How to Activate Cruise Control on the Wildlander?

[IsabellaFitz]

Press the ACC switch to activate the Adaptive Cruise Control system. When the speed is between 30~150km/h, roll the adjustment button towards the SET/- direction. After activating ACC cruise, you can increase the cruise speed via RES/+ or decrease it via SET/-. If the ACC is currently in a temporarily deactivated state, you can reactivate it according to the previously set speed via RES/+.

[MacAmelia]

When driving my Wildlander on the highway, I always love using the cruise control. It's quite simple to activate: first, get the speed above 40km/h, which is most suitable on highways; then press the CRUISE button on the right side of the steering wheel, and a small icon will light up on the dashboard indicating the system is ready. Once the speed stabilizes at your desired level, say 80km/h, press the SET button to lock it in. After that, if you want to adjust the speed higher or lower, just push the SET+ or SET- button—it's effortless. If there's a car ahead or you want to cancel, a light tap on the brake or pressing the CANCEL button does the trick—safe and convenient. When I first learned to use it, I was a bit flustered, but after a few tries, it became second nature. It saves a lot of effort on long drives and even improves fuel efficiency. However, beginners should be cautious: avoid using it on city roads, and turn it off during rain or heavy traffic for safety. Regularly check the steering wheel buttons to ensure good contact and prevent rust from affecting responsiveness. Overall, this feature is very practical, and I use it every time I head out.

[PaulLee]

I frequently use the Wilanda's cruise control on long trips. Having driven for over a decade, I find this system thoughtfully designed. After starting the car and accelerating to a suitable speed (around 40km/h), there's a small CRUISE button on the left side of the steering wheel - press it to activate the control function. Then hit SET to lock the current speed. For fine-tuning, use SET+ or SET- to adjust by 1-2 km/h increments, perfect for finding the most fuel-efficient rhythm. The easiest way to cancel is by braking or quickly pressing the CANCEL button. I particularly love using it on open highways to reduce foot fatigue, and the dashboard display ensures I never forget whether it's activated. When combined with the auto-hold function, it offers even greater safety - just avoid activating it on curves or busy road sections. Regular maintenance includes keeping the buttons clean to prevent dust from affecting sensitivity.

[MacHarmony]

Wilanda owners share the method to activate cruise control: First, accelerate while driving to at least 40 km/h; locate the dedicated button area in the center of the steering wheel and press the button labeled CRUISE to activate the system; then press SET to lock the speed value; fine-tune by pushing SET+ up or pulling SET- down. This setup is logically clear, with conveniently placed buttons that don’t distract from driving. To cancel, either lightly press the brake pedal or tap CANCEL. I noticed the indicator light on the dashboard confirms the status, preventing misoperation. Related features might upgrade to ACC adaptive cruise control, but the basic version suffices for daily use. Keeping the steering wheel buttons free from wear is key.

[VonElla]

I always worry about safety when driving the Wildlander, but the cruise control is quite reliable on highways. After starting, when the speed reaches above 40km/h, press the CRUISE button on the right side of the steering wheel to activate it, then use the SET button to set the target speed. Adjust the speed by sliding the SET+/SET- buttons. To turn it off, simply step on the brake or press CANCEL, and manual control is instantly restored. I usually only enable it on straight and wide roads, and disable it during rainy days or at night to prevent accidents. Additionally, regular maintenance of the button system is essential to prevent malfunctions. The operation is simple and easy to master, saving effort and worry. However, my son panicked the first time he used it due to lack of familiarity, so I recommend practicing on low-speed roads first.

[Rex]

At first, I was a bit confused about activating the cruise control on the Wildlander as a newbie, but later I figured out the steps: first, accelerate the car to an appropriate speed, at least 40 km/h for highway safety; then find and press the small button labeled CRUISE on the steering wheel to activate the system; press the SET button to stabilize the speed; adjust it up or down to a comfortable range with a simple slide, making it effortless. To cancel, just step on the brake or press the cancel button—simple and straightforward. I also enjoy relaxing with some music after setting it up, making long drives less tiring on the feet; just remember not to use this feature in crowded urban areas, and regularly wipe the steering wheel buttons to prevent accidental touches.