···
Log in / Register

How to Study for a B2 Driver's License After Receiving Points?

6Answers
MacKyle
07/29/2025, 01:23:12 PM

Drivers must attend a seven-day study session at the traffic management department of the public security authority in the jurisdiction where the driver's license was issued or where the violation occurred within fifteen days. Below is relevant information: 1. Handling Procedure: The driver must attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security authority in the jurisdiction where the driver's license was issued or where the violation occurred within fifteen days. After completing the study session, the vehicle management office must conduct an examination on road traffic safety laws, regulations, and related knowledge within twenty days. 2. Annual Review Content: Review the handling of traffic violation points; review the driver's physical condition; review the examination results of the safe driving course; only after all traffic violation fines are paid, the physical examination is approved, and the examination is passed can the points for the scoring cycle be cleared.

Was this review help?
114
Share
ArielLynn
08/14/2025, 04:12:33 AM

I have a B2 driver's license myself. Once, I accidentally ran a red light and got 6 points deducted, which resulted in receiving a notice to attend a training course. The learning process was actually quite simple—just register at the local traffic management department. Classes were usually scheduled on weekends, lasting two to three hours each session, over several consecutive days. The main content included reviewing traffic regulations, watching accident case videos, and discussing safe driving techniques. I attended with a mindset of acknowledging my mistake and ended up learning many details I hadn’t noticed before, such as right-of-way rules when turning. After passing the exam, my points were restored, but now I drive more cautiously and often remind myself not to speed. I’d advise others not to delay after getting points deducted—attending the course early can prevent further trouble. The training also offers a chance to meet other drivers and share experiences, which is quite meaningful. The entire process takes less than a week, and the key is having the right attitude.

Was this review help?
20
Share
Expand All
DiVivienne
10/13/2025, 02:38:05 AM

When it comes to handling points deduction for a Class B2 driver's license, I believe the process should be followed step by step. First, confirm how many points have been deducted. If it's less than 12 points, you can directly register for a training course at the local traffic management department. If it's 12 points or more, you might have to retake the driving test from scratch. After registration, wait for the notification of class schedules, which usually include several sessions on traffic regulations and safe driving. The exam consists of multiple-choice questions and scenario simulations, so paying close attention during the lessons is essential to pass. I recommend reviewing the traffic rulebook in advance and bringing all necessary documents to attend on time. Don’t panic after getting points deducted—this training actually helps solidify your foundation and avoid future violations. The entire process is either free or low-cost, but the key is not to delay updating your driving record. Daily habits like obeying speed limits and wearing seat belts can reduce the risk of point deductions. After completing the course and obtaining the certificate, your points will be restored, allowing you to drive with peace of mind.

Was this review help?
16
Share
Expand All
AxelFitz
11/26/2025, 02:37:16 AM

I've experienced the process of attending a point deduction course for my driver's license. When the point deduction notice arrives, you need to sign up for the course, which includes reviewing safety regulations, attending accident analysis lectures, and taking mock exams. The whole process takes about two days, with very low tuition fees, mainly aimed at reinforcing driving knowledge. After completing the course and passing the exam, the points are cleared. After attending the course, I became more cautious while driving and developed a habit of checking my vehicle's condition. Don't worry about scheduling conflicts—traffic departments usually offer weekend or evening classes for everyone's convenience. Handling it early brings peace of mind.

Was this review help?
5
Share
Expand All
SanValentina
01/16/2026, 09:17:04 PM

How to study after getting points deducted on a B2 license? The key is to take action. The first step is to confirm the point deduction situation and local study requirements, usually accumulating to a certain number of points requires attending a study class. After registration, attend classes to learn traffic rule details and accident prevention. It is recommended to take careful notes during class, the exam is simple but should be taken seriously. Once the completion certificate is obtained, the problem is solved. The entire process takes at most a week, the focus is not on punishment but to help you grow. After getting points deducted, driving requires more attention, such as driving slowly in the rain and avoiding fatigue driving. Studying also allows you to meet peers and exchange experiences, improving overall driving skills. I found it quite effective after doing it.

Was this review help?
3
Share
Expand All
Sally
04/12/2026, 11:24:44 PM

I've been driving for over ten years, and after getting points deducted on my B2 license, I had to take a course. The process includes registration, attending classes, and taking an exam. Registration can be done on the traffic management website or in person, requiring an ID and driving certificate. The course covers traffic rules, emergency handling, and safety education, with instructors using real-life cases to explain things clearly. Class schedules are flexible; I completed mine over a weekend. The exam is a multiple-choice written test, which was easy to pass. Completing the course quickly restores your points and improves driving habits, like now I check intersections carefully before turning. My advice is not to wait after getting points deducted; register quickly to avoid accumulating more points.

Was this review help?
14
Share
Expand All
More Q&A

Can Large-Displacement Motorcycles Be Licensed?

Yes, they can be licensed. The licensing procedure for motorcycles is as follows: After entering the licensing office, park the vehicle in the designated area in an orderly manner. Obtain the "Application Form for Motorcycle, Light Motorcycle, and Fuel-Powered Vehicle Permit" (hereinafter referred to as the Application Form), fill it out as required, and then proceed to the review window along with the licensing documents to wait for review in sequence. Upon passing the review, take the Application Form and relevant licensing documents to the vehicle inspection window to wait for vehicle inspection in sequence. After the vehicle passes inspection, take the Application Form and relevant licensing documents to the recheck window to wait for recheck in sequence. Upon passing the recheck, obtain the "Installation Notice for Motorcycle, Light Motorcycle, and Fuel-Powered Vehicle Permit" (hereinafter referred to as the Installation Notice). Take the Installation Notice and push the vehicle to the permit installation area, waiting for the call to install the permit. Large-displacement motorcycles require either an E-class or D-class driver's license. In China, there are three types of motorcycle driver's licenses: F, E, and D. The F-class license only allows the operation of light motorcycles with an engine displacement below 50CC. The E-class license permits the operation of any two-wheeled motorcycle, regardless of displacement. The D-class license allows the operation of all two-wheeled and three-wheeled motorcycles. Therefore, as long as you have an E-class license, you can operate all two-wheeled motorcycles, and there is no separate license specifically for large-displacement motorcycles. When riding a large-displacement motorcycle, it is important to note that when the motorcycle is still in a cold state, especially in winter, starting the engine and immediately riding at high speeds can lead to crankshaft wear and connecting rod bending within a year.
114
Share

What to Do When a Car Sunroof Leaks and Causes Water Accumulation?

First, check if the window waterproof strips are aged or loose, and replace them if necessary; inspect the door drainage holes for blockages and clear them if found. In most cases, sunroof leaks are caused by clogged drainage holes. A leaking sunroof can wet the roof lining, and in severe cases, water may even "pour" into the cabin from the sunroof. A sunroof leak can range from merely wetting the roof lining to causing extensive water accumulation inside the cabin. Apart from water entering through the sunroof, rainwater can also flow along the A-pillar or C-pillar to beneath the vehicle's carpet, forming pools of water there. If a car sunroof leak leads to water accumulation, because the paint thickness in the trunk is relatively thin, water can easily cause rusting in the trunk, potentially leading to perforation in severe cases. To prevent water from entering the trunk, pull the sealing strip to see if it comes off. If it is loose, apply sealant at the junction between the body and the sealing strip and reinstall it. If the trunk sealing strip is aged, replace it. If water is entering the cabin from the tail light sealing strip, replace the tail light sealing strip or apply specialized waterproof sealant at the seam between the tail light and the body. Before the rainy season arrives, conduct a thorough inspection of all potential leakage points on the vehicle and replace any aged or poorly sealing components. Taking preventive measures ensures a dry cabin environment during rainy days.
114
Share

What is the battery model for Mercedes-Benz car keys?

The battery models are CR2032, CR2025, etc. These are lithium-manganese dioxide batteries, named according to IEC standards. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F replacing R if it is square; 20 indicates that the battery diameter is 20mm; 32 represents a battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal usage conditions (sealed, room temperature, no moisture interference, etc.), the lifespan can be further extended to 8 years or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the lifespan will be. If the remote key battery runs out, the mechanical key can be used directly to unlock and start the vehicle. Car remote keys use button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each vehicle, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: This is one of the most commonly used car remote batteries. The battery voltage is 3V, while most car key batteries operate at 9V, so three batteries need to be replaced each time. Examples include Honda, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter 20mm, thickness 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016, but it is still used in some car keys. It is thicker than CR2016 but has a relatively higher storage capacity. CR2025 specifications: battery diameter 20mm, thickness 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium-manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is lithium metal, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are ethylene glycol dimethyl ether, propylene carbonate, and lithium perchlorate. It is shaped like a button, hence the name button lithium battery or lithium-manganese button battery. Button battery CR2450: Compared to the other three, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value of CR2450 is 0.2mA, mainly used in low-power electronic products. Generally, such batteries can provide an output current of 0.001mA to 5mA, with a continuous output current of up to 15mA and a flash output current of up to 30mA, meeting the requirements of most small electronic products for light emission, sound, and RF output.
118
Share

Does a five-seater car include children?

Five-seater cars do not include children. Five-seater car models: For five-seater car models, seating six adults or five children plus one child constitutes overloading. According to legal regulations, overloading is considered a traffic violation. Hazards of overloading: Illegal overloading is known as the number one killer on highways. It not only severely damages road and bridge infrastructure, easily triggering traffic accidents that endanger people's lives and property, but also seriously disrupts transportation market order and leads to abnormal development in China's automotive industry. It is imperative to further strengthen the governance of illegal overloading according to law.
108
Share

How many engine mounts are there in total?

There are 3-4 engine mounts in total. Method for replacing car engine mounts: Use a jack to support the engine; open the hood, remove the air filter cover and tube; remove the filter base; take out the old engine mount and replace it with a new one. Function of engine mounts: Eliminate resonance generated during engine operation; reduce hydraulic oil pressure. Once the engine mount is damaged, significant resonance will occur between the engine and the frame, causing the car body to shake and produce various noises. Generally, car engine mounts should be replaced every 6 years, but they must be replaced promptly once damaged.
114
Share

What is the use of OBD in a car?

OBD refers to the On-Board Diagnostics system. The following are the relevant introductions: 1. It locates and describes faults in specific parts or components to facilitate repairs. 2. It alerts for faults that may lead to excessive emissions, thereby notifying the increase in environmental impact due to pollutant emissions. 3. OBD1 in China only required compliance with Euro 3 emission standards before July 2010. After that, all vehicles were required to have OBD2 functionality, which includes additional alert features for excessive pollutant emissions, misfires leading to excessive emissions, deterioration of oxygen sensors causing excessive emissions, and degradation of catalytic converters resulting in excessive emissions.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.