What Causes the Whooshing Sound When Braking?

1 Answers
OCharles
07/29/25 9:41pm
The reasons for the whooshing sound when braking are: 1. Poor quality brake pad material; 2. Uneven brake disc; 3. Damaged edge of the brake disc; 4. Foreign objects in the brake disc; 5. Overly hard brake pads; 6. Dirty brake caliper; 7. Mismatched brake pads and brake disc; 8. Insufficient brake fluid. Solutions for the whooshing sound when braking include: 1. Replace the brake pads; 2. Replace the brake disc; 3. Clean the brake disc; 4. Clean the brake caliper; 5. Top up the brake fluid. Braking, also known as deceleration, refers to the action that can stop or reduce the speed of moving locomotives, vehicles, other transport tools, or machinery.
Was this review help?
20
0
Share
More Forum Discussions

Should the handbrake be released before shifting gears in the Subject 2 driving test?

No, you should shift gears first and then release the handbrake. Here are some key points to note for the Subject 2 driving test: 1. Control the starting gear correctly: The starting gear should always be in first gear whenever the vehicle moves from a stationary position. 2. Shift gears progressively: Skipping gears is strictly prohibited in the Subject 2 test. Gear changes must be done progressively, such as from first to second gear, second to third gear, and so on. 3. Shift gears smoothly: Always depress the clutch fully when shifting gears, and only shift when the vehicle reaches the appropriate speed range. 4. Maintain proper driving speed: Use first gear or reverse gear at idle speed throughout the test, and control the driving path carefully. The vehicle's path mainly depends on the speed of steering wheel rotation and the driving speed.
5
0
Share

How to Set the Car Doors to Not Open from Inside?

Car child lock, also known as door lock child safety, is located on the rear door locks of the vehicle. To activate it, open the rear door and locate a small lever (safety mechanism) below the door lock. Push the lever towards the end with the child icon, then close the door.
13
4
Share

How to Legally Ride a Modified Motorcycle on the Road?

Allowed modifications: replacing high-performance spark plugs; installing certified xenon lights. Prohibited modifications: altering engine displacement; power enhancement. Allowed modifications: applying decals on the body; installing decorative lights. Prohibited modifications: changing body color; adding strobe lights; enlarging exhaust pipes.
14
3
Share

What is the process for the Subject 3 driving test?

According to the safety officer's instructions, approach the vehicle and walk clockwise around it starting from the driver's side door. After confirming safety, open the door. Complete tasks such as simulated lighting checks, starting the vehicle, turning right at intersections, making U-turns, proceeding straight through intersections, and turning left at intersections. Upon hearing the voice prompt 'Test passed, please exit the vehicle' or 'Test failed, please exit the vehicle', open the door and exit to conclude the test.
17
5
Share

How to Make Up for Invalid Hours in Subject 2?

According to the "Teaching and Examination Syllabus for Motor Vehicle Driver Training," one instructional hour equals 60 minutes, so 16 hours are required for Subject 2. The "Teaching and Examination Syllabus for Motor Vehicle Driver Training" clearly states that no more than 4 instructional hours are allowed per day, and any excess will be recorded as invalid hours.
6
3
Share

What is the Difference Between Fuel Oil and Gasoline?

Here are the specific differences between fuel oil and gasoline: 1. Nature: Fuel oil is mainly made from cracked residue oil and straight-run residue oil of petroleum. Gasoline is produced by refining different gasoline components obtained from petroleum refining, such as straight-run gasoline components, catalytic cracked gasoline components, and catalytic reformed gasoline components, and then blending them with high-octane components. 2. Characteristics: Fuel oil is characterized by high viscosity and contains a large amount of non-hydrocarbon compounds, colloids, and asphaltenes. Gasoline is characterized by volatility, anti-knock properties, stability, and corrosiveness. 3. Application: Fuel oil is mainly used for fuel power generation, heating units, ignition of coal-fired units, as well as for combustion support and stable combustion. Gasoline products can be divided into three categories according to their use: aviation gasoline, automotive gasoline, and solvent gasoline.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.