···
Log in / Register

Is the 2013 car exempt from inspection this year?

6Answers
DeLucas
08/26/2025, 10:06:03 PM

There are two scenarios: 1. If the vehicle was inspected last year (2020), then it is exempt from inspection this year (2021). Starting from 2022, it will require an annual on-site inspection. 2. If the vehicle was exempt from inspection last year (2020), then it must undergo an on-site inspection this year (2021). It will be exempt in 2022, and starting from 2023, it will require an annual on-site inspection. Below is relevant information about vehicle inspections: 1. Vehicle Annual Inspection: The vehicle annual inspection is a yearly examination conducted for vehicles that have already obtained official license plates and registration certificates, in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to check the main technical conditions of the vehicle, encourage better maintenance, ensure the vehicle remains in good condition, and guarantee driving safety. 2. Penalty Regulations: (1) According to traffic laws, vehicles that have not undergone annual inspections are not qualified to be driven on the road. If caught driving such a vehicle, the penalty is a 3-point deduction and a fine of 200 RMB. (2) For vehicles that fail to undergo the annual inspection on time, all resulting traffic accidents will be the sole or primary responsibility of the owner. The insurance company will not bear any responsibility. Since the insurance policy specifies that vehicles with expired inspections are excluded from coverage, any accidents involving such vehicles will be entirely the owner's responsibility, and the insurance company has the right to refuse compensation.

Was this review help?
120
Share
JaydenLee
09/08/2025, 04:52:36 AM

I drive a 2011 model year car myself. From 2013 to 2023, it's exactly 10 years. According to national regulations, private passenger vehicles are exempt from on-site inspections for the first 6 years and only need to collect the inspection decal. However, from year 6 to 10, annual inspections at testing stations are required. The exemption only applies to those first 6 years, so your vehicle isn't exempt this year and must undergo mandatory checks for brakes, lights, emissions and other items on time.

Regular maintenance is also crucial - timely replacement of spark plugs, brake pads, etc. makes it easier to pass inspection and avoids repair hassles if problems are found. I recommend checking your local inspection station locations and booking an appointment early. Weekends tend to be crowded with long queues, so going on weekdays saves time.

Was this review help?
17
Share
Expand All
DelRowan
10/22/2025, 10:12:23 PM

For those who frequently follow automotive policies, a car from 2013 is now 10 years old in 2023. According to standards, the exemption from inspection only applies to new cars for the first 6 years, after which an annual on-site inspection is required, including checks on the emission safety system. If you miss the inspection or take a chance by not inspecting, the police may impose fines, deduct points, or even impound the vehicle. It's best to make an appointment a week in advance using an app like Traffic Management 12123 for a hassle-free process, and bring your vehicle license and compulsory insurance policy. Regularly replacing items like the air filter and engine oil can make the annual inspection process smoother and faster. Don't wait until the last day to rush through it.

Was this review help?
18
Share
Expand All
StHayden
12/05/2025, 09:34:04 PM

For driving safety, regular annual inspections are mandatory for all vehicles. Cars from 2013 to the current year 2023 are not exempt from inspection. Vehicles over 10 years old must be inspected annually to ensure proper functioning of brakes and turn signals. Imagine how dangerous it could be if problems occur on the road, especially when driving on highways at night. It's advisable to get timely inspections without cutting corners to save money or effort. Additionally, routine maintenance like tire replacement and oil checks can prevent minor malfunctions. During inspections, don't forget to verify that exhaust emissions meet national environmental standards.

Was this review help?
5
Share
Expand All
Ida
01/25/2026, 10:53:20 PM

From a cost and time-saving perspective, the 2013 car is not exempt from inspection this year and must undergo an annual check at an official testing station, especially since it's been 10 years with increased wear. Booking via mobile avoids queues, and the inspection takes about half an hour, costing around 100-200 yuan, much cheaper than repairs. Just bring your driver's license and insurance documents to get it done. Cleaning the throttle or replacing the air filter beforehand can make the inspection smoother. Remember not to miss the annual deadline to avoid fines and ensure hassle-free travel.

Was this review help?
9
Share
Expand All
Mabel
04/21/2026, 04:21:02 AM

I've noticed changes in vehicle inspection policies over the years, such as simplified procedures. However, a 2013 car in 2023 is not exempt from inspection. The standard stipulates that vehicles are exempt from on-site inspections within 6 years, but beyond that, they must undergo annual inspections. Actually, new energy vehicles enjoy preferential policies, while fuel vehicles do not have exemptions. It's advisable to follow local public accounts, such as transportation channels, for quick updates in case of policy adjustments. Timely inspections ensure safety and compliance, and regular maintenance checks on small components can save a lot of hassle.

Was this review help?
14
Share
Expand All
More Q&A

Is the Santana compliant with China 6a or China 6b emission standards?

The Santana meets the China 6b emission standard. The newly upgraded model has launched four variants that comply with the China 6b emission requirements, fulfilling the stringent emission regulations. The Santana is a compact sedan produced by SAIC Volkswagen, with body dimensions of 4546mm in length, 1710mm in width, and 1427mm in height, along with a wheelbase of 2458mm. The redesigned Santana retains Volkswagen's signature design language, maintaining consistent exterior and interior styling. The front fascia continues to feature a horizontal slat grille accented with chrome trim. Under the hood, the vehicle is powered by a 1.5L naturally aspirated engine delivering maximum power of 82kW and peak torque of 145Nm. Transmission options include a 5-speed manual gearbox and a 6-speed automatic transmission.
119
Share

How to Choose a Car Windshield?

Methods for choosing a car windshield: 1. You must select glass that matches the car, as this component is not universal; 2. It is best to choose original equipment manufacturer (OEM) glass. If opting for aftermarket glass, ensure it has a 3C certification, as safety is paramount. There are three main types of automotive glass: laminated glass, tempered glass, and zone-tempered glass. Laminated glass involves bonding a transparent adhesive plastic film between two or three layers of glass, combining the toughness of plastic with the hardness of glass to enhance its resistance to breakage. Tempered glass is produced by quenching ordinary glass to create internal stresses, thereby strengthening the glass. When impacted and broken, tempered glass shatters into small, blunt-edged fragments, reducing the risk of injury to passengers.
110
Share

What Causes the Engine Warning Light to Illuminate in the Lavida?

The engine warning light in the Lavida may illuminate due to the following 7 main reasons: Sensor Malfunction: The sensors involved include those for coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or Oil Quality Issues: Failure to use the fuel or engine oil as specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor Combustion of Air-Fuel Mixture: Poor combustion can result in engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a caution. Issues such as faulty spark plugs, defective ignition coils, fuel pump failure, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Turbocharger Problems: Issues with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common problem is a damaged turbocharger, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake Problems: If the vehicle's intake system is compromised, it may lead to blocked engine pipes, and in severe cases, the engine warning light will illuminate. A dirty or uncleaned air filter can cause intake problems. Exhaust Problems: Exhaust system faults can also cause the engine warning light to illuminate. Common causes include faulty rear oxygen sensors, catalytic converter issues, or problems with the exhaust camshaft and bearings. The catalytic converter is particularly prone to failure due to the use of leaded gasoline, lead- or silicon-containing lubricant additives, physical damage, or fuel system malfunctions. Anti-Theft System Malfunction: If the vehicle's electronic anti-theft system fails or if there is a mismatch between the anti-theft controller and the engine ECU, the anti-theft system may prevent the engine from operating correctly, accompanied by the illumination of the engine warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for symptoms like shaking or black smoke. If present, avoid restarting the engine. Note: Never restart the engine if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will enter self-check mode upon powering up. Wait 5-10 seconds to see if the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.
108
Share

What type of suspension does the Vision use?

The Vision uses a MacPherson independent suspension for the front and a torsion beam non-independent suspension for the rear. There are two common types of suspensions in vehicles: independent suspension and non-independent suspension. Common independent suspensions include MacPherson suspension, multi-link suspension, double-wishbone suspension, and double A-arm suspension. Non-independent suspensions include torsion beam suspension and solid axle suspension. In an independent suspension, there is no connection between the two wheels on the same axle, so the movement of the two wheels on the same axle does not interfere with each other. This type of suspension improves wheel contact with the ground, enhancing handling and comfort. In contrast, a non-independent suspension has a connection between the two wheels on the same axle, resulting in mutual interference in their movement. The comfort and handling of non-independent suspensions are inferior to those of independent suspensions.
101
Share

What Causes Intermittent Shaking When Idling in Park?

Intermittent shaking when idling in park can be caused by: 1. Unstable oil pressure. If you've already cleaned the engine carbon deposits, throttle body, replaced oil pads and spark plugs, but the vehicle still shakes at idle, it's recommended to visit a 4S shop to check the fuel supply pressure and intake pressure sensor; 2. Aging engine components. Worn engine mounts may cause vehicle shaking. If these parts fail, the vibrations will transmit to the steering wheel and cabin; 3. Excessive dirt in the engine or carbon buildup in fuel injectors. When carbon deposits are excessive, gasoline sprayed by cold-start injectors gets largely absorbed by carbon deposits. After starting, the gasoline adsorbed on carbon deposits gets sucked into the cylinders by engine vacuum for combustion, enriching the air-fuel mixture. This results in fluctuating lean/rich combustible mixtures, causing shaking.
101
Share

What is the function of the button on the left side of the BMW gear lever?

The button on the left side of the BMW gear lever is the multimedia option selection and volume adjustment button, used during media playback and unrelated to the vehicle's driving system. Operation method: Depress the brake pedal of the BMW 5 Series, press the one-touch start button of the BMW 5 Series, the instrument panel of the BMW 5 Series lights up, and the vehicle's power is turned on. Press the knob up, down, left, or right to adjust multimedia options. Rotate it left to decrease the volume and right to increase the volume. Location of multimedia option selection and volume adjustment buttons in other vehicles: In Honda vehicles, the multimedia option selection and volume adjustment buttons are located on the steering wheel.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.