···
Log in / Register

What are the penalty points for reverse parking?

6Answers
StMartin
07/23/2025, 04:59:51 PM

Penalty points for reverse parking include not following the prescribed route or sequence, vehicle body crossing the line, failing to complete the parking, and stopping midway. Below is a detailed introduction about the car driving license test: 1. Overview: The motor vehicle driving license test is an official driving skill examination conducted within the territory of the People's Republic of China to obtain legal permission to drive a motor vehicle. Passing the test grants the corresponding registered license. 2. Others: The Ministry of Public Security of China has published the revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" on its official website. According to these regulations, the content and passing standards of the driving license test will be unified nationwide. On May 10, 2021, the Ministry of Public Security held a press conference to announce 12 convenience measures for deepening the "simplification of administration, decentralization, and optimization of services" reform in public security traffic management, under the theme "I do practical things for the masses."

Was this review help?
120
Share
DiRose
08/10/2025, 12:36:24 PM

I've been a driving instructor for many years, and there are quite a few point deductions in the reverse parking test. Crossing the line is the most common issue, such as the car body touching the edge line or corner line of the parking space—each instance deducts 10 points. If the solid line is severely crossed or the vehicle goes out of bounds, it might result in an immediate failure. Time limit is another headache—the entire reverse parking must be completed within 210 seconds, exceeding which deducts 100 points. Midway stops are also a big pitfall—if the wheels stop for more than 2 seconds, 10 points are deducted, and if it exceeds 5 seconds, the test might be halted directly. I always remind students that crossing the line is often caused by turning the steering wheel too early or correcting too slowly. During practice, use the rearview mirrors more to find the right reference points instead of just focusing on the front. Controlling the speed is crucial—too slow and you risk exceeding the time limit, too fast and you might stop unsteadily. During practice, drawing auxiliary lines on the ground to simulate the test can be helpful. Familiarity with the car's dimensions and rearview mirror positions is key, and nervousness during the test can negatively affect performance.

Was this review help?
3
Share
Expand All
Lane
09/23/2025, 12:16:53 AM

I just passed the Subject 2 driving test recently, and the point deductions during reverse parking still feel fresh in my memory. Touching the boundary line costs 10 points, while crossing it or running over solid lines means instant failure. Taking too long isn't allowed either—you must complete it within 210 seconds, and I nearly exceeded the time limit during several practice sessions. Never pause for more than 2 seconds when stopping, or you'll lose 10 points—my friend once got penalized for releasing the clutch too slowly. Misaligned vehicle body pressing against inner corner lines is another common deduction. During the test, the examiner closely watches whether wheels are straightened. I believe mindset is most crucial: take deep breaths before starting, use mirrors to align reference points when reversing, and don't obsess over timing. Practice narrow parking spaces frequently to improve precision. Adjust mirrors beforehand—improper alignment leads to visibility errors and boundary touches. Maintain tortoise-slow steady speed without sudden braking. Correct mistaken garage entries promptly without chaotic steering adjustments—examiners particularly dislike hesitant movements. Simulate test conditions repeatedly to avoid nervous errors during the actual exam.

Was this review help?
5
Share
Expand All
BrielleMarie
11/06/2025, 01:32:40 AM

The deduction criteria for reverse parking mainly include several points: pressing the parking space line or going out of bounds deducts 10 points; exceeding the time limit for reverse parking deducts 100 points; stopping for more than 2 seconds deducts 10 points; wheels not straightened or the vehicle not stabilized before entering the designated position may also deduct points. Pressing the line is the most common, often due to size errors; exceeding the time limit is usually caused by slow speed; frequent stops are mostly due to unstable clutch control. The exam tip is to focus on the reference points in the rearview mirror while reversing, maintain a steady speed, and avoid rushing.

Was this review help?
6
Share
Expand All
Saul
12/27/2025, 03:17:56 AM

When learning to drive, be cautious about the penalty points during reverse parking. Running over the parking line deducts around 10 points; the car body crossing the boundary or solid line results in major deductions or even failing the test; exceeding the time limit deducts 100 points; stopping for more than 2 seconds deducts 10 points. Wheels stuck near the line also easily incur penalties. It's recommended to adjust the seat and mirrors properly before starting; focus on the mirrors while reversing and avoid looking around; keep the speed slow but don't stop; if you run over the edge line, stay calm and continue reversing; practice drawing lines during training to simulate the scenario; remain composed during the test. Remember, running over the line is often due to steering too early or too late; exceeding the time limit is usually caused by dragging the speed; stopping results from operational gaps. Control the clutch well and find your own reference points.

Was this review help?
11
Share
Expand All
LawsonAnn
03/24/2026, 11:42:32 PM

Points deduction items for reverse parking include: points deducted for the vehicle body touching or crossing the line; points deducted for exceeding the time limit; points deducted for stopping for more than 2 seconds during the process; points deducted for wheels not being in place or the vehicle body not being properly aligned. Touching the inner or outer boundary lines deducts 10 points; time limit violations often occur due to low speed or excessive observation time; stopping deductions stem from hesitation in operation; special attention is needed for touching the corner lines of the parking space. The test rules are strict, and severely crossing the line results in immediate failure. Related techniques include maintaining a slow and steady movement; familiarizing yourself with the vehicle dimensions in advance; using rearview mirrors for assistance; planning the path before reversing; calmly readjusting if mistakes occur; memorizing reference points during practice to reduce errors. Ensure the wheels are straight when entering the space to avoid additional deductions.

Was this review help?
2
Share
Expand All
More Q&A

Can I skip driving practice due to an emergency?

No, generally you should cancel your appointment at least half a day in advance, otherwise it cannot be canceled and will still count as attended, affecting your practice opportunities. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill test. The test items for small cars (C1/C2) include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. During the test, if any of the following behaviors occur, the test for this subject will be terminated, the score will be invalidated, and you will need to reschedule the test: 1. Answering phone calls or checking pagers; 2. Disrupting the order of the test site; 3. Making loud noises or disobeying the staff's instructions.
120
Share

Which Lane to Enter After Making a Left Turn?

After making a left turn, motor vehicles should enter the middle lane. Here are the specific details: 1. Left-turn waiting zone: When the green light is on for straight-going lanes in the same direction, vehicles in the left-turn lane must move forward to the waiting zone and wait for the signal. The left-turn lane is extended by several meters with white dashed lines, directly connecting to the middle of the road. These white dashed lines mark the left-turn waiting zone, allowing vehicles in the left-turn lane to enter and wait for the turn when the green light is on for straight-going lanes in the same direction. 2. Scope of the left-turn waiting zone: The left-turn waiting zone extends from the original vehicle stop line to the center of the road, with a slight curve at the end and crossing the pedestrian crossing in the middle. Intersections with left-turn waiting zones require traffic signals to follow the rule of straight-going first, then left turns.
104
Share

What does the orange engine light mean?

The orange engine light indicates engine misfire, which can damage the catalytic converter. Engine misfire: The orange indicator is a warning light that illuminates when the engine is misfiring, potentially damaging the catalytic converter. In such cases, you must immediately reduce speed and drive cautiously to the nearest authorized dealer for engine inspection. The warning light indicates a fault in the exhaust system (e.g., damaged oxygen sensor), leading to deteriorated exhaust quality. Electrical instruments: Common automotive electrical instruments mainly include the ammeter, fuel gauge, water temperature gauge, and oil pressure gauge. Their function is to monitor and indicate the performance and status of various components, providing guidance for proper engine use and maintenance. To ensure these instruments work correctly and accurately indicate the performance and status of relevant components, they must be used properly and maintained in a timely manner.
113
Share

What does a spliced car mean?

A spliced car refers to a vehicle that has been involved in a severe accident, such as the front half of the body being damaged beyond repair through part replacement or where the cost of repair is too high. In such cases, repair shops may find another accident vehicle of the same model with severe damage to the rear half and splice the two together. These vehicles pose significant safety hazards. Below is an introduction to spliced cars: 1. Definition: A spliced car is one that violates national regulations regarding automobile production, involving the unauthorized assembly of parts to create a vehicle. 2. Issues: Spliced cars and modified cars are two entirely different concepts. Spliced cars generally suffer from poor quality, high costs, and often fail to meet safety inspection and operational technical standards. Some may even cause accidents due to assembly technical issues. Therefore, spliced cars are an illegal form of automobile production prohibited by the state.
111
Share

Where is the sunroof switch for the Audi Q2L?

The sunroof switch is located above the interior rearview mirror. Audi models feature a combination of buttons and knobs for the sunroof control. Press the sunroof button to open it diagonally. The knob has three settings for sunroof opening: slight opening, half opening, and full opening. When tilting/open the sunroof, the closed sunshade automatically opens partially/fully. Below are precautions for using the sunroof: 1. Before opening the sunroof, check for any obstacles on the roof that might hinder its sliding. 2. Avoid using the sunroof on bumpy roads to prevent damage to the sunroof and sliding rail components due to vibration. 3. Do not open the sunroof during rain or when washing the vehicle to prevent aging or rusting of the rubber seals and metal parts caused by water or moisture.
114
Share

What to Do When the One-Touch Window Control of the Volkswagen Lamando Key Fails?

Volkswagen Lamando key one-touch window control failure specific operations are as follows: 1. In-car window control: One method is to reactivate the in-car one-touch window function. Operate the left front main switch to check if all four windows can be controlled with one-touch. If not, raise the window to the top and hold for a few seconds to activate the function. 2. When the remote is out of battery: In this case, low-end models will display a message prompting to replace the remote battery. The Lamando window key control settings need to be configured via the central control. Click on the central control screen, enter the vehicle management interface, and click on the window switch settings.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.