How to reset the maintenance light on gla200?

1 Answers
LauraLynn
07/30/25 6:08am
gla200 maintenance light reset operation steps: 1. Turn on the ignition switch to light up the instrument panel; 2. Press the left button of the multifunction button on the left side of the steering wheel until the total mileage interface is displayed on the instrument panel. Note that in this total mileage interface, within 5 seconds, press the answer and hang-up buttons simultaneously, and within 1 second, press and hold the OK button for 5 seconds without moving, until the instrument panel displays options such as vehicle data, then release all buttons; 3. Press the down button of the multifunction button on the left side of the steering wheel to select the Active Maintenance System Enhanced, press the OK button to confirm, read the remaining maintenance time, mileage, and oil information until the entire vehicle maintenance is completed, then press the OK button to prepare for the maintenance reset, the instrument panel will prompt that the entire set of maintenance has been completed; 4. By continuously pressing the return button, exit the maintenance reset interface on the instrument panel, return to the main interface of total mileage, and turn off the ignition switch.
Was this review help?
3
4
Share
More Forum Discussions

How many kilometers should the spark plugs of an Audi A6 be replaced?

Audi A6 spark plug replacement cycle: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The ground electrode of the spark plug is connected to the metal shell and is attached to the engine block via the cylinder head threads. The insulator mainly serves to isolate the metal shell and the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it breaks down the medium between the central electrode and the ground electrode to produce a spark, thereby igniting the air-fuel mixture in the cylinder.
2
5
Share

Where is the engine number located on a BMW engine?

BMW series engine numbers are located on the engine block, at the connection point between the front of the cylinder head and the engine block. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license contains the engine number, usually located on the second last line; The motor vehicle registration certificate will specify the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will specify the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only have one unique engine number, and each engine's number is different.
17
4
Share

Why is the reversing camera unclear at night?

Here are the reasons and solutions for unclear reversing camera images at night: 1. Poor sealing of the camera lens. When temperatures drop at night, moisture in the air condenses into water droplets on the camera, causing unclear reversing images. Use a hot air blower to blow on the camera for a few minutes to remove the moisture. Apply glue for sealing to prevent water seepage from recurring. 2. Dust or dirt on the camera lens. Clean it with a soft cloth. 3. Issues with the brightness and contrast of the central control display. Adjust the brightness and contrast in the vehicle system until the reversing image becomes clear. Below is additional information about car reversing cameras: 1. The car reversing camera system uses a wide-angle far-infrared camera installed at the rear of the vehicle, displaying clear images of rear obstacles on the in-car screen. 2. Its purpose is to allow the driver to see the rear situation on the display while reversing, avoiding accidents caused by the driver's inability to see behind the vehicle, thus ensuring safer reversing.
12
0
Share

Will the Han DM have automatic parking in the future?

The Han DM did not have an automatic parking function as of August 2021, but it may be updated with this feature in the future. Here are the details: 1. BYD Han DM: As the only plug-in hybrid model in the Han series, the BYD Han DM is the first attempt by a domestic brand in the field of pure electric/plug-in hybrid mid-to-large-sized sedans. 2. Configuration: It includes passive pedestrian protection, road traffic sign recognition, NFC/RFID key, built-in dashcam, driver's seat ventilation, OTA upgrade, adaptive high/low beam headlights, front multi-layer soundproof glass, adaptive floating Pad, remote driving, and a full-range transparent imaging system. However, compared to its competitors, the BYD Han DM also has some shortcomings in terms of configuration, such as fatigue driving reminder, front parking radar, variable steering ratio, steering wheel shift paddles, sport-style seats, electric seat memory, and rear independent air conditioning.
18
3
Share

How to Reset the Maintenance Reminder for the 2013 Classic Focus?

Focus maintenance personnel can press the vehicle's one-touch start button and hold down the SET button on the left side of the multifunction steering wheel until a beep is heard. Then, simply press the OK button on the right side of the multifunction steering wheel to cancel the maintenance reminder. More relevant details are as follows: 1. Exterior Design: The Focus adopts Ford's family-style design, featuring a "Martin" front grille paired with a hexagonal chrome-plated front grille and sharp headlights on both sides. Although the newer Focus models are more dynamic, the classic version still exudes a strong sense of fashion. The side profile features multiple parallel waistlines that highlight the Focus's unique character. The rear is adorned with signature taillights and a multi-layered design, constantly emphasizing its sporty appeal. 2. Configuration: The Focus comes standard with practical and user-friendly features such as front/rear center armrests, rear cup holders, hill start assist, multifunction steering wheel, automatic headlights, power-adjustable mirrors, heated exterior mirrors, and engine start-stop. Additionally, users can opt for advanced tech features like wireless phone charging, automatic parking, and ACC full-speed intelligent adaptive cruise control system based on their actual needs.
15
1
Share

Which Volkswagen model has letters on the front?

Volkswagen's SUV model with letters on the front is the Teramont. More details about this vehicle are as follows: 1. Exterior: The Teramont is a new large SUV under SAIC Volkswagen, heavily inspired by the design of the CrossBlue concept car. The new model features a dual-slat chrome grille that extends directly into the headlights. 2. Vehicle Specifications: The body dimensions are 5039*1989*1773 mm, with a wheelbase of 2980 mm. 3. Interior: The Teramont incorporates a design with very straight lines. The new model comes with a three-spoke flat-bottom steering wheel and a 12.3-inch full LCD instrument panel (exclusive to high-end models). The multimedia information display in the new model uses the App-Connect mobile interconnect platform, supporting Apple CarPlay and Android Auto. In terms of features, the new model will include adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, front seat heating/ventilation, and a panoramic sunroof.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.