···
Log in / Register

Why does it show as failed when I passed the subject one test?

6Answers
KateMarie
07/29/2025, 10:27:15 PM

It indicates that there is an issue with the examinee's test information. The applicant needs to promptly check the test records at the driving school to verify whether the subject one score in the records is a pass. Below is more relevant information: 1. The applicant can also directly inquire about the test results at the vehicle management office. If the vehicle management office shows a normal passing result, it indicates a network system issue, which does not affect the test score. 2. Passing standard: The full score is 100, and achieving a score of 90 or above within 45 minutes is considered a pass. The retake scoring standard is the same. 3. Each test session has two attempts, with a total of 5 test sessions, amounting to 10 test opportunities.

Was this review help?
116
Share
Percy
08/15/2025, 04:35:43 AM

I encountered a similar situation yesterday when helping someone check their results. They had completed and submitted the test, but the system showed it as a failure. This is often due to technical glitches. For example, the computer's network might have suddenly disconnected at the end of the exam, causing the data to not upload to the server in time and resulting in an error code. Alternatively, the driving test center's server might be undergoing backend maintenance, leading to synchronization delays. My advice is not to rush into retaking the test. Instead, go directly to the front desk of the test center and ask the staff to check the backend records. In most cases, it's a temporary system bug, and they can correct it on the spot. Always remember to take a screenshot after completing the test as proof to avoid disputes. If the backend records confirm you passed, they can update your status directly, saving you the hassle of going through the process again.

Was this review help?
10
Share
Expand All
MadelineAnn
10/21/2025, 02:18:18 AM

I took my driver's license test last year. After completing the subject one test, my score was decent, but the app on my phone showed 'failed'! It gave me a scare, but later I realized it was just a cache issue with the app—refreshing fixed it. Some people also forget to sign on the screen to confirm submission, but the exam rules require a signature for it to be valid. Or, if a single character in the name is entered incorrectly, the system automatically marks it as invalid. My advice is not to leave immediately after finishing the test—wait until the page shows 'submission successful' before exiting. Delays in updates on phones or computers are common; just check again after a few minutes. If there's really an issue, ask your instructor for help.

Was this review help?
17
Share
Expand All
GiselleLynn
12/04/2025, 01:45:43 AM

I've taken the subject one test several times. New students often mistakenly think that answering the questions correctly is all that matters. In reality, the exam has timeout rules, and only operations completed within the time limit for each question are considered valid; submissions without pressing the confirm key are regarded as incomplete; when the camera fails to recognize a face, the system defaults to a fail. Neglecting these small details will result in a failure. Carefully reading the examinee instructions and following the operational procedures are key steps. In case of misjudgment, you can promptly report it for verification.

Was this review help?
3
Share
Expand All
OJaxon
01/24/2026, 03:09:23 AM

We often encounter this situation when processing driver's license documents - it shows as unqualified but might actually be under review in the system. For example, exam results may sync slowly when dealing with large data volumes, or anomalies like unusually short answer times could trigger the anti-cheating system to flag them for review. Contacting the official DMV customer service to check your records can clarify things, as their database typically has a few hours' delay. If everything checks out, applying for a review process is simplified - no need to waste time retaking the test yourself.

Was this review help?
4
Share
Expand All
StClayton
04/20/2026, 02:12:28 AM

I suggest not to panic if you encounter a failed display. First, check if you logged into the wrong account or if the network signal is too weak to load the results. Then, use official channels such as the 12123 APP to inquire or call the vehicle management office for consultation. Occasionally, the system may misreport due to issues like power outages causing data loss, in which case you can apply to review surveillance footage for evidence. There are opportunities to retake the test, but it will waste time. Handling it early ensures an accurate record and peace of mind. This issue is often caused by technical oversights rather than an actual failure.

Was this review help?
4
Share
Expand All
More Q&A

Does shifting to R gear and stalling harm an automatic transmission car?

Brief instances won't cause damage, but frequent or prolonged occurrences will. The R gear is the reverse gear used when backing up, but it should only be engaged when the vehicle is completely stationary. Shifting into R while the car is still moving slowly can severely damage the transmission. Here's an introduction to automatic transmission gears: 1. L gear: Low gear limits speed. When climbing slopes, this gear maintains high RPM at low gear. 2. S gear: Sport mode allows free gear shifting but delays shift timing, keeping the engine at high RPM for extended periods, enabling low-gear high-RPM driving. 3. D gear: Drive gear is used for normal forward movement. 4. N gear: Neutral is for temporary stops. 5. P gear: Park gear should be engaged when parking to activate the parking brake and prevent rolling.
117
Share

Is the Borgward BX7 engine an EA888?

Borgward BX7 uses an engine produced by Foton. The BX7's engine is not an EA888, but it incorporates many technologies from the Volkswagen EA888 engine. The Borgward BX7 is equipped with a 2.0L turbocharged engine across all models. The engine model is 4G20TI1, with a maximum horsepower of 224ps, a maximum power of 165kw, and a maximum torque of 300nm. For daily maintenance of the Borgward BX7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
113
Share

Can traffic violations be handled with a photo of the vehicle license?

No, the original vehicle license and driver's license are required. Relevant regulations are as follows: 1. On-the-spot issuance: For a simplified penalty decision issued on the spot by a traffic officer, the violator must present the third copy (bank copy) within 15 days from the date of issuance to pay the fine at a bank. Failure to pay the fine on time will result in an additional 3% penalty per day, with the total additional penalty not exceeding the original fine amount. 2. Traffic violations: If a vehicle is detained by a traffic officer due to a violation, the violator must present the vehicle detention certificate, their driver's license (or ID card if the license is detained or the person has no license), and the vehicle license (or invoice and certificate of conformity) within 15 days to the enforcement station window for processing.
102
Share

Can I apply for a driver's license exam online?

No. To apply for a driver's license exam, you need to register at a driving school, or in some cases, at the traffic police brigade or vehicle management office. When registering, bring your ID card, 6 photos, and temporary residence permit. Applicants for a motor vehicle driver's license must meet the following requirements: 1. Height: Applicants for large passenger vehicles, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized passenger vehicles must be at least 150 cm tall. 2. Vision: Applicants for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams must have naked or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart.
114
Share

What should be noted when driving a motor vehicle through a residential area?

When driving a motor vehicle through a residential area, it is necessary to comply with the speed limit signs, drive at low speed, and always pay attention to the situation on both sides. In case of emergencies, stop and yield the right of way, and do not continuously honk the horn or accelerate forcibly. The following behaviors are prohibited when driving a motor vehicle: 1. Behavior one: driving when the door or compartment is not properly closed; hanging or placing items within the front and rear windows of the motor vehicle's cab that obstruct the driver's view. 2. Behavior two: making or answering handheld phone calls, watching TV, or engaging in other behaviors that hinder safe driving. 3. Behavior three: stalling or coasting in neutral when going down a steep slope.
103
Share

What is the minimum ground clearance of the 2021 Passat?

The minimum ground clearance of the 2021 Passat is 110 millimeters. It is highly recommended to install an engine guard plate. The purpose of installing an engine guard plate is to protect components such as the oil sensor underneath, which are prone to damage from impacts. 1. Minimum ground clearance refers to: the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles like stones and stumps without collision. Regarding minimum ground clearance, in previous standards, there were regulations specifying it to be approximately between 150-160mm, but current standards have eliminated this mandatory requirement. 2. The impact of minimum ground clearance size: the larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which can increase stability.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.