···
Log in / Register

How to use the headlight delay-off function on Changan CS55?

6Answers
KennedyFitz
09/05/2025, 10:21:24 PM

Usage of the headlight delay-off function on Changan CS55: After turning off the headlights and removing the key upon engine shutdown, immediately flick the light stalk twice consecutively to activate the headlight delay-off function. This feature is also known as the 'follow-me-home' function, which essentially keeps the headlights on for a period after vehicle shutdown to provide external illumination for the driver. The Changan CS55 has body dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, with a wheelbase of 2650mm. It is equipped with a 1.5T turbocharged engine delivering a maximum power of 115kW and peak torque of 225Nm, paired with an Aisin 6-speed automatic transmission.

Was this review help?
109
Share
LaMartin
09/17/2025, 10:25:48 PM

After using the Changan CS55 for so long, the headlight delay-off feature is incredibly practical! When you turn off the engine and need some light after getting out, the operation is super simple: right after turning off the ignition, pull the light stalk on the left side of the steering wheel toward you (just like flashing the high beams normally), and you’ll hear a prompt sound immediately, indicating the setup is successful. Then, lock the car and walk away—the headlights will stay on for 30 seconds to light your way home. The duration can be adjusted in the car’s infotainment menu, ranging from a minimum of 30 seconds to a maximum of 120 seconds. Note that the operation must be completed within 5 seconds after turning off the engine, or it won’t work. This feature is especially handy on rainy days when the road is slippery.

Was this review help?
12
Share
Expand All
DelGemma
10/31/2025, 10:53:01 PM

Hey, we CS55 owners call this feature 'Follow Me Home'. The key is to act quickly after turning off the engine: immediately power off, then quickly flick the light stalk with your left hand towards your chest—similar to flashing high beams when passing another vehicle. A beep indicates successful activation, and you can directly lock and leave as the headlights will stay on for about 60 seconds. The duration can be adjusted in the infotainment system; I usually set it to 90 seconds, just enough to reach my apartment door. Also tested—it works with auto headlights on, but fails if fog lights are active.

Was this review help?
15
Share
Expand All
WalkerFitz
12/14/2025, 10:01:32 PM

The operation is actually done in three simple steps: 1) Turn off the power immediately after parking and shutting off the engine; 2) Within 5 seconds, quickly pull the left light lever toward you once; 3) Get out, lock the door, and leave. The headlights will stay on to light your way, with the system defaulting to turn off automatically after 60 seconds. Last time in my old neighborhood with no streetlights, I set a 120-second delay, which lit the way all the way to the building entrance. Be careful not to pull the lever too gently—you need to hear a confirmation sound for it to be successful. Sometimes if you don’t hear it, you’ll have to try again. This feature is especially helpful for female drivers wearing high heels.

Was this review help?
17
Share
Expand All
Arabella
02/03/2026, 10:56:49 PM

This feature is officially called Follow Me Home. Once you've used it, there's no going back, especially in underground parking lots: turn off the engine → power off → quickly pull the light lever on the left side (make sure the movement is substantial) → hear a beep → lock the car and leave directly. The highlight is that the lights will stay on until the set time ends, and the taillights and license plate lights also illuminate simultaneously, providing higher safety. Tests show that headlight height adjustment does not affect the function triggering at all. Once, forgetting to turn off the fog lights caused the setup to fail, but it was later discovered that the delay function is automatically disabled when the fog lights are on.

Was this review help?
17
Share
Expand All
OAugust
04/29/2026, 03:18:36 PM

As a three-year CS55 owner, here are three reminders: First, you must complete the lever operation within 5 seconds after turning off the power, otherwise you won't hear the prompt sound. Second, go to the settings to adjust the time—don't foolishly stick with the default 30 seconds; I set mine to 90 seconds, which is just enough to open the garage door and grab packages. Third, in winter when the temperature drops below -15°C, the system automatically disables this feature to prevent battery drain. The operation mantra is just nine words: Turn off fast, pull lever hard, lock and go. I use this lighting when taking my kid to evening extracurricular classes, saving me the hassle of pulling out my phone flashlight.

Was this review help?
20
Share
Expand All
More Q&A

What Causes the Engine Warning Light to Illuminate in a Volvo XC60?

There are primarily 7 reasons why the engine warning light illuminates in a Volvo XC60: Sensor Malfunction: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may be damaged, have poor contact, or experience signal interruption. When the car's ECU cannot accurately obtain engine data, the engine warning light will illuminate. Fuel or Oil Quality Issues: Failure to use the fuel or oil specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor Combustion of Air-Fuel Mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues like faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion. Turbocharger Issues: Problems with the intake turbo piping or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake Issues: If the car's intake system is compromised, it may lead to engine pipe blockages, and in severe cases, the engine warning light will illuminate. A dirty or uncleaned air filter can cause intake problems. Exhaust Issues: Exhaust system faults can also trigger the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is the most frequent culprit, often damaged by leaded gasoline, improper lubricant additives, physical impacts, or fuel system issues. Anti-Theft System Malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the anti-theft system may prevent the engine from operating normally, and the warning light will illuminate. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. If there are issues like shaking or black smoke, avoid restarting the engine. Note: Never restart the engine if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the ON position (without pressing the clutch). The car will enter self-diagnosis mode. Wait 5-10 seconds to see if the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
115
Share

What are the differences between forged, cast, and flow-formed wheels?

Flow-formed wheels are significantly more affordable than high-end forged wheels while offering comparable strength and quality, making them a middle-ground option between casting and forging. Forged wheels, on the other hand, are stronger and utilize military-grade aluminum, resulting in lighter weight. Below are the characteristics of cast wheels: 1. Feature one: Cast wheels combine the advantages of forging, extrusion, stretching, bending, ring rolling, cross rolling, and other processes, offering high quality, excellent flexibility, and lightweight properties. 2. Feature two: Flow-formed wheels maintain metal density and overall dynamic balance, allowing for sufficient stiffness while significantly reducing material thickness. This makes the wheels lighter and more durable, with a weight reduction of up to 15% compared to conventional low-pressure cast aluminum wheels of the same size.
102
Share

Can Electric Cars Drive Through Water?

Electric cars can drive through water for a short time, but the water depth must be noted. Below is relevant information about new energy electric vehicles: 1. Power Source: The power source provides electrical energy to the driving motor of the electric vehicle, which converts the electrical energy from the power source into mechanical energy. Currently, the most widely used power source is lead-acid batteries. However, with the advancement of electric vehicle technology, lead-acid batteries are gradually being replaced by other types of batteries due to their low energy density, slow charging speed, and short lifespan. 2. Composition: This includes the electric drive and control system, mechanical systems such as the drivetrain, and working devices designed to accomplish specific tasks. 3. Core: The electric drive and control system is the core of an electric vehicle and the biggest difference that sets it apart from internal combustion engine vehicles.
113
Share

What is the original spark plug model for the 2017 Passat 330?

The original spark plug model for the 2017 Passat 330 is the Volkswagen OEM model NGK-PFR7S8EG. Here is some extended information: 1. Introduction: The car spark plug (sparkplug), commonly known as a sparking plug, functions by discharging the pulsed high voltage electricity sent from the high-voltage wire (spark plug wire), breaking down the air between the two electrodes of the spark plug, and generating an electric spark to ignite the mixed gas in the cylinder. 2. Function: Every gasoline engine is equipped with spark plugs, one per cylinder, and some high-speed gasoline engines even have two spark plugs per cylinder. Although the spark plug is a small component, it is extremely important—without it, the engine would not be able to start.
101
Share

Is It Acceptable to Just Back into the Parking Space When Parallel Parking?

No. There are specific regulations for parallel parking, and violations will result in immediate failure. Below are the evaluation criteria for parallel parking: 1. Not following the designated route or sequence: 100-point deduction, failure. 2. Vehicle body crossing the line, failing to enter the space, or stopping midway: 100-point deduction, failure. 3. Exceeding 210 seconds to complete parallel parking: 100-point deduction, failure. Additional information: 1. Parallel parking became a mandatory test item for obtaining a small car driver's license (Subject 2) after 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. 2. Parallel parking is a key assessment point in the driver's test, requiring the driver to correctly reverse the vehicle into the parking space from both sides while in motion.
114
Share

Is it cheaper to buy a car at the end or the beginning of the month?

Buying a car at the end of the month does indeed offer greater discounts compared to the beginning of the month. For some models, even if the discounts at the end of the month are not significantly higher, they are generally similar to those at the beginning of the month. Therefore, it's clear that purchasing a car at the end of the month can yield better deals. Of course, there's no need to strictly wait until the end of the month, as buying earlier means enjoying the car sooner. Below are some tips on the best times to buy a car: 1. Tip 1: Sales pressure at the end of the month is indeed greater than at the beginning. At the start of the month, 4S stores are less eager to sell, so discounts are often smaller than at the end of the month. By the end of the month, if certain models haven't met their sales targets, significant discounts may be offered. May is the first key period to watch, as May Day is the first major holiday of the year, and many large-scale promotions by 4S stores are held during this month. 2. Tip 2: June, July, and August are traditionally slow seasons for car sales each year, partly due to weather conditions. Another subtle but important period is the last ten days of June, which coincides with mid-year reviews—a challenging time for 4S stores. Bank loans and annual sales targets can also drive price reductions during this time. The next key period is September and October, when the cool autumn weather is ideal for consumers to shop for cars, and for sellers, it marks the second peak in annual sales. 3. Tip 3: The third key period is December, as the year-end approaches. Many 4S stores typically haven't met their annual sales targets by then, leading to increased discounts to achieve their goals. This is because only by meeting these targets can they receive their "year-end rebate benefits."
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.