What are the reasons why the Geely Boyue trunk does not respond to the remote control?

How to Deal with a Partially Flooded Car?

First, report to the insurance company to inquire about the claims process. The insurance company should provide compensation. After reporting to the insurance company, promptly tow the vehicle to a repair facility and immediately disconnect the power supply. Conduct a comprehensive disassembly and inspection.

104

Share

How to turn off the rear wiper of the Tiguan L?

Pull the control lever towards the driver to activate the front windshield washer function. The rear wiper control button is located on the right side. Rotate it to the corresponding position to turn off the wiper. Push the wiper control lever towards the front of the vehicle to spray water and clean the rear windshield. HI is the high-speed setting, LO is the low-speed setting. Switch to the OFF position to turn off the wiper. 1X makes the wiper swing once, and the lever will automatically rebound.

114

Share

How to Activate Sport Mode in BMW 5 Series?

Locate the button on the left side of the gear lever to switch driving modes. ECOPRO is the energy-saving mode. Click the COMFORT mode for normal engine power output. Click the SPORT button to switch to sport mode, which increases engine power. Click the ADAPTIVE mode to enable adaptive mode, where the vehicle's computer automatically adjusts engine power.

119

Share

How to Adjust Idle Speed for China IV EFI Motorcycles?

During adjustment, first remove the side cover screw on one side, take off the side cover, and start the motorcycle to warm it up to normal operating temperature. Slowly adjust the idle speed screw: turn clockwise when the idle speed is low, and counterclockwise when the idle speed is high. Stop immediately when reaching the standard value. Once the RPM drops to the standard value and runs smoothly, the idle speed adjustment is complete.

103

Share

What are the tire specifications for the Lamando?

The Lamando's tire size is 225/45R18. The first number, 225, indicates the tire width is 225 mm. The 45 represents the aspect ratio, meaning the tire's sidewall height is 45% of its width. The 18 signifies the rim diameter is 18 inches, and the letter "R" in the middle stands for radial tire. The Lamando is equipped with a set of 18-inch Phantom Blade alloy wheels in a black and silver color scheme. The tires used are Dunlop SP-SPORT-MAXX-050, and the spare tire is a non-full-size specification. If you wish to replace the tires yourself, follow these steps: Retrieve the spare tire and jack. Position the jack under the vehicle frame near the tire you're replacing, ensuring it contacts the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure it is perpendicular to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not fully remove the nuts at this stage—just loosen them enough to reduce resistance. Keeping the tire on the ground while loosening the nuts ensures that the nuts turn rather than the tire. Continue turning the nuts counterclockwise until they are loose. Repeat this step for all lug nuts, then remove them completely. Place the new tire onto the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. The tire replacement is now complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F."

102

Share

What is the solution for the wiper noise issue in Mercedes-Benz E-Class?

The wiper linkage mechanism may experience aging. Therefore, it is necessary to inspect the wiper arm or the wiper linkage bushing. The wiper blade itself can cause noise issues. It is recommended to directly replace with new wiper blades, which should ideally be changed every one to two years. Foreign objects trapped between the wiper blade and the windshield can also lead to noise. Owners should check and clean any debris under the wiper or on the wiper blade.

111

Share