···
Log in / Register

What are the regulations for motor vehicle annual inspections?

6Answers
DeCooper
09/03/2025, 11:56:45 PM

Private cars only require on-site inspections twice within 10 years, specifically in the 6th and 8th years. From 10 to 15 years, they need to be inspected annually, and after 15 years, inspections are required every six months. The frequency of motor vehicle annual inspections is as follows: Motor Vehicle Annual Inspection: Vehicle annual inspection refers to the annual examination of vehicles that have obtained official license plates and registration certificates, conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to check the main technical conditions of the vehicle, encourage enhanced maintenance, ensure the vehicle remains in good condition, and guarantee driving safety. Frequency of Motor Vehicle Annual Inspections: For passenger vehicles used for commercial purposes, inspections are required once a year within the first 5 years. After 5 years, inspections are required every 6 months. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years. After 10 years, inspections are required every 6 months. Motor vehicle annual inspections are divided into initial inspections and regular inspections.

Was this review help?
117
Share
McAdriel
09/16/2025, 01:05:00 AM

I remember when I went for the annual inspection last time, the first six years after buying a new car were relatively hassle-free. You just needed to apply for the exemption inspection label online or through the traffic management app every two years, without having to visit the inspection station. After the car is over six years old, it gets a bit more troublesome—you have to go in person every year to check the lights, brakes, exhaust emissions, and so on. Last time, I wasted half a day because the emissions didn’t meet the standards. For older cars over ten years, the frequency is even higher, and extra attention should be paid to safety component checks. The key is to bring all the required documents: the vehicle license, compulsory insurance policy, and to settle any traffic violations in advance—otherwise, you’ll just waste time standing in line. I recommend checking the tires and lights before the annual inspection and booking online services to save time. Safety comes first—don’t take any risks.

Was this review help?
14
Share
Expand All
AbigailAnn
10/30/2025, 01:37:22 AM

As a new car owner, I've researched the annual inspection rules: newly purchased vehicles are exempt from on-site inspections for the first six years, but must apply for an exemption certificate every two years by submitting documents through the 12123 APP. From six to ten years of age, inspections become stricter, requiring annual visits to testing stations for checks on engine emissions, braking systems, and exterior conditions. Last time, I carelessly failed the emissions test and had to go back to the shop for adjustments before passing. So before the inspection, I recommend testing your lights and brakes yourself. Prepare copies of your ID and insurance policy, and make an online appointment in advance for convenience. Don't miss the deadline to avoid fines and travel disruptions.

Was this review help?
9
Share
Expand All
VonWillow
12/13/2025, 12:45:12 AM

Don't delay the annual vehicle inspection. For new cars, it's simple in the first few years: just apply for the inspection exemption mark every two years. After six years, an annual physical inspection is required, checking emissions, lights, and safety devices. I always check tire pressure and lights beforehand, and bring the vehicle license and insurance policy. Safety comes first—overdue inspections may result in fines or penalty points, causing unnecessary trouble.

Was this review help?
19
Share
Expand All
DelKimberly
02/02/2026, 01:52:12 AM

I believe annual vehicle inspections are more than just regulations—they're crucial for environmental protection and road safety. New cars enjoy a hassle-free biennial exemption, but as vehicles age, annual checks for emissions, brakes, etc., become mandatory. Like me, I proactively clean the exhaust system every year to prevent exceeding standards. Inspection stations conduct thorough tests—neglecting overdue inspections carries significant risks: beyond fines and penalty points, it increases emission pollution, harming public environments. Keeping track of schedules and timely handling ensures safer travels for everyone.

Was this review help?
15
Share
Expand All
VonNolan
04/27/2026, 06:40:47 PM

Regularly maintaining my car, I've noticed that paying attention to annual inspection details is crucial: For new cars within the first six years, simply applying for the exemption inspection mark every two years saves time; after that, annual testing at inspection stations for brakes, lights, emissions, etc., is required—last time, a small bulb issue caused a hassle with re-inspection. Bringing necessary documents is essential, and now mobile appointments can streamline the process. Neglecting the annual inspection can lead to fines and affect insurance claims, so it's important to regularly confirm the vehicle's safety status.

Was this review help?
9
Share
Expand All
More Q&A

What phenomenon is likely to occur if the rear wheels lock up during vehicle braking?

If the rear wheels lock up during vehicle braking, it is prone to cause the vehicle to fishtail. When the rear wheels lock up before the front wheels, it leads to fishtailing because the locked wheels reduce braking force, decreasing the friction between the rear wheels and the ground. As a result, a torque is generated relative to a certain point, causing the vehicle to fishtail. Below are solutions to prevent fishtailing: 1. While driving, if skidding occurs during braking, immediately stop braking, reduce fuel supply, and turn the steering wheel toward the side of the skid. When adjusting the brakes, ensure that the front and rear wheels lock up simultaneously or the front wheels lock up slightly earlier, and there should be no noticeable deviation during braking. 2. For vehicles equipped with load-sensing proportioning valves or anti-lock braking systems (ABS), owners should regularly check their functionality. For vehicles without ABS, control the slip ratio within the range of 10%-30% during braking to achieve the maximum adhesion coefficient, keeping the wheels in a semi-locked and semi-rolling state. This maximizes the use of adhesion for ideal braking performance and effectively prevents skidding and fishtailing.
119
Share

What causes the front left and right power windows of the Envision to be unresponsive?

Reasons for Envision power window failure: 1. Excessive resistance from window seals or damaged window regulator: Window failure may be caused by excessive resistance from the window seals or damage to the power window regulator. Disconnect the negative battery terminal for three minutes, then reconnect it, and the issue should generally be resolved. 2. Front window control unit freezing and stopping operation: A power reset is required. Weak battery causing window failure: Window failure may occur due to a weak battery or when the battery reaches its lifespan limit. Replacing the vehicle battery can solve the problem. Maintenance tips for car windows are as follows: 1. Regularly clean the window seals. 2. Periodically lubricate the window gears. 3. Apply rubber conditioner.
106
Share

What is the emblem on the Audi fender?

Vehicle body panels often have stamped numbers. If it's a stamped number, it's usually the part number - each automotive component has a unique part number. If the number consists of 17 digits, then it's the vehicle identification number (VIN). Additional information: Audi: Audi is a renowned automobile developer and manufacturer, with its logo featuring four interlinked rings. Currently a subsidiary of Volkswagen Group, its headquarters is located in Ingolstadt, Germany. Main models include Audi A1, A3, A4, A5, A6, A7, A8, Q1, Q2, Q3, Q5, Q7, Q8, TT, R8, as well as the S and RS performance series.
104
Share

What is the overview of the Odyssey chassis?

The chassis of the Odyssey is introduced as follows: 1. Front Suspension: The new Odyssey adopts a MacPherson strut independent suspension in the front, which is the most widely used type in front-wheel-drive vehicles. 2. Rear Suspension: The rear suspension has been changed from the previous generation's independent suspension to a torsion beam non-independent suspension to increase interior space. 3. Materials: In the Odyssey's chassis components, the front suspension lower control arm is made of aluminum, and one end of the lower control arm uses a hydraulic bushing, while the rest of the suspension components are made of steel. 4. Others: The overall chassis protection is minimal, with a protective plate under the engine compartment. The arrangement of the spare tire, fuel tank, and exhaust pipe is also quite unique, clearly showing the design efforts to maximize interior space in the Odyssey.
113
Share

How much electricity does an electric vehicle consume when charging for one hour?

An electric vehicle consumes approximately 45 kWh of electricity when charging for one hour. The amount of electricity required to charge an electric vehicle for one hour depends on the following two factors: 1. The total battery capacity of the electric vehicle. Each electric vehicle has a different total battery capacity—some have larger capacities, while others have smaller ones. Therefore, the amount of electricity consumed in one hour of charging depends on the size of the electric vehicle's battery capacity. 2. The power of the corresponding charging station. The power of the charging station also varies, depending on the BMS (Battery Management System) of the electric vehicle, which automatically matches the vehicle's battery capacity with the charging station's power to determine the charging power.
113
Share

What is the fuel tank capacity of the 2017 Magotan in liters?

2017 Magotan has a fuel tank capacity of 66L. This data is official. Owners who purchased the 2016 Teana can also check this information on their vehicle's configuration sheet. The 2017 Magotan is equipped with three different engine displacements. Models with the 1.4T turbocharged engine require 95-octane fuel, have an NEDC combined fuel consumption of 5.5L/100km, and can travel up to 1200km on a full tank. Models with the 1.8T turbocharged engine also require 95-octane fuel, have an NEDC combined fuel consumption of 6.4L/100km, and can travel up to 1031km on a full tank. Models with the 2.0T turbocharged engine require 95-octane fuel, have an NEDC combined fuel consumption of 6.7L/100km, and can travel up to 985km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel might exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity. Additionally, the following factors can affect a car's fuel consumption: Vehicle weight: There is a direct correlation between weight and fuel consumption. A 10% reduction in weight can lead to a corresponding percentage drop in fuel consumption. Vehicle aerodynamics: A lower drag coefficient results in noticeably reduced fuel consumption. Conversely, a higher drag coefficient increases fuel consumption proportionally. Tire pressure: Low tire pressure increases friction and adhesion, leading to higher fuel consumption. Driving habits: Aggressive acceleration and frequent braking can significantly increase fuel consumption. Wind direction: Driving with a tailwind reduces fuel consumption, while driving against a headwind increases engine workload and fuel consumption. Road conditions: Driving on flat surfaces consumes less fuel compared to uneven or steep roads. Use of additional electronic devices: Operating extra devices like the air conditioning during driving increases fuel consumption.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.