What are the benefits of replacing spark plugs?

2 Answers
MacLeilani
07/28/25 4:39pm
Replacing spark plugs can improve the vehicle's power performance. Spark plugs themselves are consumable parts that require regular replacement. If spark plugs are damaged, they can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the normal operation of the vehicle. Severe spark plug erosion, blistering at the top of the spark plug, damage, or melted and eroded electrodes all indicate that the spark plug is damaged and should be replaced. Spark plug location: Spark plugs are installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables. Over the past decade, most car engines have been modified to connect the ignition coil directly to the spark plug. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. Generally, platinum spark plugs should be replaced every 40,000 kilometers, standard nickel alloy spark plugs every 20,000 kilometers, and iridium spark plugs every 60,000 to 80,000 kilometers.
Was this review help?
14
2
Share
KeeganDella
08/11/25 11:25pm
Last year, I replaced the spark plugs in my car, and the results were fantastic. After the replacement, the engine ignition improved immediately, throttle response became much quicker, acceleration was no longer sluggish, and overtaking felt more confident. Fuel consumption dropped noticeably—previously around 11 liters per 100 kilometers, now down to about 10.5 liters, saving a lot on fuel costs over time. Engine noise also reduced, no longer buzzing on the highway. The mechanic mentioned that old spark plugs failing to ignite properly could lead to incomplete combustion, wasting fuel and potentially causing carbon buildup issues. It's recommended to replace them every 30,000 kilometers, opting for platinum or iridium materials for stronger ignition and durability, avoiding costly engine overhauls in the future. After the replacement, the driving experience was upgraded instantly, making it feel like driving a brand-new car.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What engine does the Lifan 530 have?

The Lifan 530 is equipped with either a 1.3L naturally aspirated engine or a 1.5L naturally aspirated engine. Detailed specifications of the Lifan 530's engines are as follows: 1. The 1.3L naturally aspirated engine delivers 94 horsepower and 119 N·m of maximum torque. This engine features multi-point fuel injection technology and utilizes an aluminum cylinder head with an iron cylinder block. It is paired with a 5-speed manual transmission. 2. The 1.5L naturally aspirated engine produces 103 horsepower and 133 N·m of maximum torque. This engine also employs multi-point fuel injection technology and combines an aluminum cylinder head with an iron cylinder block. It can be matched with either a 5-speed manual transmission or a CVT transmission.
18
2
Share

What documents and procedures are required for purchasing a car in another city?

Purchasing a car in another city requires an ID card and a temporary residence permit. If financing is needed, additional documents such as a formal invoice, vehicle qualification certificate, payment of purchase tax, and compulsory traffic insurance are required. These can be processed locally for car financing. The required documents may vary depending on the region of purchase, so it is advisable for consumers to consult relevant departments in advance to avoid issues during the purchase process. Key considerations for purchasing a car in another city include: 1. Purchase invoice: The car purchase invoice is a crucial document, containing important information such as the buyer's details, vehicle price, and VIN code. Always request this invoice, as it is essential for vehicle registration. 2. Ensure all documents and keys are obtained: The car invoice, qualification certificate, and spare keys must all be collected upon delivery. Pay attention during the pickup process to avoid future inconveniences that could disrupt normal vehicle use and cause trouble for the owner.
7
0
Share

Why is it recommended to replace bumpers during repairs nowadays?

Because it mainly depends on the extent of damage to the bumper, which the repair technician will make a clear judgment on. If the front bumper is cracked, the decision to repair or replace it can be based on the size of the crack. If the crack is relatively small, it can be welded and repaired. If it exceeds the repair standard, replacement is necessary. Below is relevant information: 1. Introduction: The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. Many years ago, front and rear car bumpers were made of steel plates stamped into channel steel and riveted or welded to the frame longitudinal beams. 2. Function of the bumper: The bumper primarily serves as a buffer to absorb and alleviate external impacts. During low-speed collisions, the bumper can reduce the impact force and protect the vehicle body. If the damaged area of the bumper is large, repair is unnecessary, as it would not provide the intended buffering effect even if repaired.
9
5
Share

What engine does the Great Wall Cannon use?

Great Wall Cannon is equipped with a 2.0T turbocharged engine. Here are the detailed introductions about Great Wall Cannon: 1. Great Wall Cannon is a pickup truck launched by Great Wall Motors. In terms of power: Great Wall Cannon is equipped with a 2.0T turbocharged engine, with a maximum power of 140kw and a maximum torque of 360 Nm. 2. In terms of transmission: it is matched with an 8-speed automatic transmission. Great Wall Cannon is the highest-end product in Great Wall Pickup's lineup, and this model is based on the Great Wall P71 platform, which is Great Wall's latest vehicle manufacturing platform. 3. Under working conditions: the engine can output the maximum power of 140kw when the engine speed is between 4000-5500 rpm, and the engine can output a torque of 360 Nm when the engine speed is between 1800-3600 rpm.
5
2
Share

What Causes the Noise When Braking a Car?

There are several reasons for noise when braking a car: 1. If there is a slight squeaking sound at the pedal position when lightly pressing the brake while the vehicle is stationary, this is mostly caused by the return spring of the brake light switch on the brake pedal; 2. If there is a noticeable squeaking sound when braking at low speeds, the noise comes from the brake disc area. Many new cars or those that have recently had their brake pads replaced often experience such braking noise issues during driving. The steps to check the brakes are: 1. Inspect the brake pads. The effectiveness of braking largely depends on the condition of the brake pads, so checking whether the wear level of the brake pads is normal is crucial for ensuring braking performance; 2. Check the brake fluid. It is important to consider the weather characteristics of your location and destination to prevent excessive moisture from entering the brake fluid, which could adversely affect braking.
4
0
Share

Can You Still Drive When the Vehicle Maintenance Warning Light Comes On?

You can drive, but it is advisable to seek assistance from a repair technician to diagnose the issue. Here is a detailed introduction about automotive maintenance: Overview: Automotive maintenance is a general term for vehicle upkeep and repair. It involves using technical methods to diagnose faults in a malfunctioning vehicle, identify the cause of the issue, and take necessary measures to resolve the fault and restore the vehicle to a certain level of performance and safety standards. Other Information: Vehicle maintenance includes major repairs and minor repairs. Major repairs refer to restorative repairs that involve repairing or replacing any vehicle components (including foundational parts) to restore the vehicle's optimal technical condition and fully (or nearly fully) recover its lifespan. Minor repairs refer to operational repairs that involve replacing or repairing individual parts to ensure or restore the vehicle's operational capability.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.