···
Log in / Register

What Causes the Hissing Sound When a Car Goes Over Speed Bumps?

6Answers
VonHarrison
09/02/2025, 10:17:49 PM

It is normal for a car to make a hissing sound when going over speed bumps. Here are some precautions to take when driving over speed bumps: 1. Slow down: Reducing speed in advance can minimize the risk of scraping the undercarriage and protect the suspension. 2. Avoid crossing at an angle: This increases the stress on the body and wheel suspension, and frequent use of this method can lead to body distortion. 3. Avoid passing with only one side of the wheels: Prolonged use of this method can cause suspension misalignment or deformation, as well as uneven tire wear. 4. Pass with both wheels simultaneously: Ensure the tires pass vertically to maintain balanced suspension stress. It is recommended to keep the speed below 20km/h when passing over speed bumps.

Was this review help?
112
Share
KinsleyDella
09/15/2025, 12:06:20 AM

I always hear a hissing sound like air being released when going over speed bumps, which is quite annoying. This is usually a sign of shock absorber issues. Inside the shock absorber, there's oil and gas. If the seals are damaged or leaking, the gas will escape during compression, causing this noise. My old car had the same problem, and upon inspection, we found the shock absorbers were aged and cracked. Ignoring it can make the ride feel bumpier, handling unstable, and increase the risk of skidding, especially when turning in rainy conditions. I recommend getting it checked by a professional shop ASAP. Replacing the shock absorbers isn't expensive, and once fixed, the noise disappears immediately, ensuring safer driving. This issue is common in older models or cars with poor maintenance. Regular part replacements can prevent it.

Was this review help?
11
Share
Expand All
DelAnastasia
10/29/2025, 12:45:36 AM

Previously, my modified pickup truck made this kind of air-release sound when going over speed bumps, which was later confirmed to be due to a leak in the air suspension system. That system uses airbags instead of springs to adjust height when encountering bumps. If the hoses are loose or the connections are aged, they can leak air under pressure, producing a hissing sound. This issue is commonly found in SUVs or luxury models. I recommend listening for any abnormal noises from the air pump when starting the vehicle and checking the manual to see if it's equipped with air suspension. Don't delay—once the air leaks, the suspension can collapse, affecting both ground clearance and stability. Friends who have done modifications also found that improper installation during aftermarket upgrades can easily cause this problem, but timely repairs should fix it.

Was this review help?
10
Share
Expand All
VanKarter
12/11/2025, 11:57:23 PM

The hissing sound you hear might indicate aging suspension components, such as severely worn rubber bushings or ball joints. When going over speed bumps, gaps between parts widen or friction expels air, creating that 'pfft' sound. Having driven beaters for decades, I've seen this countless times - the simple solution is to lift the car and visually inspect for cracks. After replacing the worn parts, the noise disappears and the car rides smoother over bumps. Rubber components degrade faster under high temperatures, and frequent speed bump encounters in city driving accelerate their deterioration.

Was this review help?
14
Share
Expand All
Hector
02/01/2026, 01:08:25 AM

Safe driving is crucial. Don't ignore the sound of air release when going over speed bumps—it could indicate issues with the entire suspension system, such as aging shock absorbers, or it might be the brake booster pump leaking air under pressure. I learned this the hard way when I initially thought it was just a minor shock absorber problem, but a check revealed a loose hose was the culprit. My advice: don't waste time guessing—head to a reputable repair shop for a thorough diagnosis as soon as possible. During regular maintenance, ask the mechanic to pay extra attention to suspension and brake-related components to prevent problems before they arise.

Was this review help?
13
Share
Expand All
StAlana
04/26/2026, 06:18:43 PM

Don't ignore the faint exhaust sound - suspension failure when going over speed bumps reduces vehicle stability and compromises safety. The noise comes from compression exhaust, indicating poor component performance. Prolonged neglect may lead to loss of control, especially on slippery roads. I recommend regular inspections for oil leaks or abnormal wear on shock absorbers. Early repairs prevent greater losses. Safe driving relies on maintaining these small details to preserve overall coordination and ensure peace of mind behind the wheel.

Was this review help?
3
Share
Expand All
More Q&A

What is the fuel consumption per 100 kilometers for a 3.0t engine?

The fuel consumption for a 3.0t engine is 10.2L/100km, with actual measurements ranging between 15-16L/100km. Below is relevant information: 1. There are many main influencing factors, and different tuning of the engine and transmission will result in corresponding differences in fuel consumption; 2. Secondly, factors such as vehicle weight, load, tire pressure, road conditions, and driving habits will all have certain impacts on the vehicle. Additionally, manual and automatic transmissions differ, leading to corresponding variations in fuel consumption. Extended information: Formula for calculating hourly fuel consumption: Fuel consumption per 100km / 100 * limit * 0.8 (the limit speed is the maximum safe speed). For example: If a car consumes A liters of fuel to travel N kilometers, then the fuel consumption per 100 kilometers = A ÷ N × 100. Substituting specific numbers, if a car consumes 4 liters of fuel to travel 50 kilometers, then the car's fuel consumption per 100 kilometers = 4 liters ÷ 50 kilometers × 100 = 8 liters/100 kilometers. The fuel consumption per 100 kilometers is 8 liters, commonly referred to as '8 liters of fuel'.
109
Share

How to Handle Car Violation Fines on 12123

The method to handle car violation fines on 12123 is as follows: 1. First, install the Traffic Management 12123 APP on your mobile phone. Open the 12123 App, and the page will display the number of violations and the deduction of driving points, etc.; 2. Click on the details to see the specific information of the vehicle violation, such as the location, time, photos, fine, and points deducted. Select the violation that needs to be handled, then click on the next step for processing and payment; 3. After clicking on 'Handle Violation and Pay', read and agree to the business rules for processing, then select the payment platform, send the mobile verification code, and click 'Confirm Payment' after confirming it is correct; 4. Then you will enter the mobile payment page. After verifying the mobile phone number again, select the bank, fill in the bank card number, and click 'Next' to pay the violation fine according to the prompts; 5. Finally, after completing the payment step by step according to the prompts and returning to the homepage, you can see that the number of unprocessed violations is 0, which means the vehicle's violations have been successfully handled.
116
Share

What are the + and - under the steering wheel of an Audi A6?

The meaning of the + and - under the steering wheel of an Audi A6: If there is one on each side, they are paddle shifters for gear shifting. If they are on the right side of the steering wheel, they control the volume. The Audi A6 is a luxury car model produced by Audi, available in sedan and wagon variants. It incorporates Audi's high-tech proprietary technologies, enriching the car's luxurious configurations and showcasing the Audi A6's exceptional sports performance. Below are specific details about the Audi A6: 1. Body dimensions: Length, width, and height are 5038mm, 1886mm, and 1475mm, respectively, with a wheelbase of 3024mm. 2. Powertrain: Equipped with a 3.0T turbocharged engine paired with a 48V hybrid system, delivering a maximum power of 340 horsepower and a maximum torque of 500 Nm, achieving a 0-100 km/h acceleration in 5 seconds. The high-power 2.0T quattro version comes with a 12V mild hybrid system, offering a maximum power of 224 horsepower and a maximum torque of 350 Nm, with a 0-100 km/h acceleration time of 7.5 seconds.
118
Share

What is the reason why the right rearview mirror of an Audi cannot open?

The right rearview mirror of an Audi cannot open because the folding motor of the vehicle's rearview mirror has malfunctioned, which causes the rearview mirror to fail to open. At this time, you should not forcibly manually adjust the rearview mirror, as it may cause gear damage. You need to go to a repair shop for disassembly and maintenance, identify the specific fault, and repair it before normal use can be resumed. Additional information: 1. Functions supported by the Audi A6L rearview mirror: It supports electric adjustment, electric folding, memory function, heating function, automatic downward tilt when reversing, automatic folding when locking the car, and automatic anti-glare for night use. These functions provide convenience for daily driving. 2. Notes on using the rearview mirror: In winter, all functions of the exterior rearview mirror should be turned off except for the heating function, especially in northeastern regions. After snow melts, cold air can freeze the rearview mirror. Using the electric functions of the rearview mirror at this time may cause damage to the rearview mirror.
111
Share

What is the compression ratio of the Changan Oshan X7 engine?

The compression ratio of gasoline engines in sedans is 8-11. Specific details are as follows: 1. Compression ratio: An important parameter for measuring the performance of a car engine is the compression ratio, which refers to the ratio of the total cylinder volume to the combustion chamber volume. It indicates the degree to which the gas in the cylinder is compressed when the piston moves from the bottom dead center to the top dead center. 2. Different engine compression ratios: Gasoline engines are spark-ignition type with a low compression ratio; diesel engines are compression-ignition type with a high compression ratio. The compression ratio of gasoline engines in sedans is 8-11, while that of diesel engines is 18-23. 3. Relationship between compression ratio and engine performance: Generally speaking, the higher the compression ratio of the engine, the greater the power of the car, the more complete the combustion, and the less pollution. Compression ratio: It refers to the degree to which the engine's mixed gas is compressed, expressed as the ratio of the total cylinder volume before compression to the cylinder volume after compression (i.e., the combustion chamber volume). The compression ratio has a significant relationship with engine performance. Typically, a low compression ratio refers to a ratio below 10, while a high compression ratio is above 10. Relatively speaking, the higher the compression ratio, the greater the engine's power.
113
Share

Where is the key sensing area of the Great Wall Pao?

At the position of the ignition switch. Specific introduction is as follows: 1. One-key start function: High-end cars exclusively use the one-key start function, achieving keyless entry. The one-key start function eliminates the need for a key to open the door, truly experiencing the unique technology designed for drivers as an intelligent car one-key start tool. Originally, reliability is an important part of intelligent small cars, which is to achieve the same button reliability of turning on the power without stepping on the brake pedal, and it can also absolutely stop the engine. 2. Precautions for using car smart keys: The battery life of a smart car key is about 1 year. Due to the different frequency of use of the car key, the battery consumption varies; using the car key at different distances will consume different amounts of power. Replacing the battery of the smart car key should be done with great caution. Once a mistake occurs, the circuit board in the key will be burned out. Before replacement, the car owner should first carefully study the battery replacement diagram. When disassembling the key, pay attention to the original placement of each component and try to choose the original battery. During installation, carefully identify the positive and negative poles of the battery and do not place them incorrectly. At the same time, pay attention to the sealing ring at the bottom of the key to avoid damage during replacement, otherwise the circuit board will be burned out.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.