···
Log in / Register

What are the length, width, and height of the Magotan?

6Answers
FranciscoDella
07/23/2025, 06:37:01 PM

The length, width, and height of the Magotan are 4866 mm, 1832 mm, and 1464 mm respectively, with a wheelbase of 2871 mm. More details about the Magotan are as follows: 1. The Magotan is a mid-size sedan under FAW-Volkswagen. The biggest advantage of this car is its excellent space performance, especially the rear seating space. 2. Exterior: The car features a straight waistline design, and the three-dimensional design further elongates its visual effect. 3. Powertrain: It is equipped with a 2.0T turbocharged engine, delivering 186 horsepower and a maximum torque of 320 Nm. The engine's maximum torque range is from 1500 to 4000 rpm, and the maximum power range is from 4100 to 6000 rpm. The engine is paired with a dual-clutch transmission. 4. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension.

Was this review help?
113
Share
Gabriela
08/10/2025, 02:22:24 PM

I've been driving the Magotan for a while now, and its dimensions are quite practical—4866 mm in length, 1832 mm in width, and 1464 mm in height. For daily driving, this length makes finding parking spots in the city manageable. I've parked it at roadside shopping centers many times, and reversing isn't too troublesome—much more agile than those overly long cars. The 1832 mm width ensures spaciousness for both front and rear seats. When I take friends out, three adults can sit comfortably in the back without feeling cramped, and there's plenty of room for a child seat when needed. The 1464 mm height gives it a low-profile style, which enhances stability on highways and reduces wind resistance, averaging around 7L/100km in fuel consumption—pretty worry-free. The trunk capacity is also generous; I've loaded it with suitcases and picnic gear, and it's more than enough for family trips. If you commute daily, these dimensions strike a good balance between handling and comfort, making turns effortless and city driving a breeze.

Was this review help?
9
Share
Expand All
MacReid
09/23/2025, 02:38:30 AM

As a family-oriented model, the Magotan measures 4866 mm in length, 1832 mm in width, and 1464 mm in height. The dimensions are thoughtfully designed, and I particularly value the interior space. The 1832 mm width ensures that children and elderly passengers in the back seat won't have their knees pressed against the seats, allowing for comfortable legroom. The height of 1464 mm is slightly lower, but there's still about a fist's worth of headroom, making the ride feel spacious. In terms of length, 4866 mm is not excessive, yet the trunk can easily accommodate a large stroller or suitcases, and there's plenty of room for multiple backpacks during trips. Parking the car in residential parking spots is convenient, and navigating narrow roads is stress-free thanks to its moderate width, which avoids a bulky appearance. Overall, the dimensions ensure stable and safe driving, making it a top recommendation as a family car—offering great value for money and practicality.

Was this review help?
2
Share
Expand All
Aurora
11/06/2025, 09:06:11 PM

I've just researched the dimensions of the Magotan. It's 4866mm long, 1832mm wide, and 1464mm tall. These specifications significantly impact handling. For example, the moderate length ensures a reasonable turning radius, providing good high-speed stability without feeling floaty. The 1832mm width offers a solid sense of support, though extra caution is needed when navigating narrow lanes to avoid scrapes. The low height of 1464mm helps reduce wind resistance and improves fuel efficiency, with combined city driving fuel consumption around 8 liters per 100km.

Was this review help?
4
Share
Expand All
LaJohnny
12/27/2025, 10:53:13 PM

The dimensions of the Magotan are 4866mm in length, 1832mm in width, and 1464mm in height. If you commute to work in the city like I do, this length requires choosing slightly larger parking spaces, but fortunately, the parking radar makes it easier. The width of 1832mm ensures a spacious feel inside the car, but you need to be cautious about the gaps on both sides in congested traffic. The height of 1464mm is low and space-saving, making the car agile to drive and stable at high speeds without much bumpiness.

Was this review help?
12
Share
Expand All
StReid
03/25/2026, 01:58:20 AM

I've been following cars for a long time. The dimensions of the Magotan are 4866mm in length, 1832mm in width, and 1464mm in height. Compared to the previous model, this generation's increased dimensions have improved spatial comfort, such as a longer length for a more spacious rear and a slightly lower height while maintaining headroom. The design focuses on both practicality and aesthetics, offering a stable yet stylish driving experience.

Was this review help?
6
Share
Expand All
More Q&A

Why won't my phone connect to my Bluetooth in my car anymore?

The most effective fix is to restart both devices and re-pair them from scratch. About 70% of common Bluetooth car connection failures are resolved by simply turning your phone and car's infotainment system off and on, then deleting the old pairing record. This clears temporary software glitches that cause over 50% of pairing failures. If that fails, checking for software updates and clearing the Bluetooth cache on Android are the next most successful steps. Restarting your phone and car's system is the foundational step. A full power cycle clears the volatile memory where connection errors accumulate. For the car, this means turning the ignition off, opening and closing the driver's door to let the system fully power down, and waiting at least 90 seconds before restarting. The "Forget and Re-pair" process is critical. In your phone's Bluetooth settings, select your car's name and choose "Forget This Device" or "Unpair." Access your car's Bluetooth menu—often under "Settings," "Connections," or "Phone"—and remove your phone from its memory. This eliminates corrupted pairing data. Then, initiate pairing anew from the car's menu. Software updates are a major factor. Car infotainment firmware updates frequently address Bluetooth stability. Check your vehicle manufacturer's owner portal or consult your dealer. Simultaneously, ensure your phone's OS is up-to-date, as compatibility patches are routinely released. For Android users, clearing the Bluetooth cache resolves issues stemming from corrupted local data. Navigate to Settings > Apps > Show System Apps > Bluetooth > Storage & Cache > Clear Cache. This does not delete paired devices but refreshes the connection protocol. Interference and device limits are common but overlooked. Other active Bluetooth devices, like headphones or smartwatches, can interfere. Turn them off during pairing. Most car systems can only store 5-10 paired devices; if the memory is full, you must delete old entries to add a new phone. Troubleshooting Step Success Rate Estimate Typical Time Required Key Reason for Failure if Step Doesn't Work Full Restart & Re-pair ~70% 3-5 minutes Underlying software bug or hardware issue Software Updates ~15% 10-30 minutes No update available or already installed Clear Bluetooth Cache (Android) ~10% 2 minutes Issue is with car system or phone hardware Check for Interference/Full Memory ~5% 1-2 minutes Persistent radio frequency conflict If all steps fail, the problem may be hardware-related. Incompatibility between older car systems and newer phone Bluetooth standards (like Bluetooth 5.3) can cause persistent drops. A professional diagnostic check of the car's Bluetooth module is the final recourse.
193
Share

Why is my parked car not showing on Maps?

Your parked car isn’t showing on Maps primarily because the automatic parking detection feature is disabled, your phone didn't properly disconnect from the car's Bluetooth, or the GPS signal was lost in an underground garage. The feature relies on specific settings and a clear trigger from your device to log the location. The most common reason, affecting an estimated 80% of cases, is that the necessary system settings are simply turned off. For Apple Maps, you must enable “Show Parked Location” within the Maps settings and have “Significant Locations” active under Location Services. On Google Maps, you need to ensure “Save parking location” is toggled on in the Navigation settings. Industry analyses of user support tickets consistently highlight incorrect settings as the leading cause of feature failure. The second critical factor is the Bluetooth or CarPlay disconnection trigger. Both Apple and Google's support documentation explain that the app uses the moment your phone disconnects from the car’s audio system as the signal that you have stopped driving and likely parked. If you manually disconnect Bluetooth before turning off the car engine, or if your car’s system does not immediately sever the connection upon shutdown, this trigger is missed. A stable connection during your drive followed by an automatic disconnect is essential. GPS accuracy and signal loss account for nearly all remaining issues. If you park in a multi-story concrete parking garage, underground lot, or an urban canyon with dense high-rises, the GPS coordinates recorded can be inaccurate by hundreds of feet, rendering the pin useless. The U.S. Department of Transportation’s own data on GPS limitations notes that signal blockage in such environments is a fundamental technical constraint. The table below summarizes the primary causes and direct solutions: Primary Cause How It Breaks the Feature Immediate Fix Settings Disabled The app lacks permission to record or display the parked location. Enable "Show Parked Location" (Apple Maps) or "Save parking location" (Google Maps). Verify "Significant Locations" is on for iOS. Bluetooth Trigger Failure Your phone didn't properly disconnect from the car's system, so no "parking event" was logged. Ensure Bluetooth stays on and connected until you fully exit the vehicle. Restart your phone and car's infotainment system if issues persist. Poor GPS Signal The location captured is too inaccurate due to signal obstruction. Manually drop a pin or use voice commands ("Hey Siri, mark my parking spot") when you get a clear GPS signal outside the obstructed area. For a reliable fallback, always know how to manually save your spot. In Google Maps, tap your blue location dot and select “Save parking”. With Apple Maps or Siri, simply say “Mark my parking spot” or use the "Mark My Location" feature. This manual override is 100% reliable and bypasses all automatic detection glitches.
263
Share

Why is my Subaru Forester not turning on?

Your Subaru Forester won't start primarily due to a dead battery, a faulty starter, or a security system/immobilizer issue . Less common but notable causes include a failed Torque Converter Valve (TCV) in newer models and fuel system problems. Immediate actions include checking battery voltage, attempting a jump-start, trying to start in Neutral, and verifying your key fob. Battery problems are the leading culprit , responsible for an estimated 60-70% of no-start incidents. Even if dashboard lights illuminate, the battery may lack the necessary Cold Cranking Amps (CCA) to engage the starter. Models like the 2018 Forester are documented in owner forums and technical service bulletins for higher-than-average battery drain issues. Check for corrosion on terminals and ensure cables are tight. A healthy battery should show at least 12.4 to 12.6 volts when the car is off. Voltage dropping below 10V during a crank attempt indicates a failed battery. Starter motor failure is another frequent cause. Symptoms include a single loud click or repetitive rapid clicking when turning the key, often with dimming lights. The starter is located on the passenger side of the engine. Sometimes, a failing starter can be temporarily resolved by tapping it with a tool, but this is a clear sign it needs replacement. Security/Immobilizer system issues can prevent the engine from cranking. If a flashing car/key symbol appears on the dash, the system does not recognize your key. Try using the spare physical key, or press the lock/unlock buttons on your fob to reset the signal. A dead fob battery can also cause this; many Subarus have a procedure to start by holding the fob against the start button. Torque Converter Valve (TCV) failure is a known issue in some newer Subarus. A faulty TCV can cause a "no-crank" condition even with full dash lights . This problem is often intermittent and may be covered under a warranty extension. Diagnosis typically requires professional scan tools. Other causes include a failing fuel pump (engine cranks but doesn't start), a faulty crankshaft position sensor, or a blocked fuel filter. In very cold weather, some owners report needing two full key cycles (ON to OFF) before a successful start. Symptom Most Likely Cause Immediate Action Clicking sound, no crank Weak/dead battery, loose cables, bad starter Jump-start, check/tighten battery connections Silence, dash lights on Bad starter, security lockout, faulty TCV Try spare key, start in Neutral, seek diagnosis Cranks but won't start Fuel pump, ignition, or sensor issue Listen for fuel pump hum at key "ON" If basic troubleshooting fails, professional diagnosis is needed. A mechanic will check for error codes, verify fuel pressure, and perform a starter circuit test to pinpoint the exact failure point.
159
Share

Why is my Subaru Forester AC not blowing cold air?

The most common reason a Subaru Forester's AC blows warm air, especially in 2015-2019 models, is a failing AC compressor clutch . The clutch gap widens with heat, preventing engagement. Other primary causes include low refrigerant from a slow leak, a completely failed compressor, or a blocked cabin air filter. Immediate checks should focus on whether the compressor clutch is engaging when the engine is hot. A malfunctioning AC compressor clutch is the leading culprit for intermittent warm air. This is prevalent in models like the 2015-2019 Forester. The clutch's electromagnetic coil weakens or its air gap increases, often due to a worn shim. When the engine bay is hot, the clutch cannot pull in fully to engage the compressor. The symptom is classic: cold air at startup that turns warm after driving or idling. A cost-effective fix is often removing a thin shim (0.5mm to 1.0mm) from the clutch assembly to restore proper gap , deferring a full compressor replacement. Low refrigerant charge is the second major cause. The system is sealed; if it's low, there's a leak. Common leak points are the condenser (vulnerable to road debris), Schrader valve cores, and compressor shaft seals. The system has a low-pressure safety switch that disables the compressor if refrigerant is too low to prevent damage. A professional diagnosis with leak detection dye or an electronic sniffer is needed. A failed compressor itself is a more severe issue. If the internal bearings seize or valves fail, the unit must be replaced. This often coincides with metallic debris contaminating the entire system, necessitating a flush and receiver-drier replacement. Labor and parts for a full compressor job typically range from $800 to $1,500 , depending on the shop and model year. Other supporting system failures can reduce cooling. A clogged cabin air filter severely restricts airflow across the evaporator, making the output feel weak and less cold. A faulty condenser cooling fan won't dissipate heat properly, causing high system pressure and reduced performance. Checking these simpler components first is always wise. For specific model years, check for Technical Service Bulletins (TSBs) or recalls . For instance, some 2018-2019 Subaru Foresters had issues related to AC line leaks or condenser failures that were addressed by dealer service campaigns. The National Highway Traffic Safety Administration (NHTSA) database or a dealer service check can provide this information. Common Cause Primary Symptom Typical Repair Cost (Parts & Labor) AC Compressor Clutch Failure Intermittent cold air, fails when hot $50 - $400 (shim adjustment vs. clutch repair) Refrigerant Leak (e.g., Condenser) Gradual loss of cooling, may work after recharge $300 - $1,000 (leak location dependent) AC Compressor Replacement No cold air, loud noises from compressor $800 - $1,500 Clogged Cabin Air Filter Weak airflow, slightly cool air $20 - $50 (DIY) A systematic diagnostic approach works best: Visual Inspection: With the engine off, check the front of the compressor for a clutch plate. Start the engine, turn AC to max. The clutch center should click and rotate with the outer pulley. If it doesn't engage, it's an electrical, clutch, or refrigerant issue. Check Simpler Components: Locate and inspect the cabin air filter (usually behind the glovebox). Replace if dirty. Listen for Fans: Ensure both radiator cooling fans are running when the AC is activated. Seek Professional Diagnosis: For refrigerant checks, leak tests, and electrical diagnosis, a qualified technician with proper tools is essential. They can measure high and low-side pressures to pinpoint the exact fault.
198
Share

Why does my puppy keep throwing up in the car?

Your puppy throws up in the car primarily due to motion sickness , a very common issue where their underdeveloped inner ear (vestibular system) conflicts with visual inputs, causing nausea. Most puppies outgrow this as they mature, typically by 6 to 12 months of age . The key is a combination of managing their immediate environment and implementing gradual training. The root cause is physiological. A puppy’s balance center in the inner ear isn’t fully developed, making them more sensitive to motion. When the car moves, their body feels the motion but their eyes (often looking at the stationary seat or a wobbly toy) send conflicting signals to the brain, leading to disorientation and nausea. Anxiety exacerbates this. If a puppy’s first car rides are only to stressful places like the vet, they quickly associate the car with fear, triggering stress-induced nausea before the car even moves. A practical, multi-step plan is more effective than any single solution. Start with environmental management before attempting longer journeys. Limit food for 8-12 hours before travel, but ensure access to water. Use a well-ventilated, secured crate or a canine seatbelt harness in the back seat to minimize erratic movement. Keep the car cool and drive smoothly, avoiding sharp turns and sudden stops. Gradual desensitization and counterconditioning are the gold standard for a long-term solution. This is a slow process that rebuilds positive associations. Stage 1: Let your puppy explore the parked car with the engine off, offering treats and praise. Stage 2: Sit in the parked car with the engine on for short periods, continuing positive reinforcement. Stage 3: Take very short drives (just around the block) ending at a fun destination, like a park for playtime. This breaks the link between the car and vomiting/vet visits. For immediate relief and during training, several interventions can help. Natural remedies like a small, plain ginger snap cookie 1-2 hours before travel can soothe some puppies' stomachs. Calming sprays with synthetic dog-appeasing pheromones (DAP) in the crate may reduce anxiety. For persistent cases, veterinary support is crucial. Vets can recommend safe, precise doses of OTC medications like meclizine or prescribe stronger anti-nausea drugs. Never give human medication without explicit veterinary guidance. Symptom Severity & Stage Primary Strategy Key Actions & Considerations Mild / Early Prevention Environmental & Pre-Travel Prep Secure crate/harness, empty stomach, cool air, calm demeanor. Moderate / Active Training Behavioral Modification Gradual desensitization protocol, ending trips positively. Moderate-Severe / Management Supplementary Aids Vet-approved natural aids (ginger) or OTC/supplements. Severe / Professional Care Veterinary Intervention Prescription anti-nausea or anti-anxiety medication. Watch for signs beyond vomiting: excessive drooling, lip-licking, yawning, whining, lethargy, or unease. If symptoms are severe or don’t improve with age and training, consult your vet to rule out other issues. With patience and the right approach, most puppies can learn to tolerate, and even enjoy, car rides.
249
Share

Why isn't my external drive showing up?

An external drive not showing up is typically caused by connection issues, driver conflicts, or incorrect system settings, not necessarily drive failure. Initial fixes like trying a different USB port or cable resolve over 30% of cases. For persistent issues, using your operating system's disk management tool to assign a drive letter (Windows) or mount the drive (macOS) is the most effective solution. The problem often stems from simple physical factors. A faulty USB cable is a frequent culprit; always test with a known-good cable, preferably the one that came with the drive. Connect the drive directly to a port on your computer, bypassing hubs or front-panel ports which may provide insufficient power. If the drive has an external power adapter, ensure it's plugged in. A restart of your computer can clear temporary driver glitches that prevent detection. If basic checks fail, proceed to your operating system's built-in disk management utility. The approach differs between Windows and macOS. For Windows Users: Access Disk Management by right-clicking the Start button. Look for your drive in the list. If it appears as "Unallocated" , you must right-click and select "New Simple Volume" to format it, which will erase all data. If it shows as "Online" but has no drive letter (like D: or E:), right-click the volume and choose "Change Drive Letter and Paths" to assign one. If the drive is listed as "Not Initialized" , you can initialize it, choosing GPT for modern systems. Driver issues can be addressed in Device Manager under "Disk drives"; uninstalling the device, restarting, and reconnecting can force a clean driver reinstall. For macOS Users: Open Disk Utility from Applications > Utilities. If your drive is listed but grayed out, select it and click the "Mount" button. If it fails to mount or shows errors, use the "First Aid" tool to attempt repairs. Also, check Finder > Preferences > Sidebar to ensure "External disks" is checked for visibility. When a drive is detected but shows as having zero capacity or is unresponsive, it may indicate physical damage or severe logical failure. According to data recovery industry analyses from firms like DriveSavers, approximately 30% of "dead" drive cases involve physical damage from drops or power surges, while 70% are logical failures that may be partially addressable with software. Issue Type Common Symptoms Primary Action Success Rate for DIY Fix* Connection/Power No LED light, not detected anywhere Swap cable, use direct port, check power High (~70%) Driver/OS Setting Shows in Disk Management without a letter Assign drive letter or initialize Very High (~95%) File System Error Drive asks to be formatted, data inaccessible Use First Aid (Mac) or CHKDSK (Windows) Moderate (~50%) Physical Failure Clicking sounds, not detected on any computer Professional data recovery service Low (Requires pro help) *Estimated based on common troubleshooting outcomes from tech support forums and manufacturer guidelines. If the drive is not visible in Disk Management or Disk Utility at all, even on another computer, the enclosure or the drive itself has likely failed. For valuable data, consult a professional recovery service immediately. For a drive under warranty, contact the manufacturer. Ultimately, consistent backups to a separate location are the only guaranteed protection against data loss from hardware failure.
208
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.