···
Log in / Register

What are the maintenance items for a Camry at 20,000 kilometers?

3 Answers
VanIris
08/31/25 6:48am
Maintenance items at 20,000 kilometers generally include replacing the engine oil, oil filter, air filter, cabin air filter, spark plugs, etc. Below is a detailed introduction: Replacing the engine oil and oil filter: Replacing the engine oil and oil filter is an essential item. Due to the harsh conditions of high temperature and high pressure inside the engine, the shelf life of the engine oil is significantly shortened, and its performance greatly declines. Over time, it can no longer protect the engine. The oil filter prevents impurities from mixing into the oil, which can cause oxidation, leading to the formation of sludge and clogging the oil passages. The engine oil and oil filter should be replaced simultaneously. Air filter: If the air filter was not replaced during the 10,000-kilometer maintenance, it must be replaced at the 20,000-kilometer maintenance. The air filter's role is to block dust and particles that the engine might inhale during the intake process. If the filter is not cleaned for a long time, it can lead to dust entering the engine, causing abnormal wear on the cylinder walls. Spark plugs: If the car uses standard material spark plugs, preparations should be made to replace them at 20,000 kilometers. Spark plugs directly affect the engine's acceleration performance and fuel consumption. When you feel the engine lacks power, it's time for maintenance. The lifespan of spark plugs varies depending on the material.
Was this review help?
20
2
Share
LaVivienne
09/13/25 3:10am
I've been driving a Camry for many years, and the 20,000-kilometer maintenance involves quite a few items that require serious attention. Primarily, it includes changing the engine oil and oil filter to lubricate the engine and reduce wear; checking the air filter and replacing it if dirty to improve air intake efficiency; a thorough inspection of the tires, such as adjusting the tire pressure to the standard value and checking the tread depth for any abnormal wear; a key inspection of the braking system, including the thickness of the brake pads and the condition of the brake fluid, ensuring reliable stopping in critical moments; a full test of the lighting system, making sure all front and rear lights are functional; and checking the levels of fluids like coolant and transmission oil. I always go to the 4S dealership for maintenance—original parts are more reliable, preventing issues on the road. Proper long-term maintenance extends engine life, improves fuel efficiency, and ensures safe driving through regular upkeep.
Was this review help?
13
4
Share
Expand All
IsaacFitz
10/27/25 3:57am
I just got my Camry not long ago and found quite a few items when going for the 20,000-kilometer maintenance. The core tasks are changing the engine oil and oil filter to keep the engine running smoothly; checking the air filter, as clogging can affect power and fuel consumption; inspecting tire wear and adjusting tire pressure to avoid unexpected blowouts; brake inspection is essential, including brake pads and fluid; comprehensive lighting tests are necessary to ensure nighttime driving safety. I've learned some small tricks, like changing the air filter or checking tire pressure myself, which is simple and saves some money. It's recommended to choose an authorized service center for maintenance to ensure the quality of parts—don't save small money at the risk of big troubles. Regular maintenance saves hassle and prevents breakdowns or being stranded on the road, which can waste time.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Start a Levin?

The method to start a Levin is: 1. Insert the key and turn it to ACC position; 2. Observe the instrument panel, after the vehicle completes the detection of airbag electronic components, turn the key to START position to ignite and start the engine; 3. Immediately return the key to its original position after successfully starting the engine. Taking the 2021 Levin as an example, it belongs to the compact car category, with body dimensions of: length 4640mm, width 1780mm, height 1455mm, wheelbase of 2700mm, fuel tank capacity of 43L, and curb weight of 1410kg. The 2021 Levin features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 98PS, maximum power of 72kW, maximum torque of 142Nm, paired with an electronic continuously variable transmission.
17
5
Share

What are the reasons why a car motor won't start?

Car motor won't start due to: severe wear of starter carbon brushes, malfunction of starter control mechanism, or damage to starter clutch. Reasons why a car won't start after being parked for long time are: 1. Car battery is dead; 2. Low temperature causes reduced viscosity and rotation speed of engine oil; 3. Ignition system malfunction; 4. Insufficient fuel level; 5. Excessive carbon deposits inside engine; 6. Damaged fuel pump preventing fuel supply from fuel tank for combustion. Solutions include: 1. Check if battery is dead; 2. Inspect fuel pump for damage; 3. Verify sufficient fuel level; 4. Examine engine sensors for faults; 5. Check ignition system for issues; 6. Use heating rod to warm up engine oil.
8
2
Share

What is the width of the Mercedes-Benz E300L?

The dimensions of the Mercedes-Benz E300L are as follows: length 4609mm, width 1796mm, height 1460mm, and wheelbase 2789mm. Exterior Design: The sedan version of the Mercedes-Benz E300L shares the same design as the hatchback, featuring Mercedes' latest design language. With its low-slung body, the overall style appears more aggressive. Additionally, the wheelbase is 60mm longer than the hatchback, providing more spacious interior room. Interior Design: The interior instantly sets it apart from competitors. It's hard to imagine Mercedes offering such an interior at this level. The signature steering wheel is very premium, and the large central display and instrument cluster share the same LCD screen, which is a significant advantage in its class. The air vents still feature the circular design typical of C-segment cars, stylish and refined.
1
3
Share

What is the method for removing the cabin air filter of a Volvo XC60?

Volvo XC60 cabin air filter removal method is as follows: 1. After removing the clips located in the front part of the engine compartment on the passenger side, take out the sound insulation cotton; 2. Remove the cover plate, take out the old cabin air filter, and replace it with a new one. Taking the 2020 Volvo XC60 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4688mm, width 1902mm, height 1658mm, and a wheelbase of 2865mm. The curb weight is 1801kg. The 2020 Volvo XC60 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 300Nm, paired with an 8-speed automatic transmission.
4
2
Share

Where is the cabin air filter located in the Mazda3 Xingcheng?

The cabin air filter of the Mazda3 Xingcheng is located inside the sound insulation panel above the coolant reservoir. It can be accessed by removing the four rivets on the insulation panel. Taking the 2015 Mazda3 Xingcheng as an example, it belongs to the compact car category with body dimensions of 4505mm in length, 1755mm in width, and 1470mm in height, featuring a wheelbase of 2640mm. It has a fuel tank capacity of 55 liters and a curb weight of 1246kg. The 2015 Mazda3 Xingcheng is equipped with a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.6L naturally aspirated engine delivering a maximum horsepower of 107PS, a peak power output of 79kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
14
1
Share

What is the solution if a car exceeds its first maintenance period?

The solution for a car exceeding its first maintenance period is to negotiate with the 4S dealership. The main tasks during the first maintenance include: 1. Changing the engine oil, oil filter, cleaning the air filter, and checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires; 4. Inspecting the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verifying whether all switches and lights in the car are working properly. Precautions for the first car maintenance are: 1. Make an appointment in advance; 2. Record any malfunctions or questions encountered while driving and inform the staff during the maintenance registration.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.