Should You Pay Attention to the 60 km/h Speed Limit on Highways?

1 Answers
DeMackenzie
07/30/25 1:52am
You should pay attention to the 60 km/h speed limit on highways. The most direct indicator on highways is the speed limit signs. Since the implementation of the highway purification project, previously mislabeled speed limit signs have been removed, so the remaining speed limit signs are specifically used to alert drivers. If you encounter a 60 km/h speed limit sign, you need to reduce your speed to within the limit. This speed limit warning indicates that there will be changes in the road conditions ahead, so extra caution is required. Reasons for the 60 km/h speed limit: Highways have designated speed limits, such as 100 km/h. If you see a 60 km/h speed limit sign ahead, you need to slow down and adjust your speed to the appropriate range. This is usually because there may be construction, sharp turns, steep slopes, or accident-prone sections ahead. Construction zones typically impose temporary speed limits, while the latter situations involve permanent speed limits. In any case, it is necessary to reduce your speed. Penalties for exceeding the 60 km/h speed limit on highways: Monitoring devices for speeding are set to detect vehicles exceeding the normal speed limit. For example, if the speed limit is 100 km/h, exceeding 110 km/h would be considered speeding. When encountering a 60 km/h speed limit sign, you must slow down and proceed safely. According to the latest traffic safety laws, vehicles that do not exceed the normal speed limit will not be penalized, but safety must be ensured. If an accident occurs due to excessive speed, the driver may bear certain responsibilities.
Was this review help?
19
4
Share
More Forum Discussions

How to Maintain a Car in General?

General car maintenance includes the following: 1. Tire Maintenance: Tire care is crucial as the tires and rims are the most prone to dirt. Before cleaning the tires, prepare a long-handled brush. Avoid using the brush on chrome-plated mirror surfaces to prevent noticeable scratches. If the tires are not too dirty, general cleaning agents can be used. For heavily soiled tires, purchase professional cleaning agents. 2. Car Paint Maintenance: The effect of paint sealing typically lasts between 3 months to half a year, while coating lasts over half a year. It is recommended to reseal or recoat periodically to reduce the frequency of car washes. Avoid waxing and polishing the vehicle as much as possible. Promptly remove corrosive substances like bird droppings. Park the car in a shaded area to avoid prolonged sun exposure, especially for white cars. Avoid wiping the car surface directly with a duster or dry cloth. Instead, rinse off dust with water and then wipe dry with a clean, absorbent cloth. Do not let the car air dry naturally after rinsing. 3. Interior Maintenance: Regularly visit a 4S shop for maintenance of carpets, shoe marks on the lower part of inner door panels, dashboard, and roof. Strictly follow the three-step process of dust removal, cleaning, and maintenance to thoroughly clean and maintain the dashboard, roof, seats, floor mats, and inner door panels. 4. Check Engine Oil Level: Use the dipstick to check the oil level. If the level is between the F and L marks, it is within the normal range. If it is below L, add the specified type of engine oil. After adding oil, the level should ideally not exceed the F mark.
14
3
Share

What is the model number of car key batteries?

Car key battery models: CR2032, CR2025, CR2016H, CR1632H, CR1620H, CR1616H, CR2430H, CR2450H First remove the internal key: First, take out the internal mechanical key. Pry along the housing: Then use a pry tool or pry bar to pry along the gap of the car key housing. Separate the housing: After completely prying open the key housing, you can separate the housing. Replace the battery: At this point, you can see the chip and battery inside the remote key, and replace it with a battery of the same model.
5
2
Share

What does Nissan fault code U1001 mean?

Nissan fault code U1001 indicates a communication failure between various control modules or a malfunction in the engine compartment relay control unit. A detailed inspection and repair should be conducted at a 4S store or auto repair shop. Precautions for automotive fault diagnosis are as follows: 1. Diagnostic conditions: Diagnosis, testing, and troubleshooting must be performed under absolutely safe conditions. When using specialized diagnostic equipment, it is not advisable to operate alone. 2. Avoid disassembly: During automotive fault diagnosis, unnecessary disassembly of parts should be avoided to prevent new faults or damage. 3. Fault testing: Avoid prolonged or repeated testing of faults that may harm the vehicle's assemblies or components, as this could exacerbate the issue and lead to greater losses.
10
1
Share

How Many Years Can a New Car Be Driven?

Generally, a car can be driven for up to 20 years. In China, private cars that have been in operation for 15 years require inspection every 6 months, twice a year, until they fail the inspection. Cars that have traveled 600,000 kilometers are unconditionally scrapped. Taxis can only be used for 8 years, small trucks for 12 years, and the longest service life is for large and medium-sized trucks, which can be used for 15 years. Below is an introduction to the annual inspection requirements for vehicles: 1. Passenger transport vehicles: inspected once a year within 5 years; after 5 years, inspected every 6 months; 2. Freight vehicles and large and medium-sized non-passenger transport vehicles: inspected once a year within 10 years; after 10 years, inspected every 6 months; 3. Small and micro non-passenger transport vehicles: inspected once every 2 years within 6 years; after 6 years, inspected once a year; after 15 years, inspected every 6 months; 4. Motorcycles: inspected once every 2 years within 4 years; after 4 years, inspected once a year; 5. Tractors and other motor vehicles: inspected once a year. If an operational motor vehicle passes the safety technical inspection within the specified inspection period, it does not need to undergo repeated safety technical inspections; 6. Vehicles exceeding the scrapping age: cannot be transferred (sold or bought), but can continue to be used. For transactions, the vehicle owner can first obtain the vehicle's scrapping certificate (deregistering the vehicle's file) from the vehicle management office, and then proceed with the transaction.
14
3
Share

Can a car be equipped with front radar?

Car can be equipped with front parking radar. To eliminate the front blind spot, this can be achieved by installing front parking radar. Introduction: Automotive radar, as the name suggests, is radar used for cars or other ground motor vehicles. Therefore, it includes various radars based on different technologies (such as laser, ultrasonic, microwave) with different functions. Collision avoidance radar: This type of radar can measure dangerous obstacles on the road ahead of the vehicle that may cause collisions based on the current direction and speed of the vehicle. Therefore, it is suitable for situations with low atmospheric visibility and poor actual judgment (too short distance, too high speed).
17
4
Share

What is the wading depth of the Model X?

The maximum wading depth of the Model X is 137mm. The wading depth of the Model X is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Model X is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake. Based on the passage of vehicles ahead, assess the underwater road conditions and choose the best entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration. On roads prone to waterlogging, observe warning water level markers, trees, or other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly. Instead, choose an alternative route.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.