···
Log in / Register

Is it necessary to use 98 octane gasoline for the BMW 3 Series?

1Answers
EleanorLynn
08/30/2025, 11:28:08 PM

The BMW 3 Series model is recommended to use 95 octane or higher premium unleaded gasoline when refueling. If 92 octane standard gasoline is used, the power output will decrease. In such cases, it is advisable to drive at medium RPM with lower engine load. Premium gasoline should be refueled as soon as possible. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), with a density of approximately 0.91×10³ (kg/m³), serves to lubricate and reduce friction in the engine, assist in cooling, provide sealing against leaks, prevent rust and corrosion, and act as a shock absorber. It is often referred to as the 'blood' of a car. 2. Composition: Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance, imparting new characteristics. Additives are an essential part of lubricating oil.

Was this review help?
103
Share
More Q&A

Where is the auxiliary battery of BYD Song located?

BYD Song's auxiliary battery is located on the right side of the engine compartment. Precautions for using car batteries: When the ammeter pointer indicates insufficient power, charge the battery promptly. When the electrolyte level is low, replenish it with distilled water or a dedicated replenishing solution. Continuously using the starter when starting the car can cause the battery to be damaged due to excessive discharge. About BYD Song: BYD Song is a compact SUV under BYD. The design outline of the Song Classic version remains consistent with the previous model. The family-style "Dragon Face" design language, with dragon elements at its core, starts from the "Song" logo in the middle of the grille and extends to both sides with chrome strips forming "dragon whiskers." The grille resembles a "dragon mouth," combining to form a "dragon face" with an open mouth. In terms of power, the new car is equipped with a 1.5T four-cylinder turbocharged engine, with a maximum power of 118kW (160PS)/5200rpm and a peak torque of 245Nm/1600-4000rpm, paired with a 6-speed dual-clutch or 6-speed manual transmission, meeting the China VI B emission standard.
119
Share

What is the fuel tank capacity of the Subaru Outback in liters?

The currently available Subaru Outback has 6 models, all with a fuel tank capacity of 63 liters. The vehicle is equipped with a 2.5L naturally aspirated engine and an 8-speed continuously variable transmission (CVT) across all models. All models feature a front-engine, four-wheel-drive configuration. Among vehicles in the same class, the BMW X2 2021 model has a fuel tank capacity of 61 liters, while the Enclave 2022 model has a capacity of 73 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by automakers is measured from the bottom of the tank to the safe fill level, with additional space remaining from the safe fill level to the tank opening. This extra space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle approaches E, it indicates low fuel, while nearing F signifies sufficient fuel.
120
Share

Why is there sometimes abnormal noise when shifting from first to second gear?

Here are the specific reasons for abnormal noise when shifting from first to second gear in a car: 1. Casing damage: The transmission casing and bearing seat holes have long-term wear and deformation. The noise is loudest when engaging low gears, gradually decreases when shifting to higher gears, and is minimal in direct drive. 2. Due to individual gear surface breakage, causing impact during meshing. When engaging this gear, strong impact and vibration occur, leading to resonance in the transmission casing. 3. Improper transmission assembly: Incorrect replacement of gears, needle bearings, or bushings in a certain gear of the transmission, or abnormal assembly clearance, resulting in poor gear meshing and abnormal noise during transmission in that gear.
113
Share

Is the MG5 fuel-efficient?

MG5 is fuel-efficient. 1.5L Power: The new MG5 offers two power options: a 1.5L naturally aspirated engine and a 1.5T turbocharged engine. The power of the 1.5T version is certainly no problem. Previously, it performed exceptionally well on the MG Pilot. On the smaller MG5, the 0-100 km/h acceleration time also reaches 8.5 seconds. This data is already very outstanding among peers and does justice to the MG5's 'sporty' appearance. Noise insulation: The new MG5 has excellent quietness. Even at 120 km/h, wind noise does not cause interference, but road noise is noticeable. The 'can' will lose to the four tires from Gup. After all, the four Michelin Primacy tires on the 1.5T model from the same company do not have this problem.
104
Share

What car brand has a leopard logo?

The car brand with a leopard logo is Jaguar. Here is more information about Jaguar: 1. Jaguar was founded in 1935 by Sir William Lyons. Jaguar entered the Chinese market in 2004 and currently sells products in three major categories in China: the TYPE series sports cars, the X series sports sedans, and the PACE series coupe SUVs. 2. The new Jaguar models are equipped with the Ingenium series engines, featuring a 2.0T version engine paired with an 8-speed automatic transmission. The overall exterior design follows the family-style design, with the front grille adopting an oval shape and a blackened finish, giving it a very sporty appearance.
104
Share

How to Turn on the Headlights of Lavida?

Lavida's headlight operation method: Adjust through the light control lever and rotary knob. Turn the light switch to the low beam position to turn on the low beams; push the car light lever forward to turn on the high beams, and pull it backward for a single high beam flash. The brightness of the lights can be controlled by adjusting the rotary knob positions. The following are maintenance methods for car headlights: 1. Regularly check the sealing of the headlights, and replace the sealing ring between the lens and reflector if it is damaged. 2. Clean the reflector regularly, and replace it if it turns black or the brightness decreases. 3. Regularly clean dust and stains on the bulbs.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.