybrid system, paired with power-type blade batteries. These three major components maximize efficiency under technological support, achieving incredible fuel economy. The system integrates all the advantages of the current three major hybrid types. Since the three-electric system is independently developed and manufactured, BYD can more easily control the benefits of plug-in hybrids, mild hybrids, and range-extender hybrids, perfectly integrating them together.

Was this review help?
101
Share
StCody
09/16/2025, 01:14:52 AM

I remember when I drove the BYD Song Plus DM-i, its ground clearance was about 17 cm, which was quite suitable for city driving. As an SUV, this height gave me peace of mind when going over curbs or descending slopes without worrying about scraping the undercarriage. Compared to other smaller cars, the higher ground clearance made driving feel more stable, especially on bumpy roads where the ride was noticeably smoother. During regular maintenance, I always paid extra attention to tire pressure because low pressure can reduce the actual clearance and potentially affect balance. I’d also recommend new drivers to opt for vehicles with higher ground clearance, as it can boost confidence. The Song Plus DM-i’s fuel efficiency is also impressive, making it a practical choice. If you frequently drive in urban areas, this height is definitely sufficient, but don’t expect it to handle serious off-road conditions.

Was this review help?
9
Share
Expand All
OConnor
10/30/2025, 01:49:00 AM

Regarding the ground clearance of the BYD Song Plus DM-i, from a design perspective, it is approximately 17 cm, which I find quite practical. If it's too high, it increases wind resistance and fuel consumption, while being too low risks scraping the undercarriage. The Song Plus's height falls within the standard range for SUVs, striking a balance between off-road capability and fuel efficiency. Having driven many cars, I've noticed that ground clearance significantly impacts overall handling—for instance, in rainy conditions, a moderately high vehicle tends to be more stable. I recommend paying extra attention to the suspension system during maintenance to prevent prolonged overloading from altering the height. This also helps reduce wear and tear on undercarriage components, extending the vehicle's lifespan.

Was this review help?
11
Share
Expand All
JadeRose
12/13/2025, 12:56:59 AM

When comparing the BYD Song Plus DM-i with other SUVs, the ground clearance is around 17 cm, similar to the Haval H6 I test drove. This height is standard for mid-range SUVs, offering good value for money and is suitable for budget-conscious owners. On highways, the higher ground clearance provides better visibility, and there are no major issues when taking corners. If you've driven lower cars, you'll notice the Song's superior comfort. Maintenance reminder: Tire wear can affect the actual height, so regular checks will help maintain optimal performance. Overall, it's more than sufficient for regular family trips.

Was this review help?
6
Share
Expand All
VonJayden
02/02/2026, 02:02:53 AM

As a family user, I appreciate the 17cm ground clearance of the BYD Song Plus DM-i because it makes driving to pick up my kids safer. During snowy or rainy days, deeper water won't enter the vehicle, reducing the risk of accidents. This height improves driving visibility, allowing me to spot obstacles ahead earlier. I usually pay attention to tire maintenance to prevent insufficient tire pressure from reducing the clearance. Choosing this height for a family SUV makes life easier and more worry-free. In short, safety comes first—that's the golden rule.

Was this review help?
5
Share
Expand All
JosiahAnn
04/27/2026, 06:50:40 PM

I have some insights on maintaining the BYD Song Plus DM-i's chassis, which has a ground clearance of about 17cm. I've measured the standard value myself, but loading or modifications may slightly alter it. To keep it driving smoothly, I inspect the suspension and shock absorbers every three months to prevent oil leaks or looseness from affecting the height. Higher ground clearance makes crossing ditches easier, but avoid arbitrarily raising it as it may compromise stability. When replacing tires, I recommend sticking to factory specifications to maintain consistent height. For long-term rural driving, this maintenance approach saves money.

Was this review help?
5
Share
Expand All
More Q&A

How Long Must a Novice Driver Wait Before Driving on the Highway?

According to legal regulations, novice drivers must wait until their driver's license has been valid for one year before they can drive on the highway. If the driver's license has been valid for less than a year, the driver must be accompanied by someone who has held a driver's license for more than three years and has experience driving on the highway. During the probationary period, the novice driver must display a probationary sign on the vehicle. Otherwise, they will face penalties. Drivers in the probationary period are not allowed to drive buses, commercial passenger vehicles, or operational vehicles such as police cars or fire trucks. According to Article 75 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' if a driver in the probationary period drives on the highway, they must be accompanied by a driver who has held a corresponding or higher-level license for more than three years. Legal basis: Article 75 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses': During the probationary period, motor vehicle drivers are not allowed to drive buses, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or vehicles transporting explosives, flammable and explosive chemicals, toxic or radioactive hazardous materials. They are also not allowed to tow trailers. When driving on the highway during the probationary period, the driver must be accompanied by someone who has held a corresponding or higher-level license for more than three years. For drivers of small automatic passenger vehicles for the disabled, they may be accompanied by someone who holds a license for small automatic passenger vehicles or above.
109
Share

How Long Does It Take to Replace a Clutch Plate?

Replacing a clutch plate involves removing the transmission and replacing components such as the pressure plate, release bearing, and clutch plate itself. This process typically takes about 2 to 3 hours. Below are some safety precautions for clutch maintenance: 1. When temporarily stopping or waiting at a red light while the engine is still running, shift the transmission into neutral instead of disengaging the power by depressing the clutch. 2. The principle for using the clutch is "quick disengagement, slow engagement." This means the pedal should be pressed down firmly and released slowly. Rapidly releasing the pedal can damage the clutch assembly's pressure springs and break the clutch plate's torsion springs, while also harming the entire drivetrain. However, minimize the time spent in half-clutch operation (as it causes significant wear on the clutch plate and accelerates wear due to rapid temperature rise, leading to a vicious cycle). 3. Normal wear occurs during clutch plate use. As the clutch plate gradually thins, the clearance between the release lever's inner end and the release bearing decreases (you may notice the clutch pedal feeling higher over time). If not adjusted promptly, the release lever's inner end may be pressed by the release bearing, causing the clutch to remain in a half-engaged state and leading to clutch plate burn-out. (It is recommended to keep the clutch pedal free travel between 20-25mm.)
116
Share

What are the differences between the 2020 and 2021 Tesla models?

Appearance remains largely unchanged with added configurations, improved performance, and extended range. Below are the key features of the 2021 Tesla models: 1. Exterior: The 2021 Tesla Model-3 maintains its overall exterior design with subtle adjustments. For instance, the window frames and door handles now feature blackened trim materials instead of the previous silver chrome strips, and it offers optional 18-inch and 20-inch wheels. 2. Interior: For the interior, the 2021 Tesla Model-3 retains its general layout but introduces refined details and functional area modifications. The silver chrome strips on the center console have been replaced with darker decorative elements, and the area below the central control screen now incorporates wireless phone charging functionality.
119
Share

What is the difference between 85w90 and 85w140 gear oil?

85w90 and 85w140 gear oils differ in viscosity: 85w140 has higher high-temperature viscosity, while 85w90 has lower high-temperature viscosity. The replacement interval for gear oil varies depending on different situations: 1. If synthetic oil is used, it does not need to be replaced within 200,000 kilometers; 2. If mineral oil is used, it should be replaced every 40,000 to 60,000 kilometers. Gear oil, also known as transmission oil, can reduce wear on gears and other moving parts, extend gear life, reduce friction, and minimize power loss. Precautions for using gear oil: 1. Add and change it promptly; 2. Replace the gear oil in a timely manner; 3. If the generator, starter carbon brushes, or rotor of the vehicle are contaminated with lubricating oil or grease, it may lead to poor performance or failure to operate.
107
Share

What does S1 mean in automatic transmission?

S1 is the sport mode. If you continue to accelerate, it will shift to S2, S3, and up to the highest gear. Normally, a car in D mode shifts at 3,000 RPM, but in S mode, it shifts at 5,000 RPM or higher. This mainly delays gear shifting to enhance the car's acceleration and achieve faster acceleration. The downside is increased fuel consumption and engine wear. Here is an introduction to the gears in an automatic transmission car: 1. P—Parking gear: Used when the car is parked and not in use. In this position, the wheels are mechanically locked to prevent rolling. 2. R—Reverse gear: Used for reversing. 3. N—Neutral gear: Used for temporary parking. Note that this gear indicates neutral. To prevent the car from rolling on a slope, always keep the brake pedal pressed. 4. D—Drive gear: Used for moving forward. 5. 2—Low gear: Used for starting on steep slopes or very inclined gradients. 6. L—Low gear: When going downhill or on long descents, placing the gear here limits the car to the lowest gear, allowing the engine to assist in braking. This prevents the driver from overusing the brakes, which could lead to overheating and potential danger.
101
Share

How to Replace the Battery in a JAC Refine S4 Key?

The first step is to remove any protective case or key ring from the car remote key if present. Flip the car remote key to its backside, where you can see the rear cover consisting of two parts. The side with the key ring is where the battery is located beneath the rear cover. Turn the key sideways and look for any gaps, which are usually found near the key ring or on the side of the key. Use a screwdriver to gently widen the gap by moving it along the edges. Then, manually pry open the rear cover in the direction of the closure to remove it.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.