···
Log in / Register

Is a six-year-old car subject to biennial inspection thereafter?

1Answers
DiBeckett
07/29/2025, 03:33:01 AM

Yes. Private cars that have been in use for 6 years will be subject to biennial inspections. Vehicles that have already passed the annual inspection need to undergo the inspection before the expiration date. The new regulations include 7 to 9-seater non-operational mini and micro passenger vehicles (excluding vans) within the 6-year exemption range. For non-operational mini and micro passenger vehicles (excluding vans) that have been in use for more than 6 years but less than 10 years, the inspection frequency is adjusted from once a year to once every two years. Below is relevant information about vehicle inspection: 1. Article 49 of the "Motor Vehicle Registration Regulations" states that the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. 2. Before applying, the owner must resolve all traffic violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption certificate, and motor vehicle safety technical inspection compliance certificate. The vehicle management office shall, within one day from the date of acceptance, confirm the motor vehicle, review the submitted certificates and documents, and issue the inspection compliance mark.

Was this review help?
104
Share
More Q&A

What are the reasons why motor vehicles are prone to skidding inside tunnels?

The reason why motor vehicles are prone to skidding inside tunnels is that the tunnel floor is relatively slippery. Precautions for driving in tunnels: It is necessary to appropriately reduce speed before entering the tunnel. Tunnel entrances usually have clear speed limit signs to remind drivers to slow down before entering. The lanes inside the tunnel are typically narrower than those outside, so reducing speed helps drivers accurately assess road conditions. At the same time, it is essential to turn on the low beam headlights. Due to the relatively dim lighting inside the tunnel, drivers may experience temporary "blindness," making it necessary to use low beam headlights to clearly see the road ahead. It is important to note that using high beam headlights inside the tunnel is strictly prohibited, as it is an extremely dangerous action. Requirements for driving in highway tunnels: Changing lanes or overtaking is prohibited inside tunnels. Due to the limited space and poor lighting conditions, lane changes and overtaking can easily disrupt the normal flow of other vehicles. Additionally, most tunnels are now equipped with comprehensive camera surveillance systems, and illegal lane changes will result in a 3-point penalty and a fine.
112
Share

How Long Can You Listen to Music After the Car Is Turned Off?

After the car is turned off, a 35Ah battery can play music for about 3 hours, while a 45Ah battery can last between 3 to 4 hours. Battery Capacity: The current battery capacity SOC (State of Charge) of the vehicle is equal to the remaining charge/usable capacity × 100%; however, these two values are generally measured indirectly through the ampere-hour integration method, which still has many errors. Moreover, as the battery degrades, these errors become increasingly significant. Power Battery: For power batteries, the discharge capability varies under different temperatures. For example, the usable capacity refers to the maximum charge (AH) that the battery can store in its current state. This value changes constantly, with the most obvious factor being aging. Over time, as the number of charge-discharge cycles increases, the usable capacity gradually decreases.
112
Share

Is It Advisable to Buy a Second-hand Car Without Transferring Ownership?

It is not advisable to buy a second-hand car without transferring ownership. If you only sign an agreement without transferring ownership when buying or selling a used car, the previous owner can still use the car as collateral, which may harm the interests of the subsequent owner. Definition of Ownership Transfer: Transferring ownership of a second-hand motorcycle, as the name implies, means changing the name of the vehicle's owner. It is an indispensable procedure in the process of buying and selling used vehicles. Not transferring ownership can cause inconvenience to both the buyer and the seller. Precautions for Ownership Transfer: According to Article 31 of the "Road Traffic Accident Handling Measures," if a motor vehicle driver is temporarily unable to compensate, the driver's employer or the owner of the motor vehicle is responsible for making the payment. If the ownership transfer is not completed, the owner remains the original owner, meaning that if someone else causes an accident, the original owner will be held liable. Moreover, if the property rights are not transferred to your name, disputes may easily arise in the future.
102
Share

What are the reasons for a car not responding when starting?

Reasons for no response when starting are as follows: Battery depletion: Battery depletion does not mean the battery is completely dead, but the voltage is insufficient to start the car. In this case, you need to jump-start the car or replace the battery. Spark plug damage: Damaged spark plugs in the engine are one of the reasons why the car won't start, as the spark plugs are needed to ignite the gasoline in the cylinders to get the engine running. Distributor circuit failure: The main circuit for starting is the distributor. If the distributor is damaged, it may also cause the car to fail to start. Starter damage: The starter is primarily responsible for turning the engine during ignition. If the starter is damaged, the car won't start.
106
Share

What does the sixth gear on a motorcycle mean?

Motorcycle sixth gear is the gear for speeds above 80 km/h. Motorcycle speed limits: The speed of motorcycles on highways must not exceed 80 kilometers per hour. Exceeding this limit will result in penalties from traffic police. Additionally, riding on highways without wearing a helmet will lead to being stopped and fined by traffic police, and carrying passengers on highways is strictly prohibited. Precautions for motorcycle riding: Avoid racing with cars, drive safely in accordance with traffic regulations, and yield to pedestrians. Do not follow other vehicles too closely; maintain an appropriate distance behind the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; overtaking from the right side or between two parallel vehicles is prohibited.
116
Share

What Causes the ABS Light to Illuminate in the Emgrand GS?

ABS light illumination can occur in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS speed sensor's sensing area is covered by mud, sludge, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the contaminants from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wires or poor contact in the ABS relay can lead to signal issues and system failure. Solution: Inspect wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical components are in use, the battery voltage may drop below 10.5V. As engine speed increases and voltage rises, the ABS light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor wire contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, loose wiring connections in the valve body, or ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, clean contact surfaces if necessary, check for enlarged connector gaps, and replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between rear and front wheel speed signals during high-speed driving, or incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or internal contact issues in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the pedal to reset its position. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the anti-lock braking system, which can lead to wheel lock-up during emergency braking, causing loss of control and skidding. This poses significant safety risks as it may prevent the driver from slowing down or adjusting the vehicle's trajectory.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.