
Car first free items generally include: engine oil change, tightening chassis screws, checking tire pressure, full vehicle oil and water inspection, full vehicle lighting inspection, cleaning air filter, cleaning air conditioning filter, engine dust cleaning, replenishing windshield washer fluid and radiator water. Below are the relevant introductions for the first maintenance: 1. Oil change: Pay attention to the oil model and brand, and ensure the oil container is original and unopened. It's best to take a photo with your phone for later reference to experience the engine performance after maintenance. 2. Tightening car screws: Many cars leave the factory with screws not tightened excessively due to considerations for the break-in period and new car settling. During the first maintenance, after the break-in period, the mechanic will tighten all connecting screws according to the torque specified in the manual. 3. Tire pressure: The standard tire pressure is about 2.2~2.6 bar. Over-inflation can increase tire wear and may cause blowouts, while under-inflation can increase fuel consumption and vehicle bumpiness. Generally, tire pressure can be slightly lower in summer and slightly higher in winter. 4. Oil and water inspection: Includes comprehensive checks of engine oil, power steering fluid, transmission oil, and brake fluid. 5. Lighting inspection: Includes checking the height, deviation, brightness of headlights, whether bulbs are damaged, and if lights can switch normally; followed by checking rear tail lights. 6. Air filter and air conditioning check: Air conditioning cooling and heating effectiveness, airflow volume. 7. Engine inspection: Mainly checks wiring harnesses, pipelines, chains or belts for wear and cracks, any odors in the compartment, and oil leaks. 8. Replenishing windshield washer fluid and radiator water: Windshield washer fluid is specifically designed for cars, characterized by not causing rust in car parts and freezing in winter.

I've experienced quite a few first services, which mainly involve changing the engine oil and oil filter to ensure smooth engine lubrication and prevent premature wear. It's also essential to check tire pressure and tread wear, as incorrect pressure can lead to blowouts or unstable driving at high speeds. All fluids need a thorough inspection - low coolant can cause engine overheating, insufficient brake fluid makes braking unreliable (especially dangerous), and windshield washer fluid should be topped up for clear visibility. The lighting system requires testing to confirm all bulbs (including headlights and turn signals) are functioning to avoid nighttime blind spots. Replace dirty air filters to improve engine efficiency. Additionally, inspect brake pad thickness and battery condition to prevent sudden failures. First maintenance is typically done around 5,000 kilometers - don't delay. Regular maintenance significantly extends vehicle lifespan and saves money by avoiding costly major repairs later.

I love cars dearly and personally handle every item in the first service. First, an oil change is essential to flush out engine impurities. Fluid checks include coolant to prevent overheating, brake fluid to ensure braking safety, and topping up windshield washer fluid for clear visibility. Proper tire inflation and checking for wear patterns ensure stability at high speeds. Light testing is crucial—all lights must function properly to prevent accidents. Replacing the air filter optimizes air intake efficiency and boosts performance. The dealership will also reset the maintenance reminder light for the next service. It's advisable to keep extra windshield washer fluid on hand. While these tasks are simple, they're critical—performing them on schedule keeps the car in top condition, saving you hassle in the long run.

As a new car owner, I understand the basic items for the first . Oil change is crucial to protect the engine from damage. Fluid levels must be checked to ensure they are sufficient; coolant should not be low, and insufficient brake fluid can affect stopping. Ensure all lights are working for nighttime safety. Tire pressure should be at the standard level, and check for wear or cracks. Inspect the brake system for pad thickness to prevent delays. Clean the air filter to keep the engine running smoothly. All these items can be completed at a 4S shop for around a thousand bucks—don't overlook them, as they ensure safety for long trips. Simple, easy, and effective.

From a cost-saving perspective, some first items can be DIY. It's more cost-effective to change the oil filter at a shop, while checking fluid levels like coolant, brake fluid, and topping up windshield washer fluid can save some money. Testing lights is simple—just use the switch to check if they work. Checking tire pressure weekly with a gauge can prevent issues. However, critical points like brake inspections, which are safety-related, must be handled professionally—don't skimp here. Schedule the service at 6 months or 5,000 km, and booking in advance might get you a discount. Overall costs aren't high, so balance savings with ensuring worry-free driving.

In terms of safety, the first items are crucial. Oil changes protect engine lifespan, ensure smooth driving, and reduce failures. Fluid checks like coolant prevent high-temperature damage, while low brake fluid poses a high risk of brake failure. Light tests prevent nighttime blind-spot accidents—headlights and turn signals must be inspected. Improper tire pressure affects handling stability and can lead to loss of control at high speeds, requiring attention. Battery condition checks prevent starting difficulties. Each item in the overall maintenance checklist is interconnected with safety—neglecting any item plants hidden risks. Regular maintenance ensures your journey remains safe and reliable.


