What is the method to reset the maintenance light on Geely Emgrand GS?

[LondynAnn]

Method to reset the maintenance light on Geely Emgrand GS: There are two buttons on the dashboard, the left button is for menu switching, and the right button is for mileage reset. With the power on, hold down the left button with your left hand and press the right button once with your right hand. On the setup menu page, select the first option (the left button is for selection and the right button is for confirmation), then choose vehicle settings. Press the left button to clear and reset the maintenance light. The dimensions of the Geely Emgrand GS are 4440mm in length, 1833mm in width, and 1560mm in height, with a wheelbase of 2700mm. The 2020 Geely New Emgrand GS offers six models, including the 1.5TD 7DCT golden powertrain and the 1.4T CVT efficient powertrain, all of which meet the China VI-b emission standards.

[Harris]

I remember when the maintenance light on my Geely Emgrand GS came on, it was really stressful, but it's actually a simple fix: First, sit in the car without starting the engine, just turn the key to the second position so all the dashboard lights come on. Then, look for the TRIP button on the right side of the steering wheel, press and hold it for about five to ten seconds, and the wrench light will flash a few times before turning off—that means the reset was successful! If the light doesn’t respond, check whether you pressed the correct button or if the car battery is low. I recommend resetting it yourself right after each maintenance to avoid missing service intervals, which helps extend your car’s lifespan and saves money. I’ve made it a habit after every service—don’t worry, it’s not complicated, just pressing a button. You’ll get the hang of it after one try.

[DeMiranda]

Understanding this maintenance light reset is quite interesting. I've studied its principle—it's essentially a reminder system triggered by mileage or time. The reset method involves turning the car key to the ON position without starting the engine, then pressing and holding the adjustment button next to the dashboard for about seven or eight seconds until the light naturally goes off. If unsuccessful, try restarting the vehicle or checking for loose wiring. Don't ignore this light as it promptly signals oil changes and maintenance to prevent mechanical failures. During my own attempts, I found that pressing the button multiple times makes it more stable and avoids accidental triggers. Resetting after maintenance ensures accurate reminders for the next service—a practical tip worth noting.

[DelDante]

Resetting the maintenance light during DIY car repairs is a small task. First, ensure the car is turned off and the key is in the ACC position with the dashboard lit. Locate the TRIP button, usually on the side of the steering wheel, and hold it down for more than five seconds. Observe the indicator light flashing and then turning off to complete the process. If the light remains on, the button might be faulty or may require adjustment with after-sales software. The operation is simple, but wear gloves to avoid electric shock. Remember to reset it immediately after regular maintenance to avoid forgetting and drive with peace of mind. My DIY experience suggests that doing it early saves time and effort with better results.

[DeJaxson]

I think there's no need to panic when the maintenance light comes on, as the reset operation is super simple. Just sit in the car, turn the key to the ON position without starting the engine, then press and hold the TRIP button on the dashboard for about 5-10 seconds until the light automatically turns off. If it doesn't work on your first attempt, don't worry - try a couple more times or consult the manual for professional advice. After resetting the light, timely car maintenance is crucial to prevent wear and enhance performance. Especially in rainy or snowy weather, a well-maintained vehicle is safer and deserves special attention.

[DeDaisy]

Young car owners' quick tips for car maintenance: Resetting the maintenance light on the Geely Emgrand GS is super fast. Turn the key to the ON position until all dashboard lights illuminate, then hold the TRIP button for about five seconds until the wrench light flashes and goes off. If there's no response, make sure you're pressing the correct button and not accidentally activating other functions. After resetting, take the opportunity to check tire pressure and fluid levels to ensure your car is in good condition for smoother driving. I often use this chance to do a quick maintenance check—saving money and looking cool!