How to reset the maintenance wrench on Chang'an Benben?

[XavierLee]

To reset the maintenance wrench on the Chang'an Benben, follow these steps: 1. Turn the key to the 'on' position and press the 'trip' button to switch the display to the trip interface. 2. Turn the key to the 'acc' position and hold down the 'trip' button. 3. Turn the key back to the 'on' position and wait for a few seconds until the maintenance light on the screen flashes twice, then release the 'trip' button. At this point, the maintenance light will remain on. 4. Continue holding the 'trip' button for about 3 seconds until the maintenance light resets. Taking the 2018 Chang'an Benben as an example, it is a micro car with the following dimensions: length 3730mm, width 1650mm, height 1530mm, wheelbase 2410mm, and a fuel tank capacity of 38 liters.

[LeEmilia]

I've been driving for many years, and dealing with the maintenance wrench warning light on the Changan Benben is actually quite straightforward. Just follow a few simple steps. First, turn off the engine and ensure the car is stationary. Locate the trip button on the dashboard behind the steering wheel and hold it down. Then, turn the key to the ACC or ON position without starting the engine. You'll see the wrench light start flashing or the dashboard change. Hold it for a few seconds, usually 5 to 10 seconds, then release the button, and the light will go off. If it doesn't work the first time, try a couple more times, as button positions might vary depending on the model year. Remember to do this promptly after each maintenance to avoid the light staying on and obstructing your view. Also, if the dashboard shows any abnormalities, it's best to check the wiring. Overall, it's not hard to learn, just make sure to perform the operation in a safe place without distractions.

[StHolden]

I've done this a few times, and clearing the maintenance reminder light on the Benben is super easy. First, turn off the ignition, then press and hold the trip reset button (the one you usually use to check fuel consumption). While holding it, turn the key to the accessory position, and wait until the wrench icon disappears before releasing. Done! Last time after maintenance, the shop forgot to reset it, so I tried it myself at home and succeeded on the first try. If you can't get it right, maybe you're not pressing the button correctly—just practice a bit and you'll get the hang of it. By the way, after clearing the light, the system automatically records the next maintenance interval. If left unaddressed, it will keep displaying, which can be annoying while driving but won't affect performance. Develop good habits—regular maintenance saves big money in the long run. I recommend keeping a simple tool handy for this.

[VonEmmanuel]

I'm always fascinated by car-related matters. Resetting the maintenance light on the Benben is simple, but you must be careful to avoid procedural mistakes. The key steps are: first turn off the engine, press and hold the TRIP button, then turn on the ignition and wait for the light to flash before releasing the button. If the light doesn't go off, it might be due to poor button contact or a system malfunction. In such cases, you can try disconnecting the battery for a few minutes before attempting the procedure again. If that doesn't work, it's advisable to visit a 4S shop to reset it with professional equipment to prevent deeper issues. Remember, the purpose of the maintenance system is to remind you of oil change intervals. Regular attention to maintenance can extend your car's lifespan and reduce major repair costs.

[JosieRose]

The maintenance wrench reset is quite important. If not handled, the daily reminder of maintenance due can affect your mood. When I drove my Benben, I performed the operation myself: after turning off the car's power, press and hold the mileage button, then turn on the ignition until the light disappears before releasing. The operation is simple and quick, taking only two minutes. Remember to confirm the key position is correct, otherwise it might fail. If the light stays on, it could be due to unupdated maintenance records or sensor issues—it's best to check the vehicle's condition to ensure there are no hidden problems. Regularly resetting the maintenance reminder keeps the car in good condition, giving me much more peace of mind during my travels.

[JohnnyLee]

I've researched car repair methods quite a bit. Resetting the maintenance light is usually done through button combinations. First, check the manual to confirm the button positions - typically the TRIP button. Turn off the ignition, then press and hold the button while turning on the electrical system. Wait 5-10 seconds before releasing, and the light should reset successfully. If unsuccessful, don't force it - it might indicate wiring aging requiring professional scanner reset. The maintenance system is designed to protect the engine by predicting the next service interval. After resetting the light, remember to maintain proper service frequency like oil changes. These are crucial for vehicle durability and can save on repair costs.