···
Log in / Register

Can You Still Drive When the Traction Control Light Is On?

1Answers
Cinna
08/28/2025, 02:24:38 AM

Traction control light is on generally you can still drive. Introduction to the traction control light: The traction control light is a yellow triangle with an exclamation mark in the middle. It is also known as the ground grip control system indicator. When the traction control light is on, it reminds the owner to turn off the traction control system. If this light stays on, it indicates a problem with the traction control system. The traction control system is a safety system in the car that can adopt appropriate control algorithms according to the driving conditions of the vehicle, keeping the speed of the driving wheels as stable as possible. The traction control system ensures that the car can make the most use of the engine's driving torque when driving on the road, enabling stable starting, stable acceleration, etc. Using the traction control system can not only avoid wheel slippage during acceleration but also reduce tire wear and ensure driving safety. Solution: You need to use a car computer diagnostic tool to detect the engine system, read the fault code, identify the problem, and then repair it according to the fault information.

Was this review help?
108
Share
More Q&A

What is the fuel consumption of the Chevrolet Epica?

The discontinued Chevrolet Epica was equipped with a 1.8L+5MT/6AT powertrain. Although its power performance was average, it had good fuel economy. The official combined fuel consumption range provided by the Ministry of Industry and Information Technology for the Chevrolet Epica was 7.5-8.6L per 100km, while the actual measured average fuel consumption was 9.04-10.83L per 100km. The powertrain configuration of the Epica is introduced as follows: Introduction 1: The Chevrolet Epica's powertrain is equipped with a 1.8L naturally aspirated engine, with a maximum output power of 105kw and a peak torque of 175N·m. Introduction 2: Although the power parameters are average, they meet the needs of daily travel. The transmission options include a 5-speed manual and a 6-speed automatic transmission.
103
Share

What is the fuel consumption of the Lavida Plus 1.4T model?

Volkswagen Lavida Plus 1.4T model has a combined fuel consumption of 7L-8L/100KM. The following are the details about Lavida PLUS 1.4T: 1. Body dimensions: The length of Lavida is 4670mm, width is 1806mm, height is 1474mm, and the wheelbase is 2688mm. 2. Exterior: The new Lavida has a simple and neat exterior design. The entire grille area uses a luxurious chrome package, and the lens-style headlights are cleverly integrated into the grille area, creating a strong sense of layering and high recognition for the front face. The rear of the car inherits the family-style design, with smoked taillights and a dual single-exhaust pipe design connected by chrome trim, making it very sporty.
120
Share

What does it mean when the system shows 'not attended training' when scheduling Subject 2?

Scheduling Subject 2 shows 'not attended training'. If the system displays 'not trained', it means the student's training hours have not been uploaded to the system yet. In this untrained state, the exam cannot be scheduled. Therefore, you can consult the driving school at this time to inquire about the upload status of your training hours. The reasons for the 'not attended training' message when scheduling Subject 2 are as follows: Reason 1: Failure to complete the required training hours when learning Subject 2 of the motor vehicle driver's license, resulting in inability to schedule the exam. Reason 2: Due to network delay, the training hour data is uploaded late, making it impossible to schedule. Reason 3: Due to reasons related to the driving school, scheduling is not possible.
109
Share

Where is the emergency release cable for the Lavida hatch fuel tank cap?

The emergency release cable for the Lavida hatch fuel tank cap is located in the trunk, on the side of the fuel tank cap, where a plastic cord serves as the emergency release. Relevant details about the Lavida hatch are as follows: 1. Body dimensions: The Volkswagen Lavida hatch measures 4454mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. 2. Powertrain: The Lavida hatch is equipped with a 1.6L engine coded CSR, delivering a maximum power of 81kW, paired with an upgraded DSG seven-speed dual-clutch transmission. 3. Exterior: The front fascia design of the Lavida hatch varies significantly depending on the trim level. Base models feature simpler designs for the grille, fog lights, and fog light trim. The taillights are more elongated than before, and with increased body width and reduced height, the car presents a more sophisticated appearance.
103
Share

What is the reason for the Lavida 03020 fault preventing window operation?

Lavida experiencing the 03020 fault preventing window operation may be caused by issues such as a disconnected ground wire in the combination switch, a broken main power supply, poor contact or damage to the window relay contacts, or a damaged relay coil, as well as poor contact or failure to engage in the safety switch. Relevant details about the Lavida are as follows: 1. Exterior: It adopts Volkswagen's latest family design style, with a U-shaped front grille that gives it a more imposing look compared to the previous generation. High-end models are also equipped with LED headlights. 2. Interior: The Lavida's center console features a large screen supporting in-car navigation, CarPlay, and CarLife, among other functions. It uses large areas of piano black lacquer decorative panels for an attractive appearance. High-end models also come with keyless start, adaptive cruise control, front and rear parking sensors, and a rearview camera.
102
Share

What Causes a Key to Get Half-Stuck in the Lock and Unable to Turn?

Door lock damage: If the key suddenly won't turn, it might not be aligned properly, or the lock cylinder could be damaged. Different types of damage require different solutions. If the key isn't aligned, pressing it downward may help. Solutions for a stuck key are as follows: Solution 1: If the lock hole is damaged, try lubricating it. First, clean the lock surface with a cloth, then apply a small amount of lubricating oil or soybean oil inside. If brushing is difficult, use a dropper to add a few drops. Test the key—if it turns smoothly, clean the lock afterward. Solution 2: If the key won't turn due to stiff lock pins, check if you have a pencil at home. Scrape some pencil lead into the lock hole, then insert and turn the key a few times to open the lock—this method is very convenient.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.