···
Log in / Register

What is the body length of the Bin Yue?

6Answers
VanGiselle
08/31/2025, 02:17:02 AM

The length, width, and height dimensions of the Bin Yue are 4330mm/1800mm/1609mm, which are official data. The length of the Bin Yue refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Bin Yue has a maximum power of 104kW and a maximum torque of 235 Nm. This engine delivers a maximum horsepower of 141 and reaches its maximum torque at 1600 to 4000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head. This engine is paired with a 6-speed manual transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

Was this review help?
104
Share
OHarley
09/12/2025, 10:41:33 PM

I've always enjoyed discussing car details, such as the fact that the Binyue's body length is approximately 4330mm. This size is quite standard for a compact SUV, and I think it's cleverly designed—not too short or too long, just right for city driving. Parking isn't as troublesome as with larger vehicles, and from my experience, in tight parking lots at malls or residential areas, a quick turn of the wheel is all it takes to slot right in. The turning radius is small, making it agile and responsive to handle. In terms of space layout, the rear seats comfortably accommodate three people with ample legroom, and the trunk can hold plenty of shopping bags or travel luggage. As for fuel efficiency, the shorter and lighter body helps save on gas costs. Compared to similarly sized models like the Baojun 510, the Binyue is slightly longer but makes more efficient use of interior space. Overall, it’s a size that balances practicality and convenience, perfect for daily commutes or family outings.

Was this review help?
18
Share
Expand All
DeSimon
10/26/2025, 11:28:41 PM

The body length of the BinYue is approximately 4330mm, which is a very balanced size among small SUVs. From my driving experience, the shorter body makes it much more agile to handle. In urban traffic congestion, it doesn't feel as bulky as mid-to-large-sized vehicles, making it easier to navigate through narrow alleys or take sharp turns. The interior space is also quite sufficient, with a spacious rear seat design that ensures passenger comfort. Folding down the rear seats makes it convenient for loading luggage or shopping items. The handling stability is excellent, with a steady center of gravity during turns, reducing the risk of skidding. Fuel efficiency is another advantage, as the shorter and lighter body contributes to better fuel economy. Compared to similar-class vehicles like the Haval H2, the BinYue's size is optimized more reasonably. The overall design emphasizes practicality, making it suitable for driving in various road conditions.

Was this review help?
15
Share
Expand All
DelJaxon
12/09/2025, 10:44:29 PM

I know the Binyue is about 4330mm in length. As an owner, I find this size very practical: easy to park without taking up much space, and it handles turns with agility. The rear seating area is spacious enough that friends don't feel cramped, and the trunk is sufficient for daily use. Compared to the Honda HR-V, it's shorter and easier to control.

Was this review help?
19
Share
Expand All
OBeau
01/29/2026, 11:53:54 PM

The body length of the Bin Yue is approximately 4330 mm. From a practical perspective, this size makes it excel in urban driving: easy to find parking spots, quick response when turning on narrow bends, and less prone to collisions. Stable handling reduces the likelihood of accidents, and fuel consumption is also lower due to the lightweight body. The space arrangement is reasonable, making it suitable for daily commuting with passengers or cargo.

Was this review help?
7
Share
Expand All
Emily
04/24/2026, 06:02:12 PM

The Bin Yue has a body length of approximately 4330mm, which is ideal for our family: the children have plenty of space in the back seat without feeling cramped; the trunk is convenient for loading shopping or travel items. Its compact yet comfortable design makes parking in residential areas or urban centers simple. Compared to the Volkswagen T-Roc, it is slightly shorter but utilizes space more efficiently. It's well-suited for everyday use.

Was this review help?
6
Share
Expand All
More Q&A

Is it effective to use windshield washer fluid for removing oil film?

Windshield washer fluid is ineffective for removing oil film and cannot be used to clean oil film. To thoroughly solve the problem of oil film, a professional oil film cleaner must be used. The causes of oil film formation are as follows: Impact of vehicle exhaust: Due to incomplete combustion of gasoline, various exhaust pollutants are produced. These pollutants are often trapped on urban roads, especially behind trucks, and inevitably adhere to the car's windshield, forming an oil film. Smoke and dust pollution: If the car is frequently parked near restaurant chimneys, over time, a significant amount of smoke and dust will accumulate on the windshield. If left untreated for a long time, it will form a thick layer of greasy scale.
118
Share

What is a Crankcase?

The crankcase is the lower part of the cylinder block where the crankshaft is installed, divided into the upper crankcase and the lower crankcase. The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence it is also referred to as the oil pan. Components of the Crankcase: The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence it is also referred to as the oil pan. The oil pan bears minimal stress and is typically made from stamped thin steel sheets. Its shape depends on the overall engine layout and the capacity of the engine oil. Functions of the Crankcase: The oil pan is equipped with an oil stabilizer baffle to prevent excessive oil surface fluctuations when the vehicle is jolted. Additionally, the bottom of the oil pan is fitted with a drain plug, which usually contains a permanent magnet to attract metal particles from the lubricating oil, thereby reducing engine wear. A gasket is installed between the joint surfaces of the upper and lower crankcases to prevent lubricating oil leakage.
107
Share

What are the key points for driving on curves?

Curve driving techniques are as follows: Align the vehicle before entering: Before entering an S-curve, try to align the vehicle straight. When you see the angle between the left A-pillar and the lower edge of the windshield align with the left edge of the road, it indicates the vehicle is in the middle of the S-lane. Determine the steering timing: Observe the first node of the windshield wiper. When this node reaches the right edge line, turn left one full rotation. Then, slightly adjust the steering to keep this node on the edge line. Maintain this position while driving. When the first node of the wiper reaches the left edge line, straighten the steering wheel. Drive with the steering wheel straightened: Continue driving with the steering wheel straightened. When the second node of the wiper reaches the left edge line, turn right one full rotation. Similarly, slightly adjust the steering to keep the second node on the edge line and maintain this position while driving slowly.
114
Share

What are the reasons for crossing the line when turning right during curve driving?

Curve driving right turn crossing the line may be caused by incorrect steering timing, misjudgment of vehicle trend, and other reasons. Incorrect steering timing: When turning, failing to observe the reference point and steer in time, or not grasping the right timing, can cause the car to veer too far to the right and cross the line. Misjudgment of vehicle trend: Lack of vehicle sense and incorrect judgment of the vehicle's movement trend can lead to crossing the line. Curve driving test techniques: In principle, try to take a wider path after entering the curve; when in the curve, use the steering wheel to keep the small rearview mirror on the inner side of the hood always at the edge of the outer white line (specifically, not crossing the line or staying too far from the edge line), and straighten the direction at the end of the S-curve. Avoid using the brake, especially emergency braking.
118
Share

What does the white zigzag line mean?

White zigzag lines are distance confirmation lines. There are three types of distance confirmation lines: white zigzag distance confirmation lines, white semicircular distance confirmation lines, and highway distance confirmation markings. White zigzag distance confirmation lines: The total width of white zigzag distance confirmation lines is 300 cm, with line widths of 40 cm or 45 cm. Starting from the base point at 0 meters, a line is set every 5 meters, with two lines forming a group, spaced 50 meters apart. Five groups are typically repeated, though more may be set depending on site conditions. White semicircular distance confirmation lines: White semicircular distance confirmation lines have a hemisphere radius of 30 cm and are spaced 50 meters apart, usually set continuously over a certain section of the road. Highway distance confirmation markings: These markings are used in conjunction with distance confirmation signs and are placed in sections where overtaking is common, accidents are frequent, or other needs arise. The purpose of highway distance confirmation markings is to remind drivers to maintain a safe following distance when they see these markings, thereby preventing traffic accidents.
115
Share

What Causes the Engine Light to Illuminate While Driving?

When the engine light illuminates while driving, it could be due to engine knocking, among other reasons. The causes and solutions are as follows: Detailed Causes: The vehicle's warning light typically illuminates due to issues with the fuel emission system; poor engine combustion state; engine knocking; poor fuel quality; dirty engine cylinder interiors with carbon deposits; the computer's inability to retrieve engine data; or false faults. Solutions for Engine Warning Light Illumination: Promptly inspect the condition of the car's engine; check the status of the vehicle's sensors, including the air flow sensor and spark plug components; inspect for any knocking in the engine; and examine the ignition coil for faults.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.