How to Turn on the Heating Function of Baojun 510 Air Conditioner?

[RuthMarie]

Baojun 510 Air Conditioner's heating method is as follows: 1. Plug in the Baojun 510 air conditioner power socket. 2. Press the "On/Off" button on the Baojun 510 air conditioner remote control. 3. Press the "Mode" option on the Baojun 510 air conditioner remote control to switch to "Heating Mode". 4. Press the "Fan Speed" option on the Baojun 510 air conditioner remote control to set the fan speed. 5. Select the "Adjust" option on the Baojun 510 air conditioner remote control to set the temperature. Note: When turning on the cooling, the air outlet should face upward; when turning on the heating, the air outlet should face downward. Prolonged use of the air conditioner will cause excessive pressure on the condenser, resulting in wear and tear on the refrigeration system. Therefore, each use of the air conditioner should not be too long. If the temperature inside the car reaches a comfortable level, the air conditioner can be turned off.

[BellaAnn]

I've been driving a Baojun 510 for five years, and heating in winter is straightforward: After starting the car, wait for the temperature gauge to rise to the middle position—this means the engine has enough heat. Then, rotate the temperature knob on the center console, which is marked with blue and red indicators, to the hottest position in the red zone. Next, press the airflow direction button and choose the mode that blows air at the feet and windshield—this is the most practical, as warm feet keep the whole body from feeling cold, and the windshield won’t fog up. Start with the fan speed knob at level two, then adjust it down once the vents start blowing hot air. A key tip: remember to turn off the AC light—it’s for cooling in summer, and leaving it on wastes fuel unnecessarily. Also, pay attention to the cabin air filter and replace it every six months; otherwise, the warm air may develop a musty smell, and heating efficiency will drop.

[SanPiper]

In our northern regions where temperatures drop below minus ten degrees Celsius, the heating system of the Baojun 510 is crucial. Don't rush to turn on the heater during a cold start in the morning; let the engine run for three minutes to warm up first. Locate the temperature knob in the middle of the air conditioning panel and turn it directly to the hottest red zone. Then press the airflow direction button to switch to the foot vent mode, allowing the warm air to rise evenly from the bottom. Set the fan speed to maximum initially, then reduce it to medium after five minutes. Remember to check the air recirculation mode—using the internal circulation heats up the cabin faster, but switch to external circulation after half an hour for fresh air. If you still feel cold with the heater on, check the coolant level, as insufficient antifreeze can directly affect heating performance.

[McAdaline]

New drivers, don't overcomplicate using the heater: Start the car, wait for the coolant temperature gauge to rise (about 3-5 minutes). Find the temperature knob in the row of controls on the right side, turn it all the way to the red (right) direction. Then press the fan speed + button to increase airflow - don't worry if cold air comes out initially, heat exchange takes time. For air direction, recommend using the combined windshield/feet mode. Don't press the AC light button - that's the air conditioning compressor switch. If there's a musty smell, it might be mold from residual moisture left after last using the AC - closing windows and running the heater for 30 minutes can help. Remember to clean the AC ducts during regular maintenance.

[EmmaLynn]

Owners of the Baojun 510 at home share: Heating doesn't consume fuel, it relies on the residual heat from the engine. The operation is divided into three steps: After starting, wait for two kilometers until the water temperature is normal, turn the temperature knob to the red high-temperature zone (above 25°C), and select the foot vent mode + medium air volume. Special reminder: A dirty air filter can affect heating efficiency, I replace it with a new one every year before winter. Northern owners should remember to replace the radiator antifreeze with a -35°C grade, as a well-circulated cooling system heats up faster. After warming up with internal circulation, switch to external circulation appropriately for ventilation to avoid drowsiness from high carbon dioxide concentration. Before turning off the air conditioner in winter, it's best to switch to external circulation and blow for 5 minutes to prevent pipe frosting.

[MartinDella]

Real-world test of Baojun 510 heating system: When engine coolant reaches 90°C, air vent temperature can achieve 50°C. Usage notes: Avoid activating when coolant temperature is insufficient - harms engine and blows cold air. Temperature knob offers 16-level adjustment, rotating from blue zone (middle) to red zone (right). High fan speeds create noticeable noise; level 3 recommended for optimal balance. HVAC system includes PM2.5 filtration, effectively filtering haze during winter heating. Pro tip: Directly activate defrost mode for foggy windshields - more comfortable than cold air defogging. Monitor vent temperature closely; reduced heating efficiency may indicate clogged heater core or insufficient coolant, requiring immediate pipe inspection.