···
Log in / Register

How to Handle the Biennial Vehicle Inspection?

6Answers
Lopes
08/28/2025, 10:44:56 PM

To handle the biennial vehicle inspection, you need to bring the vehicle registration certificate, the owner's ID card, and a copy of the valid compulsory traffic insurance policy. With these three documents, you can go to the vehicle management office or a service station to complete the process. Relevant details are as follows: 1. Note: The biennial vehicle inspection does not take much time; the process usually takes about two minutes. Owners need not worry about spending a lot of time on this, but they must ensure they complete the biennial inspection on time. Failure to do so within the specified period may lead to various complications. 2. No Exemption for 7-Seaters: 7-seater vehicles are not eligible for the exemption policy and must undergo on-site testing. Many MPVs, SUVs, and vans are 7-seaters, and with the increasing number of families opting for such vehicles, it's important to note this requirement during the annual inspection.

Was this review help?
103
Share
RileyAnn
09/10/2025, 03:28:30 AM

Just helped my neighbor with the annual vehicle inspection a couple of days ago, and the process is actually much simpler than you'd think. As long as the car is between 2 to 6 years old, simply open the Traffic Management 12123 APP, click 'Exemption Inspection Vehicle Application for Inspection Label' on the homepage, fill in the license plate and engine number, and you're good to go. Remember to pay off any traffic fines in advance, or the system will get stuck. All you need are photos of the vehicle registration certificate and compulsory insurance policy. Upload them, and it's done in three minutes. The electronic inspection label is automatically sent to your phone—no need to stick anything on the windshield. If stopped by traffic police, just show them your phone. It saves money and time, and you don't have to queue at the DMV. The mobile operation is especially user-friendly for young people.

Was this review help?
13
Share
Expand All
SanMia
10/24/2025, 04:20:27 AM

It is recommended to handle the annual inspection one month in advance, don't wait until the last few days. You need to bring three items: the original vehicle license, a copy of the valid compulsory traffic insurance, and it's best to also bring a photocopy of your ID card as a backup. First, check for any traffic violations on the APP, and if there are any fines, go to the bank to pay them off first. If you are having someone else handle it for you, remember to write a letter of authorization and have the agent bring their own ID card. When you arrive at the vehicle management office, first get a form and fill it out, then go to the window to submit the materials. After the staff verifies the vehicle in the system, the new electronic inspection label will be issued immediately. Weekends are especially crowded, so if you're in a hurry, it's best to go on a weekday at 9 a.m. By the way, vehicles with modified rims or lights need to be restored to their original condition first.

Was this review help?
4
Share
Expand All
AdalynnRose
12/07/2025, 03:42:17 AM

Different situations require different approaches: New cars within six years can apply online, while vehicles older than six years must undergo on-site inspection. First, schedule an appointment at the inspection station and bring the vehicle license, compulsory insurance policy, and the owner's ID card. The inspection fee is around 200 yuan and takes about 40 minutes. Pay attention to whether the lights are working, the brakes are responsive, and the exhaust emissions meet standards. Modified cars are most likely to fail the emissions test, especially older ones. Last time, I saw someone with a modified exhaust pipe being asked to remove it and retest, wasting extra money. Remember to settle all traffic violations before going, or it will be a wasted trip.

Was this review help?
8
Share
Expand All
VonConnor
01/27/2026, 10:05:19 PM

Tips I've summarized from years of vehicle inspections: First, call the insurance company to get an electronic copy of the compulsory traffic insurance policy. Clear the engine fault light two weeks before the inspection. Check the lights in advance, as non-functional brake lights are a common reason for re-inspection. Bring 300 in cash as backup, as some inspection stations only accept cash. Hiring an agent costs an extra 150, but it saves hassle. The new policy is favorable now, allowing nationwide inspections without needing authorization, so out-of-town vehicles can also be inspected locally. After the inspection, remember to check for the electronic label on the 12123 app, as paper stickers no longer need to be affixed to the windshield.

Was this review help?
19
Share
Expand All
JakeRose
04/23/2026, 02:57:05 AM

Recent changes in annual inspection policies require attention: Since last year, electronic inspection stickers have been implemented, eliminating the need for paper stickers on windshields. Vehicles over ten years old no longer require two inspections per year, now reduced to one. New energy vehicles undergo essentially the same inspection items as fuel vehicles, with battery inspections notably excluded. An easily overlooked detail: the vehicle's appearance must match the photo on the registration certificate; large-area wraps or color changes require filing. Last year, a relative's pickup truck was required to rectify modifications due to an added rear cover. It's advised that added foot pedals not exceed 5 cm, and while wheel rim styles can be changed, sizes should remain unaltered.

Was this review help?
8
Share
Expand All
More Q&A

Where are the accelerator, brake, and clutch pedals located in a car?

In a car, the clutch pedal is on the left, the brake pedal is in the middle, and the accelerator pedal is on the right. Below are some precautions regarding the operation of the accelerator and clutch pedals. 1. Starting: When starting a manual transmission car, it is essential to use the clutch properly. The key points for operating the clutch pedal during starting are: quick initial lift, slow adjustment when reaching the semi-engagement point, and coordinated movement. Initially, lift the clutch pedal quickly, then slow down the lifting speed when the semi-engagement state is reached. While lifting the clutch pedal, gradually press the accelerator pedal according to the engine resistance to ensure a smooth start. Mastering this technique helps avoid stalling the engine while driving. 2. Gear shifting while driving: When shifting gears during driving, the clutch pedal must be pressed. The clutch pedal should be pressed and released quickly without lingering in the semi-engagement state, as this can accelerate clutch wear. Pay attention to coordinating the accelerator during gear shifts. Inaccurate coordination between the accelerator and clutch may result in jerky gear shifts, causing wear to the car's transmission and reducing ride comfort. Some experienced drivers use the double-clutching method during gear shifts, but this is not recommended for novice drivers. 3. Pressing the clutch when stopping: The clutch should be pressed when stopping the car in daily driving. Not using the clutch when stopping can easily lead to stalling, cause impact on the transmission, and in severe cases, affect the engine's lifespan, increasing the owner's maintenance costs. Proper use of the clutch ensures smooth and stable stopping.
108
Share

What is the function of an automotive oil filter?

Automotive oil filter is used to: filter the engine oil, improving its cleanliness and lubricity, thereby reducing engine wear and ensuring optimal performance. The automotive oil filter, also known as the oil filter, operates similarly to the circulatory system of the heart—the oil in the oil pump continuously circulates, during which many impurities are generated, requiring the oil filter to remove them. Recommended replacement interval for automotive oil filters: replace every 5,000 to 10,000 kilometers driven. It is advisable to replace the oil filter every time the engine oil is changed because contaminants in the old oil filter can reduce the viscosity and cleanliness of the new oil, affect oil circulation speed, and potentially damage the engine.
117
Share

How to Adjust the Date on a Dash Cam?

To adjust the date on a dash cam: Click the menu on the dash cam, find the settings option, select the date and time settings, and adjust the time to the current accurate time. Reasons for incorrect dates on dash cams: 1. Dead battery: The dash cam does not retain time memory when powered off; replacing the battery will solve the issue. 2. Loop recording time setting: If set too short or too long, it may cause time desynchronization; setting an appropriate loop recording time will resolve this. The main functions of a dash cam are to record road conditions, prevent fraud, serve as evidence for liability determination in case of accidents, and capture scenic views during the journey.
112
Share

What is the fault when the excavator safety lock is opened but there is no action?

Excavator safety lock opened but no action fault diagnosis. Check hydraulic oil level: Blocked hydraulic circuit suction filter, oil circuit suction vacuum (including excessively low hydraulic tank oil level) can cause insufficient oil suction or even failure to draw oil in the hydraulic pump. These will directly lead to insufficient oil pressure in the hydraulic circuit, resulting in no movement of the excavator. This type of fault can be diagnosed by checking the hydraulic tank liquid level and the contamination degree of the hydraulic oil. Check if the hydraulic pump has malfunction: Hydraulic excavators generally use 2 or more main pumps to supply pressurized oil to the system.
112
Share

Does the Classic Sylphy have ESP?

Classic Sylphy does not have ESP. ESP stands for Electronic Stability Program, which helps maintain optimal vehicle stability under various conditions, particularly effective in cases of oversteer or understeer. More information about ESP is as follows: 1. The ESP system is essentially a traction control system. Compared to other traction control systems, ESP not only controls the drive wheels but also the non-drive wheels. 2. For example, in rear-wheel-drive vehicles that often experience oversteer situations where the rear wheels lose control and cause the car to fishtail, ESP will brake the outer front wheel to stabilize the vehicle. In cases of understeer, to correct the tracking direction, ESP will brake the inner rear wheel to adjust the driving direction.
117
Share

How Many Horsepower is 124kw?

124kw is equivalent to 168 horsepower. Power is a crucial performance parameter of an engine, measuring the amount of work done by the engine per unit of time. The higher the power, the more work the engine can perform within a given time frame. Greater power also translates to better acceleration performance in vehicles. Another important performance parameter of a car's engine is torque, which measures the output moment per work cycle. Automotive power refers to the work done by the vehicle per unit of time, indicating the work performed by an object within that period. Higher power results in greater torque, enhancing the vehicle's pulling force. Maximum power is commonly used to describe a car's dynamic performance.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.