How to Reset the Maintenance Reminder on the Magotan

[VonAndrew]

Here are the steps to reset the maintenance reminder on the Magotan: 1. Press and hold the small wrench button on the instrument panel with your left hand. 2. Turn on the ignition with your right hand. 3. Release the small wrench button with your left hand and press the minute adjustment button on the time setting. 4. Turn off the ignition and remove your left hand from the time button. 5. Start the engine, and the maintenance reminder will disappear. Below is some information about the Magotan: The Magotan is a mid-size car introduced by FAW-Volkswagen, with dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, and a wheelbase of 2871mm. It is equipped with either a 1.4T or 2.0T turbocharged engine, with maximum power outputs of 110kw and 137kw respectively, paired with a 7-speed dual-clutch transmission.

[MacAdalynn]

My Magotan also showed the maintenance reminder the other day, and actually, you can clear it yourself. First, turn the key two clicks to the power-on position without starting the engine. At this point, the wrench icon will appear on the dashboard. Hold down the 0.0 button on the right side of the dashboard without releasing—I held it for about ten seconds last time, and the warning light went off by itself. If you have the newer digital dashboard, you'll need to find the vehicle settings in the steering wheel buttons, then enter the maintenance reset option and confirm. A quick reminder: make sure to turn off the AC and lights before shutting off the engine to ensure the reset data is accurate. After resetting, it's best to drive a bit to see if the reminder pops up again—once, I did it too quickly and it didn’t work, so I had to redo it. If you really can’t figure it out, just head to the 4S店—they can clear it with their computer in two minutes. Regular maintenance is good for the engine, and this reminder is actually a thoughtful nudge for car care.

[RobertFitz]

Just helped my colleague reset the maintenance reminder on his Magotan. This issue is quite common. The key is to locate the button with a decimal point on the dashboard, press and hold it after powering on the vehicle until the English reset prompt appears on the instrument cluster. For newer models, you might need to access the settings menu via the multifunction steering wheel buttons to reset it. Once, a customer's car still showed the reminder right after servicing—turned out the dealership forgot to reset it last time. Always check the manual when doing it yourself, as procedures vary by model year. If unsure, just drive to a repair shop—they can clear it in five minutes by connecting a diagnostic tool to the OBD port. Honestly, this reminder is useful—it periodically alerts us to change engine oil and filters, keeping the car in better condition.

[DavidFitz]

Don't panic when you see the maintenance reminder, resetting it on the Magotan is simple. First, power on the car without starting the engine, locate the 0.0 button on the right side of the dashboard, and hold it down until the reminder disappears. Note that for some model years, you need to turn off the ignition switch before performing this operation. After a successful reset, it's best to check if the oil life data has been updated. Once, I reset it but didn't confirm, and the reminder reappeared after three days of driving. For newer models with LCD instrument clusters, you'll need to find the maintenance settings reset in the vehicle information menu. Make sure not to press the brake pedal during the entire process, or the system will exit the reset mode. Doing it yourself saves both money and time, as going to the 4S shop would require at least half an hour of waiting in line.

[StOlivia]

Last month, I just cleared the maintenance reminder for my Magotan by myself and I'd like to share the experience: The most stable operation is when the car is turned off. Hold down the reset button on the dashboard and then power on the car. When you see the prompt flashing, it means the operation was successful. If the light is still on after the operation, it might be due to incorrect step sequence. For newer models, you need to enter the central control menu and manually confirm the reset in the maintenance settings. A friend's car still had the reminder after maintenance because the repair shop only changed the oil but didn't reset the system. Remember not to start the engine when doing it yourself, otherwise the reset will be interrupted. This reminder is thoughtfully designed to help avoid missing maintenance cycles. After resetting, drive for a while to test it. Once the system updates the data, the reminder won't appear again.

[McAugust]

Experience in resetting the Magotan maintenance light: Turn the key to the ignition position, immediately press the reset button when the maintenance indicator flashes on the dashboard. The exact button location varies by model year—older versions have it on the right side of the dashboard, while newer models may integrate it into the steering wheel controls. It's advisable to press the foot brake during the operation to prevent accidental starts. Once, a client's light remained on after resetting, which turned out to be due to unstable battery voltage. Beginners are better off following a video tutorial to avoid mistakes—like the time I pressed too quickly and had to repeat the process three times. If all else fails, driving to a repair shop is a hassle-free option, as their specialized equipment handles it effortlessly. This tip is quite handy—always note the mileage after resetting to better plan the next maintenance.