···
Log in / Register

Is it safe to leave the car at the 4S store after purchase?

6Answers
McSpencer
08/29/2025, 11:25:58 PM

It is safe to leave the car at the 4S store, and there is no need to worry about the 4S store secretly replacing the car parts. Quality Assurance: The 4S store does not stop providing quality assurance for the vehicle after the sale. The 4S store hopes that subsequent maintenance will be carried out in the store after the car is delivered, so for customer satisfaction, they would not do such things, as it would directly affect long-term income. Cameras: Nowadays, 4S stores install cameras at every workstation, and the entire process of maintenance and replacement is fully recorded. If an employee replaces a part, the surveillance footage can be directly reviewed. Moreover, commonly used parts at 4S stores are rarely out of stock, and even if they are, they can be taken from inventory cars for use.

Was this review help?
120
Share
AliviaRose
09/11/2025, 03:29:48 AM

After picking up my new car from the 4S dealership last time, I had to leave town for a business trip unexpectedly, so I left the car with them for three days. It felt quite reliable. The dealership has 24-hour surveillance and security patrols, and before handing over the car, they even sealed the doors to prevent any movement. However, I made sure to specifically instruct them not to use my car for test drives or washing, as the new paint is delicate. It’s best to sign a written storage agreement, clearly stating the storage period and liability clauses. Some 4S dealerships have open-air parking lots, which can be risky during hailstorms, so I always check the weather forecast in advance. Overall, it’s much safer than roadside parking—at least they’d take responsibility even if a screw went missing.

Was this review help?
1
Share
Expand All
DavidLynn
10/25/2025, 04:21:39 AM

I think storing cars at 4S dealerships is quite safe, as their premises are usually equipped with fences and surveillance cameras. Last week when I bought a car and the paperwork wasn't completed, the salesperson proactively suggested parking it in their repair workshop, which is much better than leaving it exposed to wind and sun outside. Remember to take valuables with you—a friend once left a gold chain in the glove box and couldn't find it later. Their employees lock the workshop doors before leaving each day, and the keys are managed by designated personnel. However, don't leave your car there for too long; storage fees may apply if it exceeds a week, and the battery might drain. Storing it for two or three days is completely fine, and I've done this five or six times myself.

Was this review help?
10
Share
Expand All
DeParker
12/08/2025, 03:45:17 AM

The safety level of storing cars at 4S dealerships is quite high, after all, it's their bread and butter. Last year when I picked up my car, it coincided with a pandemic lockdown, and the car stayed at the dealership for half a month. They had staff on duty patrolling the premises daily and regularly started the engine to prevent the battery from dying. However, it's important to check for any scratches on the body and thoroughly inspect the tires and paintwork when picking up the car. Nowadays, reputable dealerships are equipped with electronic fence systems that trigger alarms for any abnormal vehicle movement. The only thing to watch out for is not to park next to the body repair and paint booths, as overspray from painting might get on the new car. Taking a photo of the odometer and fuel gauge when leaving the car is the safest bet.

Was this review help?
11
Share
Expand All
Greg
01/28/2026, 10:04:26 PM

Leaving a newly purchased car at a 4S dealership is actually safer than parking it at a shopping mall, as professional facilities take better care. When I picked up my car last month, I had urgent family matters on the delivery day and left it overnight at the dealership. Their workshop has a flat floor to prevent undercarriage scratches, and night-shift technicians cordon off the area. Just remember to unplug the dashcam to avoid draining the battery. Also, avoid holidays when it’s crowded and chaotic. Storing it on regular weekdays carries almost zero risk—if anything goes wrong, the dealership is accountable. Now I always record a walkaround video as proof before leaving my car there.

Was this review help?
2
Share
Expand All
DiMalachi
04/24/2026, 02:38:28 AM

Based on experience, 4S dealerships are generally reliable for storing new cars, but it depends on the specific parking location. I once found my car parked next to test-drive vehicles, which made me uneasy since test drivers tend to drive aggressively. It's best to request parking in the customer-exclusive area where there's full surveillance coverage. In summer, avoid direct sunlight as high temperatures can accelerate interior aging. Remember to lock the OBD port to prevent unauthorized programming. Reputable dealerships now have property insurance, so there are channels for compensation if issues arise. For storage exceeding three days, disconnecting the negative battery terminal is a well-known hassle-saving method among experienced drivers.

Was this review help?
13
Share
Expand All
More Q&A

How to turn off the daytime running lights on the Geely Vision X3?

The method to turn off the daytime running lights on the Geely Vision X3 is: Insert the car key without turning it, pull the turn signal lever upward while turning left, then rotate the key two clicks to power on the dashboard. Wait until you hear an alarm sound, then release the turn signal lever. At this point, the daytime running lights will be turned off. The Geely Vision X3 is an A0-class compact SUV with body dimensions of 4005mm in length, 1760mm in width, and 1575mm in height, and a wheelbase of 2480mm. In terms of active safety, the vehicle is equipped with a 39-meter 100km braking distance, independent four-wheel tire pressure monitoring, and Bosch 9.1 version ESP electronic stability program.
102
Share

Should You Shift Gears or Release the Handbrake First When Driving an Automatic Transmission Car?

When driving an automatic transmission car, you should shift gears first. The starting procedure is as follows: 1. Insert the key, shift to P (Park), press the brake, shift to N (Neutral), and start the engine; 2. After shifting from N to D (Drive), release the handbrake and foot brake to start moving. The parking procedure for an automatic transmission car is: 1. Slow down and press the brake, shift to N and turn off the engine; 2. Pull the handbrake, release the foot brake, and once the car is completely stationary, shift to P. Important precautions when driving an automatic transmission car include: 1. Do not coast in neutral; 2. Do not shift gears before the car comes to a complete stop; 3. Warm up the car properly; 4. Shift to P and apply the handbrake when parking for an extended period. An automatic transmission refers to a system where the driver does not need to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions.
103
Share

How to Remove the Tiida Dashboard?

The method for removing the Tiida dashboard is as follows: 1. Gently unclip the retaining ring and remove the four screws on the dashboard; 2. Take off the rear cover; 3. The dashboard circuit board will then be visible, completing the removal process. The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4250mm in length, 1695mm in width, and 1535mm in height. In terms of exterior design, the Tiida's rear hatchback is a standout feature, with the combination of strip-shaped taillights on both sides of the rear window and the high-position spoiler giving it a lively appearance. The front features a horizontal grille, new wheel designs, polygonal rear quarter windows, and an added rear spoiler, all of which enhance its sporty appeal.
113
Share

Where is the Ji G license plate from?

Ji G license plates are from Baicheng City, Jilin Province. The license plate codes for different regions in Jilin Province are as follows: Ji A for Changchun City, Ji B for Jilin City, Ji C for Siping City, Ji D for Liaoyuan City, Ji E for Tonghua City, Ji F for Baishan City, Ji H for Yanbian Korean Autonomous Prefecture, and Ji J for Songyuan City. License plates, commonly known as vehicle tags, refer to the plates mounted on the front and rear of vehicles, made of materials such as aluminum, sheet metal, plastic, or paper. The installation method for license plate screws is: 1. Align the license plate with the fixing points on the vehicle and position it correctly; 2. Insert the screw rods into the holes of the vehicle's fixing points and secure the screws using a flat-head screwdriver; 3. Attach the four screw caps in sequence.
102
Share

What is the license plate prefix for Lincang?

Lincang's license plate prefix is Yun S. The Yun S license plate covers areas including Cangyuan, Gengma, Shuangjiang, Fengqing, Yongde, Yunxian, Zhenkang, and Linxiang District. For services such as vehicle registration, annual inspection, or handling traffic violations, you can visit the Lincang Vehicle Management Office. Below is some information about license plates: 1. Classification of license plates. A vehicle license plate is an identification number for a vehicle, much like an ID number for a person. White plates represent military or police vehicles, such as NS12345, which indicates a Nanjing Military Region plate. Su A1234 Police represents a Nanjing Public Security Bureau vehicle. Blue plates are for ordinary passenger cars. Yellow plates are for ordinary large vehicles. Black plates are for foreign investors in China or important figures. 2. Color classification of vehicle license plates: Blue -- for small passenger cars; Yellow -- for large vehicles, agricultural vehicles, training vehicles, and motorcycles; White -- for special vehicles; Black -- for vehicles brought into China by foreign investors or foreign enterprises.
104
Share

How to Remove the Steering Wheel Airbag in a Fit?

To remove the steering wheel airbag in a Fit, follow these steps: 1. Release the steering wheel fixing lever; 2. Pull the steering wheel to the side; 3. Start from the inner side of the steering column cover where there is a dust cover, lift the upper cover upwards to remove it; 4. Release the clips and remove the lower cover; 5. Use a T20 tool to release the airbag hooks on both sides, then pull the airbag outward. The Fit is a compact car. Taking the 2021 Fit CVT Trend Edition as an example, its body dimensions are: length 4109mm, width 1694mm, height 1537mm, with a wheelbase of 2530mm. The 2021 Fit CVT Trend Edition is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, with a maximum power of 96kW and a maximum torque of 155Nm.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.