···
Log in / Register

What do the function buttons on the Song Plus car key mean?

6Answers
DakotaMarie
08/30/2025, 01:00:37 AM

The function buttons on the Song Plus car key are conventional functions for locking, unlocking, and opening/closing the trunk. Conventional functions: The Song Pro car key has a button with a vehicle pattern. Pressing it twice in succession will open the trunk door, and pressing it twice again will close the trunk door. This design prevents accidental opening of the trunk door, improving safety to some extent. Hidden function: The hidden function is auto window roll-up upon locking. First, with the vehicle powered on, roll all four windows up to the highest point, then hold the lock button for more than 10 seconds. This will successfully activate the auto window roll-up function when locking. When the windows are not fully raised, the owner can press the lock button on the car key after getting out of the vehicle, and the windows will automatically roll up while the car locks.

Was this review help?
110
Share
StNatalie
09/11/2025, 10:12:09 PM

I've been driving the BYD Song Plus for a while, and its key design is quite user-friendly. The main button has a lock icon—a short press locks the doors, while a long press automatically closes the windows to prevent rainwater leakage. The unlock button features an unlock icon; a single click opens only the driver's door, while a double-click unlocks the entire vehicle, enhancing security by preventing strangers from rushing in. There's also a button with a rear car pattern—holding it for 2 seconds opens the trunk, which is very convenient when parking for shopping. Another button with a horn icon triggers the lights to flash and the horn to beep with a single press, making it easy to locate the car in a parking lot. At the bottom of the key, there's a small groove where a mechanical key can be pulled out for emergency use if the battery dies, allowing access to the driver's door. I frequently use these features, especially the car-finder button in supermarket parking lots—it saves me from wandering around searching for my car. Regularly replacing the battery ensures responsiveness, so don't wait until it's dead to act.

Was this review help?
20
Share
Expand All
DelGeorge
10/25/2025, 11:00:41 PM

As a car owner, I find the buttons on the Song Plus key fob quite practical. The circular lock button: press once to lock the doors, double press to activate the anti-theft system. The unlock button opens all doors with two quick presses, saving effort. The trunk button: hold it down to directly open the hatchback, making loading luggage easy. The special 'i' letter button activates the quick-response vehicle finder function with a single press, great for locating your car at night. Best of all is the remote start button, which lets you warm up the car for a few minutes in cold weather before getting in. The mechanical key hidden on the side is used for manual unlocking when the battery runs low - a common issue. I recommend replacing the CR2032 battery every two years to maintain responsiveness. Avoid exposing the fob to water or high temperatures to prevent button failure. These small designs significantly enhance daily driving convenience.

Was this review help?
15
Share
Expand All
McEva
12/08/2025, 10:18:06 PM

The Song Plus key fob features simple and user-friendly buttons. A lock-shaped button: short press to lock the car, long press may close windows. Unlock button: one press opens driver's door, two presses unlock all doors. Trunk button: hold to open tailgate. Find-my-car button: press once for horn sound and light flash. If equipped with engine icon, press to start remote engine. Physical key included, remove for manual unlocking. Overall, these buttons are designed for convenience with quick response for each function.

Was this review help?
19
Share
Expand All
StAllison
01/28/2026, 11:29:20 PM

When using the Song Plus key, I pay special attention to the details of the function buttons. The lock button prevents accidental operation—just one press to lock securely. The unlock button requires two presses to open all doors, enhancing security. The trunk button opens with a long press. The car locator button is useful in noisy places. Another button might be for starting the engine. Having a mechanical key as a backup is important; always check if the buttons are functioning properly before heading out. Remember not to place the key near magnetic fields, as it can interfere with the signal and cause malfunctions. Regularly clean the buttons to avoid dust blockage. These small habits can extend the key's lifespan and reduce unexpected issues.

Was this review help?
4
Share
Expand All
MollyMarie
04/24/2026, 04:01:35 AM

As a frequent driver, I'm very familiar with the Song Plus key buttons. A light press on the lock button secures the car, while a firm press activates the window-closing feature - brilliant! Double-tapping the unlock button opens all doors, perfect for family outings with kids. Holding the trunk button directly opens/closes the rear, saving time when loading/unloading luggage during trips. The car locator button sounds the horn and flashes lights, especially helpful in mall parking lots. If there's an engine icon button, pressing it remotely starts the car to warm up. Don't forget the mechanical key is a lifesaver when the battery dies. Maintenance tip: Avoid dropping the key in water and replace the battery every 1-2 years to ensure reliable functionality. These small features enhance the driving experience, making daily car use more convenient.

Was this review help?
6
Share
Expand All
More Q&A

How to deal with Audi A4L transmission failure while continuing to drive?

Slowly pull over to the side of the road and wait for assistance. Do not continue driving to prevent causing more serious damage. First, pull over to the side of the road and check if the hydraulic oil level is too high. Avoid excessive operations and wait for rescue. Drive the car to a 4S shop for inspection and add transmission fluid to ensure better lubrication for the transmission gears. Pull over to the roadside, contact the 4S shop after-sales personnel, and follow their instructions before taking any action. Park the car and let it rest for a few minutes. If the situation is severe, proceed to a 4S shop for inspection and repair.
108
Share

Can the Edge Armrest Box Accommodate a Refrigerator?

The Edge armrest box can accommodate a refrigerator, but heat dissipation must be considered. Placing a car refrigerator in the armrest box allows for easy access to items. Compressor car refrigerators generate some heat during cooling, requiring sufficient space for ventilation. Typically, a 3 to 5 cm gap should be left at the rear of the armrest box for proper ventilation. The Edge is a midsize crossover SUV produced by Changan Ford Automobile Co., Ltd., with dimensions of 4878mm (length), 1925mm (width), and 1770mm (height), a wheelbase of 2850mm, and a top speed of 192 km/h.
115
Share

Can the first maintenance of a new car be done at any 4S store nationwide?

The first maintenance of a new car can be done for free at any 4S store of the same brand nationwide. The maintenance manual of the vehicle includes the addresses of 4S stores, and you can choose the nearest one. Just bring the first maintenance voucher and the vehicle maintenance manual when getting the first maintenance done. Precautions before the first maintenance: 1. The valid time for the first maintenance varies depending on the brand and model of the vehicle; 2. After purchasing a new car, it is necessary to consult the sales consultant or after-sales service consultant for the specific first maintenance time to prevent missing the free first maintenance service; 3. Imported cars do not have free first maintenance services, and the cost of the first maintenance needs to be borne by the owner.
102
Share

What are the differences between Toyota Fortuner and Toyota Runner?

Here is an introduction to the differences between Toyota Fortuner and Toyota Runner: 1. Exterior comparison: (1) The Toyota Fortuner has dimensions of 4795/1855/1835mm (L/W/H), a wheelbase of 2750mm, minimum ground clearance of 225mm, and tire specifications of 265/65R17. Its exterior continues Toyota's family design language, featuring an inverted trapezoidal front grille with three chrome-plated horizontal slats, complemented by body decals and a rugged front bumper design. (2) The Toyota Runner measures 4705/1880/1840mm (L/W/H) with the same 2750mm wheelbase, but has a slightly lower ground clearance of 193mm and uses the same 265/65R17 tires. Its bold design enhances the vehicle's presence, resembling the Sequoia with muscular body lines that evoke a charging rhinoceros. The slightly concave side panels add a dynamic touch to this aggressive SUV. 2. Interior comparison: (1) The Fortuner offers a spacious and comfortable cabin with a streamlined one-piece dashboard. Its exceptionally large interior provides ample customization space, featuring foldable second and third-row seats that can accommodate over ten people when fully folded, making it ideal for travel or business use. (2) The Runner's interior primarily uses a two-tone color scheme with light-colored accents throughout. It comes equipped with full leather-wrapped seats, a satellite navigation system, and a multifunctional central display that offers passengers diverse options while adding numerous practical features and safety enhancements.
104
Share

How to Reset the Maintenance Light on a Bora?

To reset the maintenance light on a Bora: 1. Turn off the ignition switch; 2. Press and hold the button next to the speedometer with your right hand for about 30 seconds, then turn on the ignition switch. The mileage display light will flash or show the word "service"; 3. Rotate the clock adjustment button next to the speedometer clockwise; 4. Turn off the ignition switch and restart the vehicle. The Bora is FAW-Volkswagen's first independently designed model, with body dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, a wheelbase of 2610mm, a top speed of 200km/h, and front-wheel drive.
110
Share

How to Engage Reverse Gear?

Engaging reverse gear can be done in the following ways: 1. The reverse gear is located at the position of the sixth or seventh gear, marked with a capital letter R. After depressing the clutch, simply shift into the position marked R; 2. For some vehicles, you need to press the gear lever downward before engaging reverse gear, otherwise, no matter how hard you try, you won't be able to shift into reverse; 3. Some gear levers have a ring that you can pull upward with your finger to engage reverse gear; 4. A few vehicles have a button on the gear lever that must be pressed to engage reverse gear; 5. Quickly flick the lever to the left to directly engage reverse gear; 6. For automatic transmission vehicles, simply pull the gear lever downward in the direction indicated to the R position.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.