···
Log in / Register

What is the battery model of the Great Wall C50?

6Answers
LaSteven
07/28/2025, 10:10:45 AM

The battery model of the Great Wall C50 is 12V60Ah. The function of the battery is to store electrical energy to supply power for car starting, ignition, lighting, signaling, and audio-visual equipment. Taking the 2016 Comfort model of the Great Wall C50 as an example, its body dimensions are: 4669mm in length, 1775mm in width, and 1455mm in height, with a wheelbase of 2700mm. The 2016 Comfort model of the Great Wall C50 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 133PS, a maximum power of 98kW, and a maximum torque of 188Nm, paired with a 5-speed manual transmission.

Was this review help?
103
Share
McJoseph
08/11/2025, 02:43:16 PM

The battery model for the Great Wall C50 is typically a 60Ah maintenance-free battery, with common specifications like 6-QW-60. I've been driving this car for several years, and the battery size and capacity are clearly stated in the user manual. When replacing it, make sure to choose a matching model. Last time when my battery aged and had difficulty starting in cold weather, I measured the voltage with a multimeter and found it had dropped to 11 volts, so I quickly went to the shop to get a new one. It's recommended that car owners regularly check the battery condition, preferably testing it every six months to avoid being stranded on the road, which could affect driving safety. Turning off all lights and audio systems after parking can also help extend the battery's lifespan.

Was this review help?
5
Share
Expand All
VanLilliana
09/28/2025, 11:10:08 PM

As someone who frequently works on cars, the common battery type for the Great Wall C50 is 60Ah, with models like L2-400. When installing, remember to disconnect the negative terminal first, clean any corrosion from the terminals, and then secure the battery in place. Many owners neglect maintenance, leading to starting issues, so the cold cranking amperage (CCA) should be checked every two years. The normal voltage should be around 12.6 volts; if it drops below 12 volts, consider replacing it. The replacement process is simple, but safety comes first—use insulated tools to minimize risks. Using an incorrect model may cause circuit overload, so it's advisable to consult the original manual for confirmation.

Was this review help?
14
Share
Expand All
LoganFitz
11/12/2025, 12:05:38 AM

The standard battery for the Great Wall C50 has a capacity of 60 ampere-hours, which is practical for most vehicle usage. When I drive this car, the manual specifies this specification, so when purchasing a new battery, choose a matching product with the same size and parameters. For daily maintenance, remember to start the car monthly to charge the battery. If replacing the battery yourself, just find the corresponding model at an auto parts store. Installation is simple—align according to the positive and negative markings to avoid incorrect placement. A new battery should last two to three years without issues, but in cold weather, check the voltage in advance to ensure reliable starting.

Was this review help?
9
Share
Expand All
StLeonardo
01/02/2026, 01:46:27 AM

The battery capacity of the Great Wall C50 is approximately 60 ampere-hours, with a voltage of 12V, and the cold cranking amperage (CCA) value should be sufficient to meet starting demands. I often pay attention to battery parameters, as insufficient capacity can degrade performance, especially in winter. It is recommended to choose a model with a high CCA value, such as 800A or above, to enhance durability. Regularly use a battery tester to check internal resistance, which can detect early signs of degradation. The normal voltage range is between 12.5 and 12.7 volts; excessive discharge can shorten lifespan, so avoid leaving the car unused for too long. Matching the vehicle specifications is key to maintenance.

Was this review help?
4
Share
Expand All
MacIker
03/30/2026, 02:45:13 AM

I've been driving a Great Wall C50 for many years, and the battery model is usually labeled as 60Ah. Last time I replaced the battery, based on experience, I chose the 60Ah model from Fengfan brand, and it has worked flawlessly for three years after installation. Daily maintenance includes cleaning the terminals to prevent oxidation, and checking the battery fluid level before winter or opting for maintenance-free models for more convenience. Turning off all electrical devices such as heaters when parking can effectively extend the battery's lifespan. It's recommended to replace the battery every three years to avoid sudden failures. With the correct model and proper maintenance, you can ensure your car starts smoothly at any time.

Was this review help?
18
Share
Expand All
More Q&A

How to Solve the Engine Light Caused by Poor Fuel Quality?

If the engine light is caused by poor fuel quality, you can drain all the bad fuel and refill with high-quality fuel. In some cases, the engine fault light will turn off by itself after about half a minute of driving. Below is relevant information: Fuel quality is the main cause of the engine fault light: 1. The anti-knock property of gasoline is indicated by the octane number. The higher the octane number, the better the anti-knock property. For example, 97-octane gasoline has an octane number greater than 97. Leaded gasoline can cause lead poisoning in the oxygen sensor, so fuel quality is a major factor in insufficient engine combustion, leading to the engine fault light turning on. 2. The engine has specific requirements for fuel quality indicators, especially as regulations in various regions impose higher demands on engines, thus requiring higher fuel quality standards. When refueling, always use the appropriate fuel grade for your vehicle and avoid using inferior fuel. Additionally, always refuel at reputable dealers to ensure fuel quality; otherwise, it may cause damage to your vehicle.
115
Share

What to Do When Running Out of Fuel on the Highway?

Solutions for running out of fuel on the highway are as follows: 1. Maintain a high gear and exit the highway as soon as possible: It is not recommended to shift into neutral. Try to maintain a constant speed in a high gear, as most vehicles are most fuel-efficient at speeds between 80 to 100 kilometers per hour. Exit the highway immediately when you encounter an exit, as gas stations are usually located near highway entrances and exits. 2. If fuel is critically low, pull over and call for help: If the fuel level is very low, be sure to stop in the emergency lane, turn on the hazard lights, place a warning triangle, and then call 110 or 122 for assistance. While waiting, occupants should not remain in the vehicle. While calling for help, you can also try to flag down passing vehicles to buy fuel. If the vehicle manufacturer provides rescue services such as fuel delivery or jump-starting, the driver can call the manufacturer's hotline for assistance. 3. If there is a gas station nearby, walk to buy fuel: If you can see a gas station or service area within sight, you can also walk to buy fuel. However, do not push the car on the highway. After parking the car safely, walk along the outside of the guardrail to the gas station, purchase a small amount of fuel, return to the car to add it, and then drive to the gas station for a full refill.
105
Share

What are the Penalty Standards for Not Wearing a Seat Belt?

According to the relevant provisions in the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," the following penalties apply for driving without wearing a seat belt: 1. When driving on urban expressways, if the driver fails to use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 2. When driving on roads other than highways or urban expressways, if the driver fails to use the seat belt as required, a fine of 50 yuan will be imposed without demerit points. 3. Urban expressways refer to urban roads with a central divider, four or more lanes, and full or partial interchanges and controlled access, designed for higher-speed vehicle travel. If passengers fail to use seat belts as required while the vehicle is in motion, a fine of 5 yuan will be imposed. 4. When driving on highways, if the driver fails to use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 5. When traveling on highways, if passengers fail to wear seat belts as required, a fine of 20 yuan will be imposed. 6. When driving on urban roads with a speed limit below 50 km/h, if passengers fail to use seat belts as required and correct the behavior immediately after being pointed out, an oral warning will be issued.
116
Share

What are the 16 new regulations for car modification?

The content includes the following 5 points: 1. Wheel rim style: The new regulations have relaxed the rules for wheel rim modifications. As long as the size and specifications of the wheel rims match those on the registration certificate, the style can be changed. It is even acceptable for all four wheel rims to have different styles; 2. Installing roof racks and side running boards: This new regulation mainly targets SUV and MPV models. The height of the installed roof rack must be within 300 millimeters, and the width of the side running boards must not exceed 5 centimeters beyond the side profile of the vehicle; 3. Vehicle body color: If the vehicle body color is changed through painting or wrapping, the vehicle information must be updated at the vehicle management office within ten days. It is important to note that colors similar to those used by police cars, fire trucks, etc., are not allowed; 4. Grille and front/rear bumpers: Installing new grilles and bumpers must not alter the original length and width of the vehicle. Modifying the vehicle emblem is not permitted, and the bumpers must not have any obvious protrusions; 5. Roof racks can be installed: However, the installation height must not exceed 30cm, and modifications must be carried out under the premise of ensuring safety and stability for passenger vehicles.
114
Share

What engine is used in the BJ212?

The engine of the BJ212 is produced by Qingdao Lanqi Liuji Power Technology Co., Ltd. and is a domestically manufactured engine. The engine model of the BJ212 is LQ481QFB. The 1.5T version of the engine has a maximum power of 100 kW, a maximum torque of 200 Nm, and a maximum horsepower of 136. The 2.0T version of the engine has a maximum power of 155 kW, a maximum torque of 320 Nm, and a maximum horsepower of 211. For daily maintenance of the BJ212's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When engine oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
109
Share

What transmission does the Korando use?

Korando uses a 6-speed automatic transmission with manual mode. Its main function is to change the gear ratio, expand the variation range of driving wheel torque and speed, and allow the engine to operate under favorable conditions. Taking the 2016 Korando as an example, it adopts MacPherson independent suspension at the front and multi-link independent suspension at the rear. Independent suspension can improve wheel grounding performance, thereby enhancing handling and comfort. The 2016 Korando has body dimensions of 4410mm in length, 1830mm in width, 1715mm in height, with a wheelbase of 2650mm.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.