How to use the automatic parking feature in the Tiguan L?

What are the differences between the 2019 Civic and the 2021 Civic?

The differences between the 2019 Civic and the 2020 Civic are not significant, with only improvements in interior craftsmanship and enhanced design layering. Both the passenger space and trunk space are relatively large. Below are the relevant details: 1. High cost-effectiveness of the Civic: The Civic performs well in all aspects and offers great value for money. The appearance of the Civic is a major reason for its popularity, featuring a very youthful and sporty design with a sleek fastback body shape that appeals to young consumers. 2. Civic's exterior: The Civic has a refined appearance with elegant body lines and a beautiful waistline, almost comparable to coupe lines. The two halogen headlights at the front are particularly lively, making the lines and headlights two standout advantages and features of the Civic compared to the Lamando.

101

Share

What is the simplest and most accurate method for parallel parking on both sides?

The simplest and most accurate method for parallel parking on both sides is introduced as follows: Identify the starting point: Taking right-side parking as an example, the car should be positioned 1.2-1.8 meters away from the left line at the starting point, with the steering wheel straight and the car body parallel to the left line. When reversing, use the lower edge of the left rearview mirror as a reference. When the two coincide, turn the steering wheel fully to the right and continue reversing. Control the corner point: Watch the right rearview mirror. When you spot the corner of the parking space, observe the distance between the corner and the car body. If the distance is less than 30 cm, turn the steering wheel back half a turn and continue reversing. Once the car body enters the parking space and aligns parallel with the parking lines, turn the wheel back one full turn. If the distance is not less than 30 cm, do not turn the wheel back; keep reversing until the car body is parallel with the parking lines, then turn the wheel back one and a half turns at once. Align the stopping point: The stopping point is where you stop after entering the parking space. The reference method is the same as for the starting point. When you see the lower edge of the left mirror coincide with the shoulder line of the parking space, stop the car. Precautions for the Subject 2 driving test: Before starting, clean both rearview mirrors and the window frames from outside the car. Adjust the rearview mirrors and seat properly and secure them. Always remember to fasten your seatbelt. When taking the parallel parking test, choose the parking space at the very back if possible. You can stop and wait before entering the parking space. Once inside, there will be a broadcast in the car announcing, "Parallel parking test begins."

105

Share

How to Handle Annual Inspection with Demerit Points on Driver's License?

No annual inspection is required. According to the latest regulations from the Ministry of Public Security, drivers holding licenses for large buses, trucks, urban buses, tow trucks, or medium-sized buses and trucks (i.e., A1, A2, A3, B1, B2 licenses) do not need to undergo annual inspection for the current scoring cycle if they have no demerit points recorded. However, if there are demerit points on the license, the driver must undergo the annual inspection. The following are situations that require annual inspection: 1. Situation One: Motor vehicle drivers must, in accordance with laws and administrative regulations, periodically undergo inspection at the traffic management department of the public security authority. When drivers renew their motor vehicle driving licenses as stipulated in Articles 48 and 49 of these regulations, they must undergo inspection by the traffic management department of the public security authority. 2. Situation Two: Drivers holding licenses for large buses, tow trucks, urban buses, medium-sized buses, or large trucks must undergo inspection at the traffic management department of the public security authority within 30 days after the end of each scoring cycle. However, if there are no demerit points recorded during a scoring cycle, the inspection for that cycle is exempted. 3. Situation Three: Drivers holding licenses for vehicle types not specified in the third paragraph of this article, who are involved in a traffic accident resulting in death and bear equal or greater responsibility without having their motor vehicle driving license revoked, must undergo inspection at the traffic management department of the public security authority within 30 days after the end of the current scoring cycle.

110

Share

Can I Add Mineral Water to the Windshield Wiper?

You cannot add mineral water to the windshield wiper. Mineral water contains many minerals, and if you add it over a long period, the minerals in the water will precipitate in the container for the wiper fluid, and in severe cases, it may even clog the spray nozzle. It is recommended to use proper windshield washer fluid. Functions of windshield washer fluid: 1. Cleaning performance: Windshield washer fluid is formulated with various surfactants and additives. Surfactants usually have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt; 2. Anti-freezing performance: The presence of alcohol and ethylene glycol can significantly lower the freezing point of the liquid, thus providing an anti-freezing effect and quickly dissolving frost; 3. Anti-fog performance: A single-molecule protective layer is formed on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent, with a clear field of vision.

111

Share

How many points are deducted for forgetting to turn on the turn signal when turning left?

Failure to use the turn signal when turning a motor vehicle results in a fine and a deduction of 1 point. Below are specific details about point deductions for driving violations: 1. Deduction of 1 point: Not yielding properly when meeting another vehicle or reversing; not driving large passenger vehicles, electric vehicles, cranes, or vehicles with trailers as required during the probationary period; not towing trailers or pulling vehicles as required; not installing vehicle license plates as required; not carrying a driver's license or vehicle registration; riding a two-wheeled motorcycle without wearing a safety helmet; carrying passengers on a lightweight motorcycle or carrying children under 12 on the rear seat of a two-wheeled or sidecar motorcycle; driving without properly closing the doors or cargo compartment; smoking, eating, or engaging in other behaviors that hinder safe driving while operating a vehicle; not driving as required on roads without a centerline or designated lanes for motor and non-motor vehicles; small passenger vehicle drivers not wearing seat belts as required; other violations related to vehicle loading. 2. Deduction of 3 points: Operating a motor vehicle on the road without undergoing regular safety technical inspections as required; driving medium-sized or larger passenger or cargo vehicles, or hazardous material transport vehicles on roads other than highways or urban expressways, or driving other motor vehicles at speeds exceeding the limit by less than 20%; driving a truck with cargo exceeding the approved load capacity by less than 30%; driving a motor vehicle on a highway below the minimum speed limit; driving a motor vehicle prohibited from entering highways onto a highway; driving a motor vehicle on a highway or urban expressway without using the designated lane; driving a motor vehicle through a crosswalk without slowing down, stopping, or yielding to pedestrians as required; driving a motor vehicle in violation of prohibitory signs or markings; carrying passengers in a vehicle (excluding buses or school buses) exceeding the approved capacity by less than 20%; driving a motor vehicle while towing a trailer in violation of regulations; not using lights or setting up warning signs as required after stopping due to a vehicle malfunction or accident on the road; driving a motor vehicle without properly overtaking, yielding, or driving in the wrong direction.

108

Share

Why Does the Chassis Squeak When Going Over Bumpy Roads?

Due to loose screws connecting chassis components or abnormal noises from shock absorbers, the chassis may squeak when going over bumpy roads. Possible causes of abnormal noises when the car is bumpy: Prolonged driving and turning can cause excessive wear inside the ball joint, resulting in excessive clearance and abnormal noises. The function of the lower control arm is to support the tire, so how can it cause abnormal noises? The lower control arm has two positions with rubber pads, and another position is where the ball joint is installed, mounted on the steering knuckle. Prolonged driving and steering can cause wear on the ball joint and rubber pads, leading to excessive clearance and abnormal noises when driving on uneven roads. Methods to solve abnormal noises when the car is bumpy: The solution is to replace new parts and install a new control arm, which can directly resolve the issue of abnormal noises.

106

Share

How to use the automatic parking feature in the Tiguan L?

What are the differences between the 2019 Civic and the 2021 Civic?

What is the simplest and most accurate method for parallel parking on both sides?

How to Handle Annual Inspection with Demerit Points on Driver's License?

Can I Add Mineral Water to the Windshield Wiper?

How many points are deducted for forgetting to turn on the turn signal when turning left?

Why Does the Chassis Squeak When Going Over Bumpy Roads?

How often should a major vehicle maintenance be performed?

What to Do When Water Leaks into the Car Due to Clogged Sunroof Drain Tubes?

What Happens When a Vehicle Runs Out of Urea?

Will Insurance Fully Cover a Parked Vehicle Submerged in Water?