How to turn off ABS?

[Lily]

ABS (Anti-lock Braking System) installed in the vehicle cannot be turned off and must be handled by maintenance personnel at a 4S shop. Generally, ordinary household cars cannot turn off ABS. ESP can be manually turned off, but ABS cannot be manually intervened because it would lose its meaning if it could be turned off at will. The function of the vehicle ABS system: When the wheel is about to reach the next lock-up point, the pressure of the brake fluid causes the airbag to act repeatedly, so it can act 60 to 120 times in one second, equivalent to continuous braking and releasing, similar to mechanical intermittent braking. Therefore, the ABS anti-lock system can prevent loss of direction control and wheel skidding during emergency braking, prevent the wheel from locking up during braking, and prevent the tire from rubbing against the ground at a single point, thereby increasing friction and achieving a braking efficiency of more than 90%.

[AshleyMarie]

I tried turning off ABS while driving on the track, and the feeling was completely different. For more precise brake control, disabling ABS can enhance the driving experience on the track, but remember this isn't something you should do daily. Many modern cars don't have a direct button; you'll need to look in the central control menu for driving mode settings, such as sport or track mode, which may include the option to turn it off. If you can't find it, you might need to use a diagnostic tool or disconnect the ABS sensor wiring, but this is troublesome and risky. After turning it off, the tires are prone to locking up during braking, especially on slippery surfaces, making it easy to lose control and skid—I've seen fellow drivers run off the track because of this. Safety first; it's only recommended to try this in closed areas and under professional guidance. Normally, it's best to keep it on for your protection.

[McAlan]

When I first started learning to drive, I asked my instructor how to turn off ABS. He laughed and told me not to mess with it. Later, I learned that the method involves checking the buttons inside the car, such as specific mode switches on some off-road vehicles. Alternatively, on older models, you can temporarily disable it by pulling the ABS pump fuse, but this will trigger a warning light. After turning it off, the brakes feel very stiff and are prone to skidding, making it unsuitable for beginners. I recommend starting with safety features first and not attempting risky maneuvers.

[DiJace]

Based on multiple car repair experiences, disabling ABS should be done cautiously. First step is to check the vehicle manual to locate the ABS fuse position in the engine compartment fuse box - simply pull it out, but remember it will reset after restart. Some vehicles can disable ABS via computer programming, but this requires professional equipment. After deactivation, the system becomes ineffective - braking may be unstable in rainy conditions and steering could be affected. It's crucial to implement backup safety measures like maintaining lower speeds. Safety comes first - restore the system promptly if issues arise.