···
Log in / Register

What is the fuel consumption of the Refine 2.4?

6Answers
Emilio
09/04/2025, 10:40:50 PM

Refine 2.4 has an actual measured fuel consumption of 10-12 liters per 100 kilometers. The following are specific details about the Refine: 1. Background: JAC Refine launched three highly impactful model combinations. These include the flagship new product of the Refine series, the Refine Xianghe, which extends into the high-end MPV segment; the Refine Colorful Journey, which brings a new level of practicality and reliability for business and official use; and the Refine Shuttle series, which promotes revolutionary upgrades in the light passenger vehicle market. 2. Performance: With body dimensions of 4695/1820/1880, the Refine makes efficient use of space to create a relatively spacious interior of 5.72 cubic meters. Compared to its direct competitor, the Dongfeng Fengxing, which has dimensions of 4655/1695/1950, the Refine has advantages in length and width, but is slightly inferior in height.

Was this review help?
104
Share
GabriellaAnn
09/16/2025, 11:21:27 PM

I've been driving the Refine 2.4 for five years now, mostly commuting in the city with fuel consumption averaging around 10 to 11 liters per 100 kilometers. On highways, it drops to about 8.5 liters. The 2.4-liter engine is quite robust, but if you step on the gas too hard during acceleration, the fuel consumption shoots up. I used to drive lighter sedans that only consumed around 7 liters, but the Refine's heavier body and passenger load make it higher. Developing good habits is crucial—like maintaining proper tire pressure and changing the oil regularly—to keep fuel consumption stable. For highway cruising, it's best to maintain a speed between 90 to 100 km/h. Aggressive acceleration or traffic jams can push consumption up to 12 liters. Driving smoothly and avoiding sudden braking saves a lot of money.

Was this review help?
2
Share
Expand All
LeKai
10/30/2025, 11:52:27 PM

I just got a JAC Refine 2.4. When chatting with friends about fuel consumption during our trip, it averages around 9 to 12 liters per 100 km. City traffic is the most annoying, with slow starts pushing consumption up to 11 liters, while on the highway it easily drops to around 8 liters. I chose this car for its spaciousness, perfect for hauling camping gear on weekends, but fuel consumption increases by a liter or two when fully loaded. A money-saving tip is to use eco mode more often, avoid blasting the AC, and regularly check the spark plugs and air filter to keep fuel consumption stable. A friend recommended a fuel-saving app to monitor my driving habits, and driving more smoothly really helps reduce consumption—pretty handy.

Was this review help?
4
Share
Expand All
VonJordan
12/13/2025, 11:01:06 PM

The Refine 2.4 has been driven for several years with an average fuel consumption of 11 liters per 100 kilometers. In urban areas, it can go up to 12 liters, while on highways, it's around 7 liters. As the car ages, maintenance becomes crucial. For instance, when my car wasn't serviced on time, fuel consumption spiked. After cleaning carbon deposits and replacing the air filter, it returned to 10 liters. Delaying the replacement of old parts increases friction, leading to higher fuel consumption during acceleration. Maintaining proper tire pressure is essential; insufficient pressure can add about 1 liter to fuel consumption. Avoid overloading when carrying cargo or traveling with family—keeping it light makes the fuel consumption more efficient. Even as the car ages, proper maintenance ensures a worry-free driving experience.

Was this review help?
2
Share
Expand All
DiCarmen
02/03/2026, 12:01:05 AM

We have a JAC Refine 2.4 for commuting and weekend outings. The empty vehicle fuel consumption is around 10 liters, and it can reach 12 liters when fully loaded on the highway. This car burns more fuel when carrying more people, but its spaciousness makes it very practical. During city commuting in traffic jams, the fuel consumption is higher, but I've learned to pre-plan routes to avoid congestion, saving about a liter of fuel. A small tip is to use cruise control on the highway for more stable driving, avoiding sudden acceleration and braking. For car maintenance, check the engine oil and coolant status monthly, and timely replacements can keep the fuel consumption within 11 liters. When taking the whole family out on weekends, filling up the tank in advance and calculating the mileage saves both hassle and money.

Was this review help?
6
Share
Expand All
StWyatt
04/28/2026, 04:37:08 PM

The Refine 2.4 is equipped with a 2.4-liter naturally aspirated engine, with a fuel consumption range typically between 9.5 to 11.5 liters per 100 kilometers. As an MPV, its body is relatively heavy, with high drag and wind resistance, leading to slower acceleration and higher fuel consumption during initial movement. Technically, minor reductions in fuel consumption can be achieved by improving the air filter or using low-viscosity engine oil, but don't expect significant changes. In daily driving, avoid coasting in neutral to maintain efficient engine operation, and keeping the cruising speed around the economical range of 95 km/h is most fuel-efficient. I often discuss fuel-saving modifications with fellow car enthusiasts, such as upgrading tires to reduce friction, but the actual effects are limited. The core remains developing smooth driving habits and regular maintenance to ensure the system is in optimal condition.

Was this review help?
3
Share
Expand All
More Q&A

How many teeth are used for the front and rear sprockets of a cruiser motorcycle?

The front sprocket of a cruiser motorcycle has 15 teeth, and the rear sprocket can have between 39 to 45 teeth. Impact of the number of teeth: If you want better low-speed performance and climbing ability, you can use a larger rear sprocket, such as 45 or 43 teeth. If you want higher speed on flat roads and lower engine RPM, you can use a smaller rear sprocket, such as 39, 41, or 42 teeth. Maintenance tips for motorcycle chains: Try to choose good road conditions when riding, and avoid muddy or sandy sections as much as possible; regularly maintain the chain, generally every 300 kilometers or so.
113
Share

What is the Safe Following Distance in Foggy Weather?

When driving in foggy weather, it is necessary to maintain a safe distance of 50-100 meters. When visibility is less than 200 meters: Turn on the fog lights, low beam lights, outline marker lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and maintain a distance of more than 100 meters from the vehicle ahead in the same lane. When visibility is less than 100 meters: Turn on the fog lights, low beam lights, outline marker lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 kilometers per hour, and maintain a distance of more than 50 meters from the vehicle ahead in the same lane. When visibility is less than 50 meters: Turn on the fog lights, low beam lights, outline marker lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 kilometers per hour, and exit the highway as soon as possible from the nearest exit.
120
Share

Can the original 92V tires be replaced with 96V tires?

Original 92V tires can be replaced with 96V tires. Because both 96V and 92V refer to the maximum speed that the tires can withstand, and under current speed limits, the maximum speed is not reached, so replacement is possible. Differences between 92V and 96V tires: The main difference between 92V and 96V tires is the load index. A 96V tire can carry a maximum load of 710kg, while a 92V tire can carry a maximum load of 630kg. Meanings of 92V and 96V tires: The markings on the sidewall of the tire include 96V and 92V, where 96 represents the load coefficient of a single tire, corresponding to an actual load capacity of 710kg. The following letter represents the maximum speed the tire can withstand, with V indicating a maximum speed of 240km/h, commonly used in sports cars.
118
Share

How long after a motorcycle leaves the factory can it no longer be registered?

New vehicles must be registered within 1 month from the date of invoice issuance and cannot be driven without a license plate. Temporary license plates can be applied for. Validity period of temporary license plates: The validity period of temporary license plates generally does not exceed thirty days. There are four types of temporary license plates: temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for testing, and temporary license plates for special-type motor vehicles. Motorcycle registration process: Bring all the necessary documents and first go to the vehicle purchase tax collection office to pay the purchase tax. You will need a copy of the first invoice, the tax payment invoice, the vehicle information form, and a copy of the owner's ID card. After completing the above steps, go to the inspection site for vehicle inspection and registration.
108
Share

Can You Turn on the Air Conditioning After Applying Car Window Film in Summer?

You can turn on the air conditioning after applying car window film in summer. Precautions after applying car window film: It is best not to wash the car within two days after applying the film to avoid causing bubbling. Avoid using the rear window defogging function for the first week, as moisture can adversely affect the defogging lines if not completely dry. After applying the film, you can use a towel, sponge, or soft cloth to wipe the film surface. For the first few days after application, try to avoid rolling the windows up and down, especially for newly filmed cars. The glass is tighter, and the heat-insulating film needs 5-7 days to firmly adhere to the window. During this period, the edges of the newly applied film can easily curl, and the film, not yet fully bonded, may shift. Functions of car window film: Its main functions are to block ultraviolet rays, reduce heat, prevent injuries from shattered glass, and reduce glare. Additionally, the one-way visibility feature of the film helps protect personal privacy. It also minimizes damage to interior items and passengers caused by UV exposure. Through physical reflection, it lowers the interior temperature, reducing the need for air conditioning, thereby decreasing fuel consumption and saving costs.
107
Share

How to Connect Bluetooth for Honda Lingpai 2016 Model?

First, turn on the car's Bluetooth. At this time, the car Bluetooth display will show the pairing request password, usually 0000. Then, enable the Bluetooth on your phone. The phone will detect the car's Bluetooth information. Click on it and enter the pairing password.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.