···
Log in / Register

What is the fuel consumption of the Haval H7?

6Answers
SanMackenzie
09/08/2025, 01:12:34 AM

Haval H7's MIIT comprehensive fuel consumption is 8-8.5L/100km, with an average fuel consumption around 9-10L. Related introduction: Displacement: There are currently 10 Haval H7 models on sale, all equipped with a 2.0T engine and a dual-clutch transmission. The engine has a maximum power of 170kW, maximum horsepower of 231PS, and maximum torque of 355N·m. Exterior: In terms of appearance, the Blue Label version features a hexagonal grille with three chrome trim strips inside. The rectangular fog light areas on both sides slightly tilt inward, with circular fog lights embedded in deep air intakes that complement the outer chrome trim. The LED daytime running lights in the headlight assembly resemble under-eye bags, creating an overall visual effect that is both stable and dynamic.

Was this review help?
113
Share
Teddy
09/19/2025, 11:49:48 PM

Just drove my brother's 2018 Haval H7 on a short road trip a couple days ago, showing around 10.5L/100km fuel consumption. This car is a real gas guzzler for city commuting - during rush hour traffic jams, it can spike above 12L. The engine really drinks fuel when there are too many traffic lights. However, it's quite fuel-efficient on highways, with cruise control maintaining around 8.5L. The 4S technician said this generation's 2.0T engine has relatively aggressive tuning, plus the heavy body weight, making its fuel consumption indeed about half a grade higher than comparable Japanese cars. If you frequently shuttle kids or run errands, you'd better budget an extra 300-500 yuan monthly for fuel. Oh, and don't keep tire pressure too low - last time when mine dropped to 2.0, fuel consumption increased by over 1L.

Was this review help?
1
Share
Expand All
BrooklynDella
11/02/2025, 11:13:06 PM

I've been driving a Haval H7 for three years with 80,000 kilometers on the odometer. According to real-world data recorded by Xiaoxiong Youhao, the fuel consumption is 11.2L/100km. It's particularly fuel-intensive when using the heater in winter, reaching up to 13L at -10°C, while using the AC in summer doesn't have as noticeable an effect. The engine delivers maximum torque at 2000 RPM, making frequent starts in traffic jams especially fuel-consuming. A fuel-saving tip is to switch to eco mode; the throttle response is slower but can reduce fuel consumption by about 0.8L. Try to choose Sinopec's 95-octane fuel whenever possible. Once when I refueled at a private gas station, under the same driving conditions, it burned an extra 1.5L. Friends who often carry heavy loads in the trunk should note that every additional 100kg increases fuel consumption by 0.7L.

Was this review help?
13
Share
Expand All
VonMatteo
12/16/2025, 11:13:09 PM

During last year's test drive of the new Haval H7, we specifically measured fuel consumption. The 110km route consisted of 30% urban expressways, 40% congested sections, and 30% highways, with the dashboard showing 9.8L/100km. We found the car achieves optimal fuel efficiency at a steady 60-80km/h, dropping to 7.9L/100km, but exceeds 9L/100km at 120km/h. The start-stop system saves 12% fuel in congested areas, though frequent restarts cause uncomfortable vibrations. The transmission shift logic underperforms, often hesitating at 2500rpm during 3rd to 4th gear shifts. Using full synthetic oil is recommended, which saves 0.6L/100km compared to mineral oil.

Was this review help?
16
Share
Expand All
LaStella
02/06/2026, 12:02:13 AM

The auto repair shop received feedback from Haval H7 owners, with fuel consumption generally ranging between 9-13L. The 2016 older models are the most fuel-intensive, especially those with severe turbo carbon buildup, which can reach 15L. After cleaning the throttle body and replacing spark plugs, it can drop by 2L. The newer models equipped with the 7DCT transmission show significant improvement, but the instantaneous fuel consumption during cold starts in winter can spike to 29L/100km, returning to normal only after driving 3km. Those frequently driving on mountainous roads should note that routes with more slopes have 22% higher fuel consumption compared to flat roads. One customer who upgraded to larger-sized rims saw an increase of 1.8L in fuel consumption.

Was this review help?
16
Share
Expand All
MacBrody
05/01/2026, 03:48:53 PM

Just purchased five Haval H7s for the company as engineering vehicles. Three-month real-world testing showed a combined fuel consumption of 10.3L, but it increased to 11.9L after loading tools and equipment. Several fuel-saving tips were discovered during maintenance: clean the air filter with compressed air monthly - a dirty filter can increase consumption by 0.4L; a clogged cabin air filter affects power and increases fuel usage; don't overfill engine oil beyond the maximum mark as excess oil increases resistance. Driving with windows closed on highways saves 8% fuel compared to open windows, while opening the sunroof actually increases drag. Avoid random use of fuel additives - low-quality ones may increase consumption. Using cruise control on long downhill sections is most fuel-efficient, potentially reducing consumption to just over 6L.

Was this review help?
20
Share
Expand All
More Q&A

What type of marking is the yellow dashed line in the center of the road?

The yellow dashed line in the center of the road belongs to the category of regulatory markings. Below are the types of road traffic markings: 1. White dashed line: When marked on road sections, it is used to separate traffic flows moving in the same direction or as a safe driving distance recognition line; when marked at intersections, it is used to guide vehicle movement. 2. White solid line: When marked on road sections, it is used to separate motor vehicles and non-motor vehicles moving in the same direction or to indicate the edge of the traffic lane; when marked at intersections, it can be used as a guide lane line or a stop line. 3. Yellow dashed line: When marked on road sections, it is used to separate opposing traffic flows; when marked on the roadside or curbs, it is used to prohibit long-term parking on the roadside.
106
Share

What Are the Functions of Car Window Tinting?

Here is a detailed introduction to the pros and cons of car window tinting: 1. Enhanced Privacy: Most car window films are one-way, which helps protect the owner's privacy. However, it's important for owners to carefully select the appropriate tinting film. 2. Shatterproof Protection: In the event of an accident, a tinted window can hold shattered glass together, preventing dangerous flying shards and thereby protecting passengers. 3. Thermal Insulation: High-quality car window films provide thermal insulation. In summer, they effectively control the rise in interior temperature, while in winter, they help retain heat inside the car, creating a comfortable driving environment. 4. Reduced Light Transmission: The light transmission rate of car window films does not exceed 90%. Particularly when applied to the front windshield, reduced light transmission can compromise driving safety.
107
Share

What does 18×8.5j mean for wheel rims?

Wheel rim 18×8.5j means the number 18 refers to the diameter of the wheel rim, measured in inches; the number 8.5 refers to the cross-section width of the wheel rim, also measured in inches. Below is relevant information about car wheel rims: 1. Classification: Wheel rims are also called wheel hubs. Depending on the characteristics and requirements of different vehicle models, the surface treatment processes for wheel rims will vary, generally divided into two types: painting and electroplating. 2. Size: Generally, in passenger cars, larger wheel rim sizes and higher tire aspect ratios can create a visually appealing tension effect and improve the stability of vehicle handling. However, this comes with the additional issue of increased fuel consumption. 3. Width: The width of the wheel rim is commonly referred to as the J value. The width of the wheel rim directly affects tire selection. For tires of the same size, different J values will result in different choices for tire aspect ratios and widths.
111
Share

What are the consequences of an expired driver's license?

The procedures for handling an expired driver's license are as follows: 1. If the expiration does not exceed one year, the license can still undergo normal annual review; 2. If the expiration exceeds one year or more, the driver must apply for a license renewal at the vehicle management office of the license issuing authority within 90 days before the expiration date. If the license has been expired for more than one year without renewal, the vehicle management office will cancel the driver's license. Required documents for renewal include: two copies of ID card, two recent 1-inch color photos without a hat, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital. The process for renewing a driver's license is: 1. Go to the vehicle management office of the issuing authority; 2. Follow the instructions of the staff, obtain and fill out the driver's license application form, and prepare the required documents. If a driver has not accumulated 12 penalty points in any scoring cycle during the 6-year validity period of the license, they will be issued a 10-year validity driver's license upon renewal.
104
Share

Is the Lifespan of a Three-Cylinder Engine the Same as a Four-Cylinder Engine?

In theory, the lifespan of a three-cylinder engine car is shorter than that of a four-cylinder engine car. Here are specific methods to determine how many cylinders a car's engine has: 1. Displacement: If the engine displacement is below 1L, it is generally a three-cylinder engine. If the engine displacement is 2.5L, it is typically a four-cylinder engine. If the engine displacement is around 3L, it is usually a six-cylinder engine. If the engine displacement is around 4L, it is generally an eight-cylinder engine. If the engine displacement is above 5L, it is typically a twelve-cylinder engine. 2. Spark Plugs: Generally, the number of spark plugs a car has indicates the number of cylinders in the engine. This method applies to gasoline engines. 3. Ignition Coils: Usually, the number of ignition coils corresponds to the number of cylinders in the engine. This method applies to diesel engines.
104
Share

How Long Can a Car Transmission Last After a Major Overhaul?

The lifespan of a car transmission after a major overhaul depends on subsequent maintenance and care. Here are specific details about car maintenance: 1. Pay Attention to the Dashboard: While driving, it's important to monitor the information on the car dashboard, especially the water temperature gauge, oil light, and charging indicator. Address any abnormalities promptly. Additionally, control the engine's RPM to avoid high-speed operation during driving. 2. Monitor Fuel Quality: When refueling, pay attention to the quality of the fuel. Poor-quality fuel can lead to excessive carbon buildup in the combustion chamber, fuel injectors, intake manifold, and valves. In severe cases, the engine may experience unstable idling or difficulty accelerating. Using high-quality fuel doesn't necessarily mean using high-octane fuel; simply follow the fuel grade recommendations in the car's maintenance manual. 3. Warm Up the Engine: In cold conditions, it's advisable to warm up the engine appropriately to ensure it operates at normal working temperature. This reduces operational resistance and abnormal wear during operation, thereby extending the engine's lifespan.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.