···
Log in / Register

Reasons for the Muffled Sound When Pressing the Accelerator Hard in Roewe 350

6Answers
DeCody
07/29/2025, 06:05:50 PM

Roewe 350 produces a muffled sound when the accelerator is pressed hard due to engine friction. Below is an introduction to Roewe vehicles: 1. Roewe: The Roewe 350 is a compact sedan positioned in the A-segment market, launched by SAIC Motor following previous models. It is also the first family car from Roewe to incorporate 3G technology. 2. Powertrain: Compared to the older 350 model, the 2014 Roewe 350 underwent technical upgrades in fuel economy. Through the application of new technologies, improvements were made to the chassis, engine, and transmission, reducing fuel consumption to just 6.9L, a 12% decrease from the older 350 model. The 2014 350 transmission added Tiptronic technology, offering four driving modes: D, S, M, and W. 3. Exterior Design: Based on the sporty design of the Roewe N1 concept car, the Roewe 350 features a globalized styling. As the first compact car in the Roewe family, it inherits some design genes from its larger siblings, the 550 and 750.

Was this review help?
103
Share
LaEverly
08/15/2025, 06:08:56 PM

When my Roewe 350 makes a muffled noise upon deep throttle, I think the first step is to check the exhaust system, such as whether the exhaust pipe or muffler is loose or leaking, as this sound often comes from a low growl in the chassis. Secondly, a clogged intake pipe or air filter in the engine can also cause this muffled noise, as restricted airflow makes the engine work harder. Additionally, insufficient fuel pump pressure or poor fuel line flow can lead to abnormal noise when the throttle is pressed, as the fuel supply can't keep up with the engine speed. Transmission components, such as worn clutch plates, can also cause muffled noises under heavy throttle due to discontinuous power transfer. If this persists for a long time, it may even damage internal engine components. Therefore, I recommend regular maintenance, cleaning the filters, and checking the exhaust and fuel lines to prevent major repairs by addressing issues early.

Was this review help?
8
Share
Expand All
OSawyer
10/17/2025, 03:34:14 AM

A muffled sound when heavily accelerating the Roewe 350 is quite common, and my friend's car experienced this issue. After disassembling and inspecting, he found that the exhaust system joint was loose, and tightening it resolved the noise. Additionally, carbon buildup in fuel injectors or a dirty fuel filter in the fuel system can also produce low-pitched noises during acceleration, as this affects the combustion efficiency of the air-fuel mixture. If the intake pipe is aged or cracked, air leaks can cause the engine sound to become muffled. Although rare, engine issues like valve or piston ring problems might produce noises at high speeds. It's recommended for owners to perform simple self-checks: listen to the sound's location, whether it's from the front or rear; if the muffled sound persists, promptly visit a repair shop to use a diagnostic scanner to check the data stream and identify the root cause to avoid unexpected breakdowns.

Was this review help?
11
Share
Expand All
CamilleLee
11/30/2025, 03:17:59 AM

The dull noise when stepping on the accelerator of the Roewe 350 can stem from various causes, including exhaust pipe leaks causing low-frequency roaring, clogged air filters leading to insufficient air intake, inefficient fuel pumps resulting in unstable supply, or clutch slippage in the drivetrain causing friction noise. These symptoms typically become prominent during rapid acceleration, often due to component aging or inadequate maintenance. Initial diagnosis can involve visual inspection of the exhaust and chassis for any damage or holes, and testing whether the fuel line pressure meets standards. If ignored, it may lead to increased fuel consumption or engine damage. It's essential to accurately diagnose and repair based on the noise characteristics using professional tools.

Was this review help?
13
Share
Expand All
CharlotteFitz
01/20/2026, 09:53:35 PM

When encountering a muffled sound when pressing the accelerator heavily in a Roewe 350, I believe safety is the top priority, as this noise indicates potential faults that could suddenly worsen and lead to accidents. Common causes include exhaust system leaks or fuel pump defects, especially in older vehicles. A clogged intake tract can also produce a muffled sound during acceleration, affecting power output. I recommend first test-driving at different speeds to observe the frequency—if the sound occurs only at high RPMs, consider exhaust issues; if accompanied by shaking, fuel system failure is highly likely. Visit a repair shop early for a comprehensive inspection, replace aging components, and avoid delaying until severe damage requires costly repairs to the engine's core parts.

Was this review help?
20
Share
Expand All
BraydenLynn
04/16/2026, 10:25:08 PM

Analysis of the muffled sound when accelerating in my Roewe 350 reveals common causes including corroded and leaking exhaust tailpipe, a dirty air filter obstructing airflow, or a clogged fuel filter leading to insufficient fuel supply. This issue often becomes more noticeable during aggressive driving, as rapid RPM increases expose underlying problems. Additionally, worn transmission clutch components can transmit muffled noises. For prevention, clean filters and inspect seals during each maintenance service to ensure smooth fuel delivery. If the sound persists, test driving under varying conditions to pinpoint the cause, and replace critical components if necessary to maintain stable performance and prevent subsequent chain failures.

Was this review help?
6
Share
Expand All
More Q&A

What is the Difference Between National 5 and National 6 Engine Standards?

The differences between National 5 and National 6 engine standards are: 1. Different limits: The National 5 standard allows carbon monoxide emissions of 1000 mg per kilometer, while the National 6 standard reduces this to 700 mg per kilometer. 2. Different emission standards: National 5 reduces nitrogen oxide emissions from light vehicles by 25% compared to National 4, whereas National 6 reduces particulate emissions by 40% compared to National 5. A car engine is the power-generating device of a vehicle, often referred to as the heart of the car, determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric motors for electric vehicles, and hybrid powertrains, among others.
118
Share

How to Replace a Lost Car License Plate?

The method to replace a lost car license plate is: 1. The vehicle owner needs to bring relevant documents to the vehicle management office for replacement. After registration and review, proceed to the payment window to pay the fee. Once the new license plate is made, it can be collected; 2. Alternatively, you can log in to the traffic management website to apply for a replacement license plate online. License plates, commonly known as tags, refer to vehicle registration plates, which are used to number and register vehicle information. They are plates hung on the front and rear of the vehicle, typically made of aluminum, iron, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information. The main purpose of a license plate is to identify the vehicle's region of registration and to trace the vehicle's owner and registration details through the plate number.
104
Share

How often should the Outlander throttle body be cleaned?

The Outlander throttle body generally needs to be cleaned every 15,000 to 20,000 kilometers. The main function of the throttle body is to control the air intake based on the engine's load. The frequency of cleaning depends on various factors, such as the vehicle's operating environment and the control method of the fuel injection system. If the vehicle operates in a highly polluted environment (primarily referring to inhalable particles), impurities can quickly accumulate on the throttle body. Over time, this can affect the engine's air intake, necessitating cleaning. Some Japanese engine control systems traditionally rely on measuring air flow to calculate fuel injection and ignition timing, so they require highly accurate air flow measurements. Minor blockages can cause abnormal engine operation. However, for some American engines that do not use air flow as the basis for calculations, the impact is less significant.
110
Share

Where is the cabin air filter located in the Volvo S80L?

Volvo S80L's cabin air filter is located under the dashboard on the passenger side, next to the central computer panel. Remove the glove compartment on the right side of the driver's cabin to see a white distribution board. Turn off the ignition switch, unplug all connectors to remove the distribution board. There's also a black connector on the left side - disconnect it to reveal the heater box with an approximately 15cm long cover. Remove this cover to access the cabin air filter. The Volvo S80L extended version is a new model specially designed by Volvo Cars for Chinese luxury car users, with body dimensions of 4991mm in length, 1861mm in width, and 1490mm in height.
111
Share

Where is the battery located in the BMW X3?

The battery of the BMW X3 is located under the seat. The battery, also known as an accumulator, works by converting chemical energy into electrical energy. The BMW X3 is equipped with an xDrive30i engine, paired with a 6-speed automatic transmission, and features a diaphragm clutch and a central differential system. The BMW X3 is an SUV model with body dimensions of 4565mm in length, 1853mm in width, and 1674mm in height, with a wheelbase of 2825mm. It accelerates from 0 to 100 km/h in 5.7 seconds and comes with safety features such as driver and passenger airbags, engine immobilizer, seatbelt reminder, ABS anti-lock braking system, brake force distribution, brake assist, traction control, and electronic stability control.
118
Share

How does the throttle control speed?

The throttle controls speed by regulating the amount of fuel entering the cylinders, thereby controlling the quantity of gasoline involved in combustion. This, in turn, governs the energy produced, which affects the engine's rotational speed and ultimately the vehicle's speed. The throttle is an operating device that manages the engine's power (thrust). In piston aircraft engines, the throttle adjusts the carburetor's throttle valve opening to control the cylinder's filling volume, determining the engine's output power. For gas turbine engines, the throttle regulates the metered fuel flow through the fuel controller, dictating the thrust generated by the engine. The throttle position is manipulated by the pilot via the throttle lever in the cockpit, transmitting commands through control system components such as pushrods, rocker arms, torque tubes, cables, pulleys, and quadrant sectors to the carburetor or fuel controller on the engine.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.