···
Log in / Register

What are the five operations in driving test subject two?

6Answers
DelQuinn
07/29/2025, 09:21:52 PM

Subject two of the driving test includes five operations: hill start, parallel parking, right-angle turn, S-curve, and reverse parking. Below are specific techniques for driving test subject two: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing subject two. Ensure the vehicle doesn't stall while keeping the speed as slow as possible, allowing ample time to adjust each operation. 2. Adjust mirrors properly: After getting in the car, always adjust the mirrors correctly, which is especially important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, reference points on the car, and reference points on the ground. During subject two operations, it's crucial to accurately locate and observe these points for precise execution. 4. Pay attention to the four corners of the car: The front corner during reverse parking tends to scrape the outer line, while the rear corner may scrape the side lines of the parking space; the front corner during S-curve driving is prone to crossing the line; the front corner during right-angle turns is likely to cross the line; the front corner during parallel parking may scrape the outer line or the left front corner of the parking space, and the right rear corner may scrape the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.

Was this review help?
115
Share
EmiliaLynn
08/15/2025, 03:00:46 AM

I remember practicing the five maneuvers in Subject 2 of the driving test for a long time. Reversing into a parking space was the basic skill—backing the car into a simulated parking spot while controlling the steering wheel to avoid touching the lines. Parallel parking simulated roadside parking, requiring precise judgment of the parking space. Stopping and starting on a slope involved coming to a complete stop on an incline and then restarting, being careful not to roll back or stall. The 90-degree turn was simply making a sharp right-angle turn. And the curve driving test involved smoothly navigating an S-shaped bend. At first, I kept stalling during hill starts, but later the instructor taught me some techniques for coordinating the clutch and throttle, and after a few practices, I got the hang of it. Parallel parking was the hardest because it demanded a strong sense of spatial awareness, requiring me to check the mirrors frequently and reverse slowly. The day before the test, I went to the practice site for a few more rounds, keeping in mind that controlling the speed was crucial—no need to rush nervously.

Was this review help?
14
Share
Expand All
MarianaRose
10/20/2025, 02:41:31 AM

As a parent accompanying my child to get a driver's license, I learned that the five operations in Subject 2 are reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. Reversing into a garage requires accurately backing into a designated spot; parallel parking hones parking precision; stopping steadily and starting on a slope tests balance; turning at a right angle practices steering response; and driving on a curve ensures safe and smooth navigation through bends. I recommend beginners practice parallel parking more, as it's frequently used in daily parking situations. Finding an empty spot to practice a few times can make it easy to master. Safe driving habits start with the basics, and passing Subject 2 ensures confidence on the road. During the test, don't rush—stay steady and you'll succeed.

Was this review help?
16
Share
Expand All
VanJayden
12/03/2025, 02:12:57 AM

The five items of Subject 2 driving test include reverse parking into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. When I took the driving test, reverse parking took the most time because incorrect steering easily led to crossing the line. Starting on a slope requires coordination between the clutch and accelerator. Curve driving relies on maintaining a steady speed. Getting guidance from an instructor on details is helpful. Familiarize yourself with the layout of the test site before practicing, and control your speed to avoid going too fast.

Was this review help?
8
Share
Expand All
MacFinn
01/23/2026, 03:36:39 AM

When I was young, learning to drive involved practicing the five items of Subject 2: reversing into a parking space accurately by finding the right reference points; parallel parking by the roadside; stopping steadily on a slope before moving again; making sharp turns smoothly; and driving steadily through curves. The instructor always said to drive slowly, pay attention to the markings, and avoid distractions. Nowadays, I see young people passing the test quickly, but the fundamentals require more practice and accumulated experience—parallel parking, for example, tests one's patience.

Was this review help?
15
Share
Expand All
VonGeorge
04/19/2026, 03:01:54 AM

Having experienced the teaching of Subject 2, the five operations are reverse parking, parallel parking, hill start and stop, right-angle turn, and curve driving. For reverse parking, aim at the reference point to steer; for parallel parking, pay attention to the car body position; for hill start, prevent rolling back by coordinating with the handbrake; for right-angle turn, steer the wheel in time; for curve driving, maintain a steady speed within the line. Beginners are advised to start with basic reverse parking and gradually progress to curve driving, keeping a calm mindset during the test and frequently using the rearview mirror for observation.

Was this review help?
12
Share
Expand All
More Q&A

Introduction to Honda Fit Gear Positions?

Introduction to Honda Fit gear positions is as follows: 1. P (Parking Gear): When this gear is engaged, the transmission locking mechanism activates, so it should only be engaged after the vehicle comes to a complete stop. 2. R (Reverse Gear): The reverse gear is located behind the parking gear and can only be engaged when the vehicle is stationary. 3. N (Neutral Gear): The neutral gear is positioned after the reverse gear. When engaged, the engine power is not transmitted to the wheels, typically used for short stops. 4. D (Drive Gear): All forward gears can automatically shift up or down, with the shifting timing determined by engine load, individual driving style, and vehicle speed. 5. S (Sport Gear): In sport mode, the transmission can shift freely. During driving, simply push the gear lever into the S position, commonly used for climbing hills and overtaking. 6. L (Low Gear): When the low gear is engaged, the transmission locks in first or second gear to keep the engine within the maximum torque RPM range for an extended period, generally used for steep uphill climbs.
111
Share

How to Avoid Scraping the Curb When Turning Right?

Leave enough space on the right side to facilitate the entry and exit of passengers from the left vehicle's front passenger seat. A distance of 60cm between the two vehicles is most appropriate. To avoid hitting the curb when parking as close to the inside as possible, if there is a step behind the car, you can first get out of the car to observe.
116
Share

How to engage reverse gear in Haval H2 manual transmission?

Engaging reverse gear requires overcoming significant resistance, which is noticeably felt by the driver. To shift into reverse, firmly press the gear lever downward and then move it to the reverse position. For reverse gear, the pull ring under the shift knob must be lifted upward before engaging reverse.
105
Share

Does Replacing the Steering Column Have a Significant Impact on the Car?

Replacing the steering column in a car may affect the overall handling feel, and the impact could be a change, not necessarily for the worse. There may be slight differences in the matching of parts from different batches, and even mass-produced vehicles of the same model and year can vary. Industrial products cannot achieve complete consistency, and what is needed is simply adaptation. The effects of a faulty steering column on the car's steering are as follows: 1. Methods to identify a faulty steering gear include: unstable steering while driving, increased free play in the steering wheel, difficulty in the steering wheel returning to center, understeer or oversteer, steering wheel vibration, steering wobble, heavy steering, and unusual noises from the steering gear; 2. A faulty steering gear may exhibit the following issues: unusual noises when turning the steering wheel while stationary; noises whether stationary or driving at speeds below 20 km/h; very loose steering during turns or extremely heavy and difficult steering wheel rotation; 3. A typical power steering pump failure can cause difficulty in turning the steering wheel, resulting in abnormally heavy steering while driving.
103
Share

How to Display the Average Fuel Consumption on Geely Binrui?

First, start the vehicle and fasten the seat belt. On the Geely Binrui, the fuel consumption display is located on the lower right button of the right side of the steering wheel. Open the various options and scroll up or down to find it.
102
Share

What is the fuel consumption of a 150-horsepower diesel engine?

150kw diesel generator set fuel consumption = 31.5 kg (kg) = 39.4 liters (L). The following are precautions for using a diesel engine: 1. Crankshaft: When the diesel engine thrust plate is in use, the axial limitation of the crankshaft is exerted by the cylindrical pin mechanism and the crankshaft transmission gear that rotates with the crankshaft. 2. Thrust bearing: The thrust bearing is mainly used to ensure the axial clearance of the crankshaft, ensuring that the lubricating oil will be in contact with the friction surface of the crankshaft. The bearing installed in the timing gear cover is thin in front and thick in the back, and must not be installed incorrectly. It must also be noted that the four tank sides should face outward. 3. Fan: The fan is the core of the radiator fan, quickly eliminating the mat through airflow and accelerating the cooling water. The fan is installed and used on the 6135 diesel engine. Observe the high-pressure air surface (concave arc) of the front fan of the high-end diesel. If there is no protective installation or the fan has no air pressure, the air will blow out from the side, affecting the airflow of the fan and the cooling of the radiator.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.