···
Log in / Register

What are the power specifications of the Buick LaCrosse?

6Answers
LeMalia
07/29/2025, 03:54:14 PM

The power specifications of the Buick LaCrosse are as follows: The entire lineup is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 241 hp, a maximum power output of 177 kW, and a maximum torque of 350 Nm. The maximum torque is achieved between 1,500 and 4,000 rpm. The engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block, paired with a 9-speed automatic transmission. The Buick LaCrosse measures 5,026 mm in length, 1,866 mm in width, and 1,462 mm in height, with a wheelbase of 2,905 mm, providing spacious and luxurious seating for a premium mid-to-large-sized sedan. The interior boasts 29 practical storage compartments, making it convenient to store everyday items such as devices and handbags.

Was this review help?
114
Share
DiTyler
08/14/2025, 11:38:56 AM

I've been driving the Buick LaCrosse with the 2.0T engine version for a while now. It delivers a maximum horsepower of 241 hp and a peak torque of 350 N·m, providing satisfyingly strong power. Paired with a 9-speed automatic transmission, the acceleration is smooth, and overtaking on highways is effortless. For daily urban commuting, the fuel consumption is kept at 8-9L/100km, which is quite fuel-efficient. As a family sedan, these parameters are designed to be practical, with no lag at startup and stable, reliable performance at high speeds. I also noticed that the engine is intelligently variable, automatically adjusting output based on road conditions, which saves energy while enhancing driving pleasure. Overall, the powertrain configuration is well-balanced, making driving easy and confident, and I haven't encountered any major issues.

Was this review help?
14
Share
Expand All
DeSophie
10/15/2025, 04:02:39 AM

The power specifications of the Buick LaCrosse strike me as quite professional. The standard version features a 2.0-liter turbocharged engine with an output of approximately 241 horsepower and 350 Nm of torque, paired with a 9AT transmission. As an automotive enthusiast, I appreciate its lightweight and efficient engine design, complemented by direct fuel injection technology, which ensures quick acceleration response and smooth shifts without any jerking. Performance data indicates a 0-100 km/h acceleration time of around 7 seconds, with minimal noise during highway cruising. Fuel efficiency is also commendable, with a combined cycle fuel consumption of 7-8L. Compared to vehicles in the same class, its power delivery is more linear and smoother. Engine maintenance is convenient, requiring only routine checks of the lubrication system during regular servicing.

Was this review help?
15
Share
Expand All
McAvery
11/28/2025, 09:05:53 PM

I drive a Buick LaCrosse to work every day, equipped with a 1.5T engine producing 169 horsepower and 250 Nm of torque. The power delivery is smooth and gentle, with no abruptness during city starts, and the throttle response is sharp at highway speeds. The 9-speed automatic transmission shifts seamlessly without any jerks. Combined with these specifications, the fuel consumption is as low as 7L/100km, making it economical and eco-friendly. The powertrain is designed to be simple and reliable, and I haven’t encountered any issues after a year of driving. It offers a comfortable and safe daily commute, making it perfect for practical people like me.

Was this review help?
8
Share
Expand All
GiannaDella
01/18/2026, 10:29:39 PM

As a family car, the Buick LaCrosse offers solid power specifications. The standard 2.0T engine delivers 241 horsepower and 350 Nm of torque. It provides ample power for highway overtaking, while the 9-speed transmission ensures smooth and stable driving without noticeable vibration. For families, the power output is smooth and safe, with good fuel consumption control at around 8L/100km and reasonable maintenance costs. The engine is designed for durability, showing no issues within the three-year warranty period. From a practical standpoint, these parameters, matched with a comfortable chassis, ensure peace of mind for both elderly passengers and children.

Was this review help?
14
Share
Expand All
Kenneth
04/14/2026, 11:48:46 PM

With ample driving experience, I find the Buick LaCrosse's powertrain reliable, offering a choice between 1.5T or 2.0T engines, with horsepower ranging from 169 to 241 and torque from 250 to 350 Nm. The 9AT transmission is key, ensuring smooth output and fuel efficiency, with urban combined fuel consumption around 7.5L. The powertrain maintenance is straightforward, requiring only regular oil changes and line checks. Its high reliability means smooth operation even after years of use, unlike some cars with inflated specs. The balanced parameter design optimizes performance and efficiency, resulting in low long-term driving costs, making it highly recommendable.

Was this review help?
14
Share
Expand All
More Q&A

What is the purpose of an ECU?

ECU (Electronic-Control-Unit) is an electronic control unit, also known as "vehicle computer" or "on-board computer". In terms of its function, it is a specialized microcomputer controller for automobiles. Below is relevant information about ECUs: 1. The main component of an ECU is a microcomputer, with the CPU being its core element. The ECU converts input signals into digital form, processes them by comparing with stored reference data, calculates output values, and then amplifies the output signals to control various regulating servo components such as relays and switches. 2. Essentially, an ECU is an "Electronic-Control-Unit" composed of three parts: input circuit, microcomputer, and output circuit. The input circuit receives signals from sensors and other devices, performs signal filtering and amplification, and then converts them into input levels of specific voltages.
106
Share

How to Read Tire Markings?

Common methods include observing the tire brand, tire specifications, load index, and speed rating. Below is a detailed introduction to car tire markings: Importance: Tires are one of the most critical components of a vehicle, affecting driving safety, comfort, fuel efficiency, and more. Understanding the parameters represented by each marking on a tire can help prevent accidents caused by tire issues. Three T Marks: The Three T marks refer to Treadwear, Traction, and Temperature, which are located on the sidewall of the tire. These indicate wear resistance, traction performance, and temperature rating, respectively. The Three T marks are commonly used tire markings.
106
Share

What does automatic transmission 3D mean?

Automatic transmission 3D gear refers to the normal driving gear, which is the most commonly used gear. Precautions for use are as follows: 1. Automatic transmission vehicles can only be started in P or N gear. To shift out of P gear, you must step on the brake. You can first step on the brake to shift the gear to N, then start the engine, and push the gear to D to move the car forward. 2. Do not shift into N gear while driving to coast. If the car is shifted into N gear to coast, the oil pump will not be able to supply oil normally, leading to insufficient lubrication, and the temperature of the internal components of the transmission will rise, causing serious damage to the transmission. 3. After parking the car, you must shift into P gear after turning off the engine before you can remove the key. The correct parking steps for an automatic transmission are: step on the brake - shift to N gear - pull the handbrake - turn off the engine - shift to P gear, but many people directly push the gear to P. 4. While moving, do not push the gear into P gear. This is a very dangerous action that can cause serious traffic accidents.
115
Share

How to Adjust the Time and Date on a Ford Focus?

The method to adjust the time and date on the Ford Focus dashboard mainly involves the following steps: 1. With the vehicle powered on, press and hold the protruding button in the middle of the dashboard. 2. This will enter the time adjustment mode. 3. Then, move the button up and down to adjust the time. This car has advantages in the following aspects: 1. Exterior design. The classic Ford Focus retains the design style of the 2007 model, with redesigned headlights that have been smoked for a stronger design appeal. The new 16-inch wheels are visually more striking, further enhancing the sporty feel. 2. Interior design. The classic Ford Focus features dual-color seats, and the steering wheel and center console are adorned with chrome accents, making it highly popular among young people. 3. Performance. It is equipped with a 1.8-liter four-cylinder naturally aspirated engine, delivering a maximum horsepower of 124 HP, a maximum power of 91 kW, and a maximum torque of 161 N·m.
107
Share

What does the ECU in a car refer to?

Commonly known as the vehicle computer or onboard computer, it is one of the core electronic components in modern automobiles. Common causes of ECU damage are as follows: 1. During welding repairs on the vehicle frame, the ECU wire connections were not disconnected. This is because welding repairs on the frame can generate extremely high induced electromotive force due to current changes, which can harm the ECU through the wiring. 2. When the battery is low, using a silicon-controlled rectifier (SCR) charger can produce high-order harmonics that damage the ECU. 3. The charger voltage is too high, the polarity is reversed, or the ignition switch is turned on or even the generator is started while charging. 4. Maintenance personnel disassemble the ECU without caution, touch the electronic control unit interface with their hands, or use a soldering iron without grounding function to solder the CMOS chip of the ECU, which can cause the CMOS chip to be damaged by static electricity. 5. During engine operation, if the positive and negative terminals of the battery are suddenly disconnected, the circuit will generate a very high induced electromotive force, which may cause the internal electronic components of the ECU to be damaged.
113
Share

How to Deal with Complete Failure of Lavida's Power Windows?

The reasons for the complete failure of Lavida's power windows include the system temporarily disabling the lifting function, damage to the window regulator, malfunction of the window control button, etc. Possible causes include a disconnected ground wire of the combination switch, a broken main power supply, poor contact of the window relay contacts, damaged resistors or coils, poor contact or disconnection of the safety switch, etc. Temporary System Disabling of the Function: After raising or lowering the window glass several times in succession, the window lifting function may be temporarily disabled for a few seconds to prevent overheating and damage to the window lift motor. You can wait for the function to recover before operating it again. Window Regulator Damage: Try using the car key to control the window. If the car key also fails to control the window, it indicates that the window regulator is damaged and requires repair. Malfunction of the Window Control Button: If the window control button is unresponsive or there is an issue with the wiring, check the wiring of the driver's side window switch. If the wiring is intact, the switch needs to be replaced.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.