What are the voice commands for the lighting test in Subject 3?

[KingstonAnn]

Here are the voice commands: 1. Please turn on the headlights—Turn on the headlights. 2. Driving at night under poor lighting conditions without streetlights—Turn on the high beams. 3. Randomly select 2 or 3 from the following: (1) Driving closely behind another vehicle at night—Turn on the low beams. (2) Meeting another motor vehicle at night—Turn on the low beams. (3) Meeting a non-motor vehicle on a narrow road or bridge at night—Turn on the low beams. (4) Please switch the headlights to high beams—Turn on the high beams. (5) Passing a slope or arched bridge at night—Alternate between high and low beams and stop at low beams. (6) Overtaking the vehicle ahead at night—Alternate between high and low beams and stop at low beams. (7) Passing a sharp slope at night—Alternate between high and low beams and stop at low beams. (8) Passing a sharp curve, arched bridge, or crosswalk at night—Alternate between high and low beams and stop at low beams. (9) Passing a sharp curve or arched bridge at night—Alternate between high and low beams and stop at low beams. (10) Passing an intersection without traffic signals at night—Alternate between high and low beams and stop at low beams.

[Diaz]

I recently passed the Subject 3 driving test, and the voice commands for the lighting section made me quite nervous. The main one was 'Please turn on the headlights' when starting, followed by frequent instructions like 'Please use high beams' to simulate a vehicle ahead during night test mode, immediately followed by 'Please switch back to low beams' for oncoming traffic. During practice, I repeatedly simulated these commands using an app, and had to memorize scenarios like 'Please turn on fog lights in foggy weather' to avoid mistakes and deductions. Quick reactions during the test are crucial, as errors affect the pass rate. I recommend beginners record these voice commands and practice at home. This design isn't just for the test—proper use of lights in real driving prevents accidents and reduces complaints about dazzling high beams.

[VonBrayden]

The lighting voice commands during the Subject 3 driving test are key exam points. I remember instructions like 'turn on low beam before starting', 'use turn signals when changing lanes', and 'use high beam for night overtaking' followed by returning to low beam upon signal. Looking back after years of driving, this practice is truly practical—for example, automatically dimming lights during oncoming traffic avoids safety hazards. Test takers must familiarize themselves with the sequence and avoid distractions during voice prompts, as examiners watch closely. Lighting mistakes incur heavy penalties, so using simulators or consulting experienced drivers for scenario practice is recommended. Developing good habits contributes to long-term safe driving.

[OscarMarie]

The lighting commands for Subject 3 are simple but require quick reactions: the most common one is 'turn on the headlights' to start, and during the night test, 'switch to high beam' and 'immediately switch back to low beam'. As a driving learner, I know these instructions simulate real road conditions like meeting another car, requiring quick hand movements to operate the light switch without hesitation. Making a mistake once during the test might lead to failure, so it's important to practice often with simulated recordings. The voice commands cover details like turning on fog lights in rainy or foggy weather, with the core goal of developing safety instincts—don't wait until an accident happens to regret. Practice more and don’t fear the monotony; your results will be stable.

[LeZoey]

The lighting voice commands in Subject 3 focus on cultivating habits, such as 'Please turn on the low beam' when starting, and night test instructions like 'Simulate high beam illumination' followed by 'Switch to low beam for oncoming traffic'. I believe this is not just about exam techniques but also crucial for driving safety; for example, high beam misuse can easily cause accidents, and voice reminders reflect real-world needs. During practice, I record the commands and listen repeatedly to familiarize myself with the rhythm and avoid nervous mistakes. The lighting section is prone to point deductions in exams, so don't overlook the small details. Extending to daily driving, using lights correctly reduces conflicts and gains examiner approval.

[VonAubrey]

Lighting voice commands are a crucial part of the Subject 3 test, designed to simulate real-world scenarios: 'Turn on headlights' when starting, 'Switch to high beam' during night driving to simulate overtaking, followed immediately by 'Switch to low beam' to avoid oncoming traffic. I often study these systems—why emphasize quick response? To train brain-hand-eye coordination and prevent hazards like blinding others with high beams. The test includes commands like 'Park and turn off lights.' During practice, don't just memorize the commands; understanding their purpose is more important. Technology assists, but mastering the basics is key. Passing the test proves its worth.