How to Set Up the Auto-Lock Function When Leaving the Car?

What is the Moose Test for Vehicles?

Vehicle moose test is an important international standard for measuring vehicle safety. The name of this test comes from the moose, an animal distributed in the Scandinavian Peninsula of Northern Europe and most parts of North America, which often jumps out unexpectedly in front of vehicles and collides with high-speed vehicles, causing serious traffic accidents. The moose test is designed to evaluate a vehicle's ability to avoid obstacles. The method of the moose test is as follows: the vehicle enters the test area at a constant speed in a fully loaded state (four occupants, with corresponding weights in the trunk), and performs high-speed evasion without applying the brakes or accelerator. The test is conducted repeatedly by two testers in the front seats, gradually increasing the speed until the vehicle loses control. The speed at which the vehicle loses control is recorded, and then verified twice to ensure the reliability of the speed value.

116

Share

Which model is the BMW e90?

BMW e90 is the fifth-generation model of the BMW 3 Series, specifically the imported BMW 335i. This vehicle's internal code is e90, as many models in the BMW family have fixed vehicle codes. The BMW e90 maintains BMW's fine tradition of excellent handling, featuring very precise steering with virtually no play in the steering wheel. The dimensions of the BMW e90 are 4829mm in length, 1827mm in width, and 1463mm in height, with a wheelbase of 2961mm. In the BMW e90 series, the flagship version is the BMW 330i, equipped with the N52 series 3.0 naturally aspirated engine.

110

Share

How to Set Up the Auto-Lock Function When Leaving the Car?

The auto-lock function when leaving the car generally does not require manual setup. The car's smart key will automatically trigger the locking mechanism when it moves beyond a certain distance from the vehicle. This auto-lock feature is part of the anti-theft system, and different auto-lock/unlock settings can be selected in the configuration menu. To disable the auto-lock function: 1. Park the car and ensure all doors and the trunk are closed; 2. Turn the ignition switch to the ON position; 3. Within 20 seconds of turning the ignition to ON, press and hold the lock side of the door lock switch until you hear a beep after approximately 8 seconds; 4. Refer to the user manual for the function code, then press the unlock side of the door lock switch once to deactivate the auto-door lock function; 5. A buzzer sound will confirm the change within 3 seconds after modifying the function setting.

117

Share

What tires does the Honda Civic use?

The Honda Civic comes with two tire specifications: 215/55R16 and 215/50R17, which vary depending on the model configuration. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance, while also requiring high wear resistance, flex resistance, and low rolling resistance with minimal heat generation. The Honda Civic's body dimensions are 4756mm in length, 1804mm in width, and 1509mm in height, with a wheelbase of 2730mm. The Civic is equipped with Honda's Earth Dreams series turbocharged direct-injection engines, available in 1.0T and 1.5T powertrains.

108

Share

How to Open the BYD F3 Key?

The method to open the BYD F3 key: Pull out the mechanical key, then along the slot where the mechanical key is placed, forcefully pry open the outer shell of the key. After opening the shell, use a blade to pry out the battery, replace it with a new one, and then restore the remote control's shell to its original state. The BYD F3 is a compact car from BYD, with body dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, and a wheelbase of 2600mm. In terms of power, the 2018 BYD F3 still comes equipped with a 1.5L naturally aspirated engine, with transmission options including a 5-speed manual and a 6-speed automatic transmission.

117

Share

Where is the oil filter of Peugeot 408 located?

The oil filter of Peugeot 408 is generally located at the lower front of the engine. Open the engine hood, and near the middle-left side close to the driver's position, there is a pull ring—simply pull it open without twisting. The function of the oil filter is to remove impurities, gum, and moisture from the engine oil, delivering clean oil to various lubrication points. Engine oil is often referred to as the lifeblood of the engine. The dimensions of the Peugeot 408 are 4750mm in length, 1820mm in width, and 1488mm in height. The Peugeot 408 is equipped with three engine options: a low-power 1.6L turbocharged engine, a high-power 1.6L turbocharged engine, and a 1.2L turbocharged engine.

111

Share