···
Log in / Register

What is the fuel consumption of the GM8?

6Answers
GabriellaLee
08/30/2025, 03:33:28 AM

The fuel consumption of the Trumpchi GM8 is 12.2 liters per 100 kilometers. Carbon deposit issue: Many car owners probably think of carbon deposits first when they encounter increased fuel consumption. Carbon deposits are like grease on a range hood—they are difficult to deal with. Carbon deposits can affect the compression ratio, leading to poor ignition, a leaner air-fuel mixture, and fuel adsorption, among other issues. All these problems can impact fuel consumption. Air filter: The air filter can also affect the car's fuel consumption. When the air filter has not been replaced for a long time, clogging can reduce the engine's air intake, which can also lead to increased fuel consumption.

Was this review help?
113
Share
VanNadia
09/12/2025, 12:32:13 AM

I've been driving the GAC GM8 for over two years now, mainly using it for commuting in the city, with fuel consumption generally maintained at around 11L/100km, dropping to about 8L on highways. As an MPV, its spaciousness makes it ideal for family trips, but the increased weight naturally adds to the fuel consumption burden. In congested urban traffic, fuel consumption often spikes above 12L, especially with frequent starts and stops; it's much more fuel-efficient on clear roads or during highway cruising. By controlling my driving habits, planning routes in advance, and avoiding sudden acceleration and braking, I've managed to stabilize the fuel consumption somewhat. Running the AC in summer increases fuel consumption by 1-2L, so I prefer driving in the evening to reduce electrical usage. Regularly checking and maintaining tire pressure at the standard value can save an additional half liter of fuel. Overall, this fuel consumption is reasonable for an MPV, but it requires proactive management of driving details by the owner.

Was this review help?
16
Share
Expand All
EmilyDella
10/26/2025, 01:20:50 AM

I've done some research on the GM8's engine. Its 2.0T engine has an official combined fuel consumption of about 9L/100km, but the actual driving experience varies significantly. In urban driving, due to frequent idling and acceleration, fuel consumption often ranges between 10-12L; while cruising on highways, it can be as efficient as below 8L. The transmission and chassis design also affect fuel efficiency, and proper use of the eco-mode can reduce consumption. Vehicle maintenance is crucial too, as clogged filters or carbon buildup can increase fuel usage. I replace the air filter every six months to optimize performance. Considering the GM8's weight and spaciousness, its fuel consumption isn't the lowest, but with proper daily maintenance, it can be kept within an acceptable range. Compared to vehicles in the same class, its economic efficiency is moderate, making it suitable for buyers who prioritize practicality.

Was this review help?
20
Share
Expand All
DiChloe
12/09/2025, 12:40:45 AM

As an average car owner, I use the GM8 for daily commuting and family trips, with an average fuel consumption of around 10L/100km. In city driving with frequent traffic lights, it can go up to 12L, while on highways with relaxed driving, it's around 8-9L. Fuel consumption increases noticeably when using air conditioning or carrying a full load. The methods for saving fuel are simple: drive gently and avoid sudden acceleration; plan routes to avoid peak hours; keep the car's contents lightweight. The comfort of an MPV justifies this fuel cost, and I recommend beginners use fuel consumption apps to track data and adjust their driving habits.

Was this review help?
8
Share
Expand All
OJulian
01/29/2026, 01:49:38 AM

When driving the GM8, I noticed that fuel consumption can be improved through driving habits, with a combined fuel consumption of approximately 9-11L/100km, rising to 12L in urban areas. By gently accelerating and decelerating, and minimizing the use of air conditioning for heating or cooling, fuel consumption can be reduced to below 10L. Regular maintenance of tire pressure and cleaning engine components also help. Heavy cargo or aggressive driving increases the load, so it's advisable to adjust driving modes based on road conditions.

Was this review help?
18
Share
Expand All
Alana
04/24/2026, 01:18:43 PM

Compared to the Honda Odyssey, the GAC GM8 has slightly higher fuel consumption, averaging around 10L/100km (11L in city driving and 8L on highways). Among MPVs, the GM8 offers attractive value for money, but hybrid models are more fuel-efficient. Smooth driving and light loads can optimize results during use. Personally, I believe that with proper management, its fuel consumption meets household needs.

Was this review help?
9
Share
Expand All
More Q&A

What is a Bias Ply Tire?

Here is the relevant introduction about bias ply tires: 1. Definition: A bias ply tire, also known as a conventional structure tire, refers to a pneumatic tire where the carcass plies and breaker layers have adjacent ply cords that cross each other and are arranged at an angle of less than 90 degrees to the centerline of the tread. This type of tire has good longitudinal rigidity and is suitable for medium-speed driving on ordinary roads. 2. Composition: A bias ply tire is an old-fashioned structured tire. The tire casing consists of the tread, carcass plies (tire body), breaker layers, and bead. The carcass plies serve as the skeleton of the tire casing, maintaining its shape and size. They are typically made of an even number of multiple layers of rubber-coated fabric (plies), with the ply cords arranged at approximately a 35-degree angle to the tread centerline, running from one sidewall through the tread to the other sidewall.
112
Share

Should a Leaking Car Shock Absorber Be Repaired or Replaced?

It is best to replace a leaking shock absorber. Although a leaking shock absorber still allows normal driving, the immediate effect of losing damping is a reduction in comfort. If the vehicle speed is high, even on a smooth road, it can cause significant vertical oscillations, severely reducing the vehicle's stability. In extreme cases, this can pose serious safety hazards. Below is an introduction to shock absorbers: 1. Working Principle: Shock absorbers and elastic components work together to cushion impacts and dampen vibrations. If the damping force is too strong, it can degrade the suspension's elasticity and even damage the shock absorber's connecting parts. Therefore, a balance must be struck between the elastic components and the shock absorber. In automotive suspension systems, telescopic shock absorbers are widely used, which can dampen vibrations during both compression and extension strokes—these are called double-acting shock absorbers. There are also newer types of shock absorbers, including gas-filled shock absorbers and adjustable-resistance shock absorbers. 2. Product Classification: Based on the damping material used, shock absorbers are mainly divided into hydraulic and gas-filled types, with another category being variable-damping shock absorbers.
109
Share

What Should Be Wrapped Around the Low-Pressure Pipe of a Car Air Conditioner?

It is best to wrap the low-pressure pipe of a car air conditioner with sponge. Below is an introduction to the car air conditioning system: 1. Compression Process: The compressor sucks in the low-temperature, low-pressure refrigerant gas from the outlet of the evaporator and compresses it into a high-temperature, high-pressure gas, which is then discharged from the compressor. 2. Heat Dissipation Process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser. Due to the decrease in pressure and temperature, the refrigerant gas condenses into a liquid and releases a large amount of heat. 3. Throttling Process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, causing its volume to increase and its pressure and temperature to drop sharply, exiting the expansion device in a mist form (fine liquid droplets). 4. Heat Absorption Process: The mist-like refrigerant liquid enters the evaporator. Since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas. During the evaporation process, it absorbs a large amount of heat from the surroundings, and then the low-temperature, low-pressure refrigerant vapor re-enters the compressor.
120
Share

What does the 3226+15 fault code mean?

3226+15 fault code means the vehicle is in a powered-on state. Below is a detailed introduction to automotive fault codes: 1. Meaning: Indicates the monitored fault system - P for powertrain system; B for body system; C for chassis system; U for network or data communication transmission system fault code. 2. First digit: Indicates whether it's a generic code (applicable to all vehicle manufacturers) or a manufacturer-specific code. For example: 0 refers to a generic code, 1 refers to a manufacturer-specific code. General Motors in the United States has specific numeric type codes to assist in diagnosing vehicle technical conditions. 3. Second digit: Indicates the type of affected fault system, with numbers ranging from 1-7: 1 for fuel and air metering system; 2 for fuel and air metering system (specifically referring to poor injection system circuit function); 3 for ignition system or misfire monitoring system; 4 for auxiliary emission system; 5 for speed control and idle control system; 6 for computer output circuit system; 7 for transmission.
106
Share

What to Do If You Forgot to Renew Your Expired Driver's License?

If your driver's license has expired for less than one year, you can go to the vehicle management office with your expired license, ID card, and a physical condition certificate to complete the renewal procedures. If it has expired for more than one year but less than three years, you need to take the subject one exam. After passing the exam, you can renew your license. If it has expired for more than three years, the license will be automatically revoked, and you will need to re-enroll in a driving school to obtain a new license. Here are some precautions for using a driver's license: 1. Driver's licenses have an expiration date: A driver's license is only valid for driving legally if it is within its validity period. Driving with an expired license is considered illegal. 2. Avoid accumulating 12 penalty points within 12 months: A driver's license has 12 points over a 12-month period. Be sure to avoid accumulating all 12 points within this timeframe, as you will then need to attend a training session at the local vehicle management office and pass an exam. If you fail the exam, you must retake it until you pass before you can reclaim your license.
108
Share

What is the fuel consumption of a 3.6L engine?

3.6L engine fuel consumption generally ranges between 14L-18L. Below are detailed explanations about engine displacement: 1. Concept: Displacement is an important indicator for evaluating engine performance. The volume of fluid inhaled or exhausted by the engine per stroke or cycle is called the engine's intake volume. The working volume swept by the piston moving from top dead center to bottom dead center is called cylinder displacement. If an engine has multiple cylinders, the sum of all cylinders' working volumes is called the engine displacement. It is usually expressed in liters (L) or cubic centimeters (cc). 2. Power unit: Horsepower is defined as the power exerted by a horse capable of pulling 33,000 pounds moving at 1 foot per minute, with watts (W) or kilowatts (kW) as standard units. Specifically, 1 metric horsepower = 75 kilogram-force·meters/second = 735 watts. For a 1.6L engine, depending on the brand and tuning method, a naturally aspirated engine typically ranges between 100 to 120 horsepower. With turbocharging technology, it can reach up to around 130 horsepower.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.