How to Turn Off the Golf's Daytime Running Lights?

[WyattLee]

Golf daytime running lights cannot be turned off as they are a safety feature for daytime driving. Using daytime running lights during the day enhances the visibility of moving vehicles, helping drivers to take timely action in various situations and keeping their attention focused, especially for fatigued drivers. Below is additional information about daytime running lights: 1. Daytime running lights also have a control box. Ensure the control box is securely mounted, preferably away from hot coolers, as this can reduce the lifespan of the lights. 2. Install the daytime running lights in their designated location, secure them properly, and route the wiring into the engine compartment. During wiring, be careful to avoid any friction. 3. While purchasing daytime running lights enhances driving safety, installing them requires some modifications to the car's electrical system, which may pose certain electrical safety risks. 4. When driving at night with headlights on, the daytime running lights automatically switch to a dim, energy-saving mode to avoid dazzling oncoming drivers.

[PenelopeRose]

A few days ago, I helped my cousin with his Golf. Turning off the daytime running lights is actually quite simple. First, start the car but don't drive it. Press the multifunction button on the right side of the steering wheel to enter the menu interface, then find the lighting options in the vehicle settings. There, you'll see a switch for the daytime running lights—just turn it off. If it's a base model without these buttons, don't worry. Try holding the outermost BCM button on the left light lever for five seconds, and the dashboard will prompt that the setting was successful. A reminder: Volkswagen models have daytime running lights that default to on after startup. To completely turn them off, you can only adjust it in the vehicle settings, so don't waste time looking for a physical switch.

[HaleyAnn]

While driving, I noticed the Golf's daylight running lights were particularly dazzling. After some research, I found two solutions. For models with LCD instrument clusters, simply enter the settings menu while parked and turn off the daytime running lights option. For vehicles with mechanical instrument clusters, it's a bit more complicated: after turning off the engine, rotate the key to the ignition-on position without starting the car, then quickly toggle the high beams five times within ten seconds, finally keeping them in the off position - this will deactivate the daytime running lights. There's also a crude but effective method: remove the SC16 fuse from the driver's side footwell fuse box, though this will disable the automatic headlight function, so remember to manually turn on the lights during rainy days.

[LilahDella]

To turn off the daytime running lights (DRLs) on the Golf, you need to do it through the system. After getting in the car, press the start button to power on (without starting the engine), then navigate to the external lighting option in the steering wheel menu to disable the DRLs. The location may vary depending on the model year, so look for keywords like TFL or Daytime Light in the Settings-Lights category. If the infotainment system has been updated, the operation path might have changed—consulting the owner's manual is the safest approach in this case. I recommend performing this operation before turning off the engine, as switching menus while driving is too dangerous.

[SanTucker]

Regarding the daytime running lights, it depends on the vehicle configuration. For the newer MQB platform models, you can directly set it in the car's system, such as the dedicated lighting management option in the vehicle menu on the central control screen. For the older PQ platform models, it's a bit more troublesome; you need to use a 5053 diagnostic cable to connect to the OBD port and modify the coding by unchecking byte 6 of the channel for taillights/driving lighting system. Actually, I recommend not turning them off, especially in rainy weather, as these lights can improve visibility by 30%. But if you insist on turning them off, note that after setting, you need to lock the car and let it sleep for half an hour for the changes to take effect.

[DeDylan]

Experience with the third-generation Golf: The daytime running lights switch comes in two types, physical and electronic. For models with automatic headlights, press and hold the 0 position on the light knob for three seconds to turn them off. For models without automatic headlights, you need to enter the electronic system. When parked, flick the high beam lever three times consecutively to enter engineering mode, then operate the menu after the wrench icon lights up on the dashboard. Special reminder: Don't randomly adjust parameters if you've modified matrix headlights. Last year, I saw a case where the headlights reported an error after programming. To be safe, it's better to go back to the 4S store and use a diagnostic tool for settings.