How to engage reverse gear in Haval H2 manual transmission?

Can the charging gun be used in the rain?

It is possible to charge an electric vehicle on rainy days. The charging port is insulated, and its complex structure ensures that it is difficult for water to enter during the charging process. It also has drainage design, and once the charging gun is plugged in, the charging port is in a sealed state, with a dustproof and waterproof standard of IP54 or above. Safety during charging is further ensured through grounding and online monitoring. Here are two aspects explaining why charging in the rain is safe: 1. Structural waterproofing: Whether it's an AC or DC charging pile, a closer look at the charging port area reveals that its design is very ingenious. The conductive parts of the plug are relatively deep, ensuring not only a tight and reliable connection between the plug and socket during charging but also making it difficult for scattered rainwater to come into contact with the conductive parts when inserting or removing the charging gun. The design has taken into account the scenario of charging the vehicle on rainy days from the outset. The metal parts of the plug are deep, and the mating section with the socket is long, making it difficult for rainwater to enter once properly connected. Additionally, both AC and DC charging sockets have a rubber sealing ring around the mating surface of the plug and socket to prevent direct intrusion of rainwater during charging. 2. Electrical design ensures charging safety: Before formal charging begins, during the insertion of the charging gun into the socket, the charger checks whether the 'charging confirmation terminal' is properly connected to determine if grounding and physical connection are successful. It also controls and monitors the charging process through the 'charging control terminal' or 'CAN terminal.' If insulation faults or leakage currents are detected, the charger and BMS will promptly interrupt the charging process. There is a grounding terminal on both the charging socket and the charging gun, which effectively grounds any hazardous current in case of a fault (such as leakage current) before or during charging, ensuring personal safety. Therefore, under such standards, charging an electric vehicle is completely safe as long as it's not a heavy downpour. Even in heavy rain, if the charging gun is well wrapped with plastic sheeting, charging can still be performed.

118

Share

Does Adding Half a Kilogram of Windshield Washer Fluid Affect Antifreeze?

Adding half a kilogram of windshield washer fluid to antifreeze has an impact because the washer fluid lowers the boiling point of the antifreeze, preventing the engine from being effectively cooled. Precautions for mixing antifreeze: The same brand of antifreeze must be used. Different brands of antifreeze have varying production formulas, and mixing them may cause chemical reactions between multiple additives, rendering them ineffective. Functions of antifreeze: Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. The main components of antifreeze are: 50% purified water, 40% methanol, and 10% other substances. How to choose antifreeze: The basic indicators of antifreeze are freezing point and boiling point. The market offers antifreeze with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region.

118

Share

What Are the Solutions for Chassis Abnormal Noises?

Solutions for chassis abnormal noises are as follows: 1. Interference between components: Repair or replace related components to eliminate interference. 2. Loose bolts or nuts: This may be due to insufficient tightening torque or incorrect bolt specifications. 3. Faulty driveshaft universal joint: Replace with a new driveshaft universal joint. 4. Abnormal noises caused by damage to ball joints, suspension, or connecting brackets: Replace with new ball joints or support pads. Causes of chassis abnormal noises are as follows: 1. Noise from disc brakes: Disc brake shoes are installed on the brake caliper support frame, with anti-noise pads on the back, friction plate support plates or support springs on the sides, and vibration-damping spring plates or guide plates at the top and bottom. These components support, guide, position, and dampen the brake shoes. If any part is bent, deformed, damaged, or missing, it will lose its function and cause abnormal noise. 2. Noise from front suspension ball joints: Small vehicles use various front suspension types, such as longitudinal leaf springs, transverse leaf springs, torsion bars, or coil springs. Ball joints are often used instead of kingpins for suspension connections. Ball joint assemblies are usually sealed and non-serviceable. Without grease fittings, lubrication is difficult, leading to noise over time due to wear, road conditions, or lack of lubrication. 3. Noise from front wheel shock absorbers: Damaged shock absorbers worsen driving conditions. External signs include oil leakage, accompanied by abnormal noise. 4. Noise from driveshaft universal joints: Faulty front-drive constant-velocity joints produce noise during driving, especially when turning or accelerating suddenly, resulting in a "clicking" sound.

109

Share

Which part of the tire will experience increased wear due to low tire pressure?

Tire pressure that is too low will cause increased wear on the sidewalls of the tire. Here are the details regarding tire wear: 1. Wear details: Low tire pressure mainly leads to tire chafing. Because the tire pressure is too low, the inner tire collapses. During vehicle operation, the inner tire is constantly rubbed for extended periods, which over time makes the tire more prone to blowouts. 2. Precautions: Regularly check the tire pressure when using tires. The tire pressure of a car directly affects the condition of the tires. Low tire pressure increases friction with the ground, leading to accelerated tire wear. Therefore, it is important to maintain stable tire pressure during tire use, and the tire pressure value should ideally be based on the parameters set by the vehicle manufacturer.

119

Share

Where to Recycle Old Car Engines?

Long-term recycling of old car engines can be found at auto parts markets and other locations. Below is a brief introduction about engines: 1. Basic Information: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. The first external combustion engine was invented in 1816 by R. Stirling in the UK (Scotland), which was later improved by Watt into the steam engine. 2. Applicable Devices: Engines can be used as power generation devices or refer to the entire machine including the power unit (e.g., gasoline engines, aircraft engines). Types include internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.

104

Share

What are the regulations for high beam headlights on highways?

Highway high beam regulations are based on reasonableness, separation, and distance from the vehicle ahead. Reasonableness: When driving at night, proper use of headlights not only illuminates the road ahead but also avoids affecting the safety of other drivers. Separation: When there is a median barrier such as vegetation or a divider between lanes, using high beams will not affect oncoming traffic. However, it's important to note that vegetation barriers must be continuous and opaque. For spaced barriers like trees, drivers should switch to low beams at appropriate times. The maximum range of high beams is typically 120 meters, and drivers should switch to low beams when oncoming traffic is within 150 meters. Distance from the vehicle ahead: Highway speeds are generally around 100 km/h, and drivers should maintain a distance of at least 100 meters from the vehicle ahead. Therefore, high beams can be used when the distance to the vehicle ahead exceeds 150 meters. When the distance decreases, drivers should switch to low beams at the appropriate time. It's crucial to monitor the distance to the vehicle ahead. Highway speeds are generally around 100 km/h, and drivers should maintain a distance of at least 100 meters from the vehicle ahead. Therefore, high beams can be used when the distance to the vehicle ahead exceeds 150 meters. When the distance decreases, drivers should switch to low beams at the appropriate time.

107

Share