How to Turn on the Low Beam Headlights on the Qoros 5?

[StRafael]

To turn on the low beam headlights, pull the lever located below the left side of the steering wheel towards you with your fingers. Pushing it gently forward will switch to the high beam, at which point the low beam icon on the dashboard will change to the high beam icon. Here are some additional details: 1. Currently, vehicle light switches are mostly lever-type or rotary-type switches, with lever-type being the most common. Drivers may sometimes be unsure whether they are using high beams or low beams during night driving. In fact, owners can identify this by the illuminated indicator on the dashboard. The difference between the low beam and high beam indicators is quite obvious: the low beam icon has light lines pointing downward, while the high beam icon has light lines pointing straight ahead. 2. Owners must be careful not to mistakenly use high beams as low beams. In the following situations, high beams should be immediately switched to low beams: a. when there is an oncoming vehicle; b. when the distance to the vehicle ahead in the same direction is relatively close; c. when the road is already sufficiently illuminated; d. when crossing railway intersections or returning to busy streets.

[GenevieveLee]

Having driven the Qoros 5 for so long, turning on the low beams is actually quite straightforward. After getting in the car, locate the control stalk on the left side of the steering wheel, which usually has a knob or button. Rotate it to the position marked with a small light icon (resembling a downward beam symbol), and this will activate the low beams. Some configurations might have an automatic headlight feature—just turn it to the AUTO setting, and the car will turn on the lights based on ambient light conditions. Remember to make it a habit to check the lights every time you get in the car, especially during dusk or rainy weather when poor visibility makes driving without lights risky. My experience is to test the brightness when parking to ensure the bulbs aren’t burnt out. If you forget to turn on the lights, your navigation system might issue a warning, or worse, you could get fined by the police. Safe driving is the top priority, so confirming the lights are on before starting the engine gives peace of mind. Developing this small habit makes the journey much safer.

[OMelanie]

As a young owner just getting started with the Qoros 5, I quickly learned how to turn on the low beams. There's a knob on the left-hand control stalk—just give it a gentle twist; it's usually positioned near the small light or daytime running light symbol. If you have the automatic version, simply turn it to AUTO for hassle-free operation, as the lights will turn on and off based on ambient conditions. During my first few night drives, I was a bit nervous, but I found that turning on the lights significantly improved visibility, helping me avoid collisions with other vehicles. Now, when chatting with friends about cars, I always remind them not to accidentally switch on the high beams—it’s blinding and unsafe. The Qoros 5’s design is quite user-friendly, with intuitive controls that even beginners can master in a minute. Keeping the lights in proper working order also saves energy, as the LED lights consume less power and last longer. After a few practice runs, it becomes muscle memory.

[DiAliyah]

When driving the Qoros 5, I prefer simple operations: to turn on the low beam, just rotate the knob on the left stalk of the steering wheel to the position marked with the small light symbol. For automatic models, selecting the AUTO gear is even more convenient. Driving at night without lights can easily result in fines or accidents, which is highly dangerous, so it's essential to ensure they are turned on. Regularly check the bulb condition to avoid burnouts that prevent illumination. The operation is quick and takes just a few seconds.

[LunaFitz]

As a car enthusiast, I find it quite interesting to operate the low beams on my Qoros 5. You twist the knob on the left control stalk near the steering wheel to a specific angle, where the icon resembles downward light beams. Some models come with auto-sensing function - just rotate to AUTO and the lights will activate intelligently. The headlight design is quite sophisticated, with LED low beams offering high efficiency and excellent brightness, plus adjustable height to avoid dazzling with high beams. It's important to develop the habit of turning on lights for night driving - safety first; driving without lights can easily cause rear-end collisions. Here's a tip: choose energy-saving bulbs when replacing them to extend lifespan. My car has added anti-fog film, making the lights more penetrating in rain and fog. These operational details truly reflect the vehicle's technological sophistication.

[DiRebecca]

I've been driving for many years, and turning on the low beam headlights of the Qoros 5 is quite simple: slowly locate the lever on the left side of the steering wheel, then rotate the knob to the position marked with the light icon. Make sure to turn on the lights in low-light conditions; newer models come with sensors that assist with the automatic setting. Safe driving is the golden rule—not turning on your lights can easily reduce visibility and lead to accidents. During regular maintenance, have the lighting system checked to ensure reliability. Take it step by step, no need to rush.