···
Log in / Register

What are the precautions and details for the Subject 2 driving test?

6Answers
Jameson
07/29/2025, 04:25:17 PM

Subject 2 driving test requires paying attention to frequent observation of rearview mirrors. Introduction to Subject 2: Subject 2, also known as the small road test, includes five test items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. Precautions for Subject 2: When reversing into a garage, pay attention to observing the rearview mirrors to accurately gauge the distance between the rear wheels and the two lines of the garage in the mirrors. For parallel parking, drive the car to a position parallel with the garage, then reverse into the garage to the right rear without stopping during the maneuver, as stopping will result in test failure.

Was this review help?
113
Share
DiFaith
08/14/2025, 01:07:25 PM

As someone who has passed the driving test (Subject 2), I was very nervous back then. Make sure to practice driving frequently beforehand, at least three times a week, and master parallel parking and reversing into the garage. On the exam day, arrive early to familiarize yourself with the route and stay calm. Clutch control is crucial—don't start too fast or too slow to avoid stalling. When reversing, check the reference points in the mirrors and stop once aligned, avoiding crossing the lines. Follow the path smoothly during curve driving, and don't turn the steering wheel too sharply. Slow down before right-angle turns to ensure you don't hit the corner. During the test, remember to use turn signals, fasten your seatbelt, and adjust the seat and mirrors for comfort. Take deep breaths and relax, treating it like a practice session. If you make a mistake, don't get discouraged—just try again next time. The key is more practice and trusting your instincts.

Was this review help?
7
Share
Expand All
DiLevi
10/16/2025, 12:16:50 AM

Having taught many students for the Subject 2 driving test, I always emphasize the details. Controlling the speed is the most important—press the clutch gently to prevent the car from shaking or stalling. During the test, parallel parking must be precise; after parking, align and straighten the wheels to avoid point deductions for exceeding the time limit. When reversing into the parking space, check the mirrors and blind spots carefully—take it slow to avoid crossing the lines. Smoothly navigate the curves by following the lines with the steering wheel without hesitation. Pay attention to minor rules, such as checking lights and mirrors before starting, and don’t forget the turn signals. Mentally, stay relaxed and avoid tension. With enough practice on basic skills, you can pass in one go. The test is essentially about assessing fundamental abilities—don’t overcomplicate it.

Was this review help?
16
Share
Expand All
DelAdriel
11/29/2025, 12:04:25 AM

Accompanying my child for the Subject 2 driving test, I've gained quite some insights. While my child was practicing, I reminded them to eat well, rest properly before the test, and not to get too nervous to use the restroom. The key lies in the details: when reversing into the parking space, find the right reference point and operate slowly to avoid crossing the line. For parallel parking, manage the time well and don't take too long. During curve driving, maintain a steady speed and don't panic when steering. Adjust the seat and mirrors first for a more comfortable drive. Stay focused during the test and ignore others' actions. Don't release the clutch too hastily. Safety comes first, and treat any failure as a learning experience.

Was this review help?
1
Share
Expand All
HazelLee
01/19/2026, 01:26:17 AM

Thinking back to the driving test for Subject 2, it was quite interesting. When I first started practicing, I kept stalling the car, but later I mastered the trick. Key points for the test: release the clutch slowly when starting, use mirrors as reference points when reversing, and align properly when parking without crossing the line. Don't rush during parallel parking—straighten the steering wheel after entering. Follow the lines naturally during curve driving and slow down on bends. Remember to use turn signals; wrong usage leads to point deductions. Stay relaxed and treat it like practice. Small details matter—crossing lines is the most common reason for failure. After passing, it felt simple—just practice more.

Was this review help?
7
Share
Expand All
McSkylar
01/19/2026, 01:28:10 AM

The detailed steps for Subject 2 test. Adjust the seat and mirrors before starting, and control the clutch steadily to prevent stalling. When reversing into the garage, observe the reference points and mirrors, align properly and stop without crossing the line. For parallel parking, stay close to the side, reverse and turn the wheel to the correct position before straightening, and control the time without exceeding. Drive smoothly along the curve route with smooth steering. Slow down in advance for the right-angle turn and steer sharply. Throughout the test, remember to use turn signals and fasten the seatbelt to avoid violations. Mentally, take deep breaths to stay calm, focus on the operation without panic.

Was this review help?
17
Share
Expand All
More Q&A

What Causes the Jerking Sensation When Shifting Gears in Park for an Automatic Transmission?

Possible causes for the jerking sensation when shifting gears in park for an automatic transmission include: transmission clutch pressure leakage; obstructed transmission fluid passages; and transmission fluid not filled to the standard level. 1. Reasons for the jerking sensation when shifting gears in park for an automatic transmission: Internal clutch pressure leakage in the transmission. Check if the clutch is damaged. The transmission fluid passages are also obstructed. Wear on the valve body, long-term lack of transmission fluid changes leading to degradation and reduced lubrication effectiveness, a dirty transmission filter reducing filtration efficiency, allowing wear particles to enter the valve body. 2. Additional tips: Techniques to resolve gear shifting jerking: The key during gentle acceleration is to press the accelerator slowly, lift the foot lightly, and then press again. Automatic transmissions generally complete gear shifts at low RPMs, effectively addressing the issue of jerking during gear shifts.
104
Share

What are the reasons for the rapid consumption of Audi coolant?

Audi coolant is consumed quickly due to the following reasons: 1. There may be a coolant leak; 2. Poor circulation leading to rapid consumption; 3. Coolant entering the cylinders and being burned or entering the oil pan. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase of 3024mm, fuel tank capacity of 73l, and curb weight of 1800kg. The 2020 Audi A6 features a five-link independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
110
Share

How to Determine if the Electronic Throttle Pedal is Damaged?

To determine if the electronic throttle pedal is damaged, check whether the car produces abnormal noises when the pedal is pressed or if the pedal fails to return to its original position. A damaged electronic throttle pedal can render the car unusable. The reasons for the EPC light illuminating in a car are: 1. Faults in the intake system, such as leaks or blockages; 2. Excessive dirt accumulation on the throttle; 3. The fuel grade not meeting the required standards; 4. Abnormal cylinder pressure; 5. System false alarms or occasional faults. The functions of the car engine EPC are: 1. Precise control of the throttle opening to improve fuel economy; 2. Rapid system response for satisfactory handling performance; 3. Integration of idle speed control, cruise control, and vehicle stability control to simplify the control system structure.
120
Share

What are the differences between the Mercedes-Benz 2.5t and 3.0t?

Mercedes-Benz 2.5t and 3.0t differences are: 1. Different body dimensions: The Mercedes-Benz 2.5t has a body length, width, and height of 4813mm, 1951mm, and 1761mm respectively; the 3.0t has dimensions of 4941mm, 2018mm, and 1782mm. 2. Different maximum horsepower: The Mercedes-Benz GLE 2.5t has a maximum horsepower of 333ps, while the 3.0t has a maximum horsepower of 367ps. Both the Mercedes-Benz 2.5t and 3.0t are equipped with a 9-speed automatic transmission; the front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension.
103
Share

What car is referred to as 'Broken Shoe'?

'Broken Shoe' refers to Porsche. This nickname comes from a homophonic play on words. Here is some related information about Porsche: 1. The Prancing Black Horse: The prancing black horse symbolizes Porsche's astonishing power. 2. The 'PORSCHE' Lettering: The word 'PORSCHE' appears at the top of the logo, indicating that the core emblem is owned by Porsche Design. 3. The 'Stuttgart' in the Center: The word 'Stuttgart' in the center represents the location of Porsche's headquarters, which is in the city of Stuttgart. 4. The Surrounding Emblem: The surrounding emblem is derived from the coat of arms of the state of Baden-Württemberg and is framed with the colors of the German flag—black, red, and yellow—together forming an inspiring shield.
101
Share

How to use the automatic start-stop function in the Sylphy?

The method to use the automatic start-stop function in the Sylphy is: press the automatic start-stop switch located on the center console. The automatic start-stop switch uses a mechanical button, and its main purpose is to save energy and reduce exhaust pollution. Turning off the automatic start-stop allows the driver to have better control of the vehicle. Taking the 2021 Nissan Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, minimum ground clearance 166mm, and curb weight 1188kg. The 2021 Nissan Sylphy is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122ps, maximum torque of 155nm, maximum power of 90kw, and is paired with a 5-speed manual transmission.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.